Used Ciata 505 M for sale (69,842)

Condition: used, Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Podeilq Hqepfx Appegt -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. Pgsdpfxoz E Nh Nj Appjt The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - 8 tie-down points - Welded frame - Edge for ramps Net price: €4,764.71 / Gross price: €5,670.00 Article number: AZH230501830.02 Technical data: • Brand: Hapert Trailers • Model: Azure H-2 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 505 x 180 x 30 cm • External dimensions (LxWxH): 661 x 186 x 94 cm • Loading height of the floor: 64 cm • Permissible total weight: 3,000 kg • Unladen weight: 639 kg • Payload: 2,361 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a cargo net. • Aluminum side panels with robustly installed latches • Aluminum side panels anodized, double-walled • All side panels can be folded and removed • Steel corner posts, removable • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel extensions or front panel extension • Stable eccentric latches • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members for high point load capacity • Additional longitudinal struts continuously welded • All cross and longitudinal members lie on the ground • 12 tie-down brackets recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear for easier positioning of the ramp • Cargo net hooks on the hinge lower parts • Maintenance-free rubber spring axle from ALKO/BPW • Reversing automatic • ALKO/BPW overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center Pgedozu N Taspfx Appot _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° Pedpfxeu N Artj Appogt weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: Pgjdezg Il Sspfx Appjt - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: used, functionality: unexamined, Ferwood Code: RU0008188 - Manufacturer Code: MDX61B-0150-503-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service; please contact us. Psdezmhwhjpfx Appegt

Condition: new, Rexroth HDS02.2-W040N-HS32-01-FW MNR: R911190007 SN:7260205058674, unused in opened original packaging, 100% functional, scope of delivery as per photos Podpfotqa U Dex Appsgt

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor clamping rail: 2 pieces -Groove width: 16 mm, length 370 mm -Hole spacing: 460 mm / Ø 16 mm -Dimensions: 505/55/H70 mm Pgedst Rl U Espfx Appjt -Delivery/Price: complete -Dimensions: 505/55/H70 mm -Weight 3.4 kg/piece

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-1/DI1250 three-phase servomotor SN: 50388R1, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. Pgsdpfx Apey Npfbopst

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Pedpfxsz E Eb Sj Appegt

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Pjdpfxszrihxo Appegt - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: new, Siemens 1FW6060-0TB10-0KC1 torque motor, SN YFE9613094505001, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Pgodsx Dvb Aepfx Appst

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, empty load weight: 2,190 kg, loading space volume: 20.7 m³, loading space width: 6,000 mm, loading space length: 2,300 mm, loading space height: 1,500 mm, Price on request. The price applies ex works 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 4 units available in the short term, other RAL colors available upon request. Other designs and sizes available ex works Paderborn. You can view our stock on our website. Roll-off container according to DIN 30722-1 Technical description: • Internal dimensions: 6000 x 2300 x 1500 mm • Usable volume: 20.7 cbm • Unladen weight: 2190 kg • Base: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-wing door with safety lock Pjdez E Ncgjpfx Appogt • Container tested and approved according to DGUV Rule 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Base-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame round tube Ø 89 mm • Mesh hook • All moving parts lubricatable • Steel discharge rollers 159 × 6.3, length 300 mm • Inside and outside zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Unladen weight 2,190 kg • Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustration purposes only! For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,224 kg, empty load weight: 1,776 kg, loading space volume: 9.9 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 700 mm, Price available upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. 2 units in stock, RAL 7016 4 units available in the short term, other RAL colors available on request. Other designs and sizes available from stock in Paderborn. You can view our current stock on our website. Construction waste containers according to DIN standards. Technical description: * Internal dimensions: 6000 x 2350 x 700 mm * Usable volume: 9.9 cbm * Tare weight: 1776 kg * Floor: 5 mm Hardox 450 * Side walls: 3 mm Hardox 450 * Front wall angled upwards * All sheets and profiles continuously welded * Double-wing door with safety lock * Standard ladder according to UVV, screwed on, galvanized * Container tested and approved according to DGUV Regulation 114-010 * Floor-side wall connection 45° * Horizontal corrugations * Hook diameter 60 mm, S 355 * Hook height 1570 mm Pgedsz E Nb Aepfx Appst * Top frame, square profile * Lashing hooks * All moving parts greaseable * Steel drain rollers 159 x 6.3, length 300 mm * Inside and outside: 2-component epoxy primer, outside painted with 2-component polyurethane (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: ready for operation (used), Fanuc 0550544 Reduction gear for Robot R-2000iA 125L - Diameter: 340mm, used, normal signs of use, 100% functional, scope of delivery as per photos Podpor Nqr Dsfx Appsgt

Condition: ready for operation (used), Siemens SIMOTICS 1FK7063-2AF71-1RG0 synchronous motor SN: YFP7641267505009 - Encoder AM20DQ, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Pgjdpfx Apexptudspet

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EA1 synchronous servo motor SN:YFVN47747505002, used, minor signs of wear, 100% functional, scope of delivery as per photos Pgsdpfx Aovl U Dceppjt

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase possible. Pgsdpfoz E Na Eox Appjt 3 units in stock, RAL 7043 9 units available on short notice, other RAL colors available on request. Other versions and sizes available from our Paderborn warehouse. You can view our current stock on our website. Technical description: • Internal dimensions: 5500 x 2300 x 750 mm • Usable volume: 9.5 cbm • Tare weight: 1820 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • Front wall raised at an angle • All sheets and profiles continuously welded • Double-wing door with safety lock • Standard ladder according to UVV, screwed on, galvanized • Container tested and approved according to DGUV rule 114-010 • Floor-side wall connection 90° • Hook diameter 50 mm, S355 • Hook height 1570 mm • Top frame, round tube Ø 89 mm • Mesh hooks • All moving parts lubricated • Steel drain rollers 159×6.3, length 300 mm • Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,855 kg, empty load weight: 2,145 kg, loading space volume: 17.3 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery is possible by arrangement. Leasing/hire purchase options available! 2 units available on short notice; other RAL colors available on request. Technical description: • Internal dimensions: 6000 x 2300 x 1250 mm (internal length) • Usable volume: 17.3 cbm • Tare weight: 2145 kg • Floor: 5 mm S 235 steel • Side walls: 3 mm S 235 steel • All sheets and profiles are continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV Rule 114-010 • Warning markings according to DIN 67520 • Standard ladder, bolted on, galvanized • Floor-side wall connection 45° • Hook diameter: 50 mm, S 355 steel • Hook height: 1570 mm • Top frame: round tube, Ø 89 mm Psdpfx Apez E Na Sepogt • Mesh hooks • All moving parts are greaseable • Steel guide rollers 159 x 6.3, length 300 mm • Zinc phosphate primer inside and out; painted on the outside with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit, including 19% VAT.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,520 kg, empty load weight: 2,480 kg, loading space volume: 30.5 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price upon request. The price is valid ex warehouse, 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 1 unit available directly at the warehouse, RAL 7016. 2 units available in the short term, other RAL colors available upon request. Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN. Technical description: * Internal dimensions: 6000 x 2350 x 2165 mm * Usable volume: 30.5 cbm * Tare weight: 2,480 kg * Floor: 5 mm Hardox 450 * Side walls: 3 mm Hardox 450 * Without internal supports * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Regulation 114-010 * Standard ladder, screwed on, galvanized * Floor-side wall connection 45° Pgodoz E Nafspfx Appet * Warning markings according to DIN 67520 * Hook diameter Ø60 mm, S 355 * Hook height 1570 mm * Top frame: square tube * Net hooks * All moving parts lubricatable * Steel drain rollers 159 x 6.3, length 300 mm * Inside and outside: 2K epoxy primer, outside painted with 2K polyurethane paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sales excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 12 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,263 kg, empty load weight: 737 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,735 mm, loading space height: 1,800 mm, Price upon request. The price is valid ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible. 3 units in stock, RAL 7043 13 units available shortly, RAL 7043 Other designs and sizes available from our Paderborn warehouse. You can view our current stock on our website. Skip containers according to DIN standard. Technical description: Pgsdoz E I Uzopfx Appet * Internal dimensions: 3735 x 1720 x 1800 mm * Usable volume: 10 cbm * Tare weight: 737 kg * Bottom: 5 mm S235 * Sides: 3 mm S235 * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double-sided 3-point tilting bearing (bolts Ø45) * Stacking rail L-profile * Locking bar * Frame edges U 80x50x4 * Zinc phosphate primer inside and outside, painted on the outside with synthetic resin paint (80-100 μ) * Permissible total weight 10,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,920 kg, empty load weight: 2,080 kg, loading space volume: 13.8 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,000 mm, Price available upon request. The price is valid ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. 1 unit in stock, RAL 7043. Other versions and sizes available from stock in Paderborn. You can view our current stock on our website. Roll-off container according to DIN 30722-1 Technical description: •Internal dimensions: 6000 x 2300 x 1000 mm (internal length) •Usable volume: 13.8 cbm •Unladen weight: 2080 kg •Floor: 5 mm S 235 Pgedpfxoz E Nalo Appet •Side walls: 3 mm S 235 •All sheets and profiles continuously welded •Double-wing door with safety lock •Additional longitudinal braces for increased stability •Container tested and approved according to DGUV Rule 114-010 •Standard ladder, bolted, galvanized •Rounded floor-side wall connection •Hook diameter 50 mm, S 355 •Hook height 1570 mm •Upper frame, round tube, ∅ 89 mm •Net hook •All moving parts lubricatable •Steel discharge rollers, 159 x 6.3, length 300 mm •Zinc phosphate primer inside and outside, painted externally with synthetic resin paint (80-100 μ) •Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! For any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,092 kg, empty load weight: 908 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,875 mm, loading space height: 2,000 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. 1 unit in stock, RAL 7043 Podpfx Ajz E I Uusppsgt 10 units available in the short term, other RAL colors available upon request. Other models and sizes available ex warehouse Paderborn. You can view our stock on our website. Skip containers according to DIN standard. Technical description: * Internal dimensions: 3875 x 1720 x 2000 mm * Usable volume: 10 cbm * Tare weight: 908 kg * Base 5 mm S235 * Sides 3 mm S235 * 2 steel lids, torsion bar spring, can be raised vertically * All sheets and profiles are continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double-sided 3-way tilting bearing (bolts Ø45) * Stacking edge, L-profile * Securing bar * Frame edges U 80x50x4 * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 750 mm, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery is possible upon agreement. *Leasing/hire purchase possible!* 6 units available on short notice, other RAL colors available upon request. Other designs and sizes are available from the Paderborn warehouse. You can view our stock levels on our website. Roll-off container according to DIN standards. Technical description: •Internal dimensions: 6000 x 2300 x 750 mm •Usable volume: 10.4 cbm •Unladen weight: 1945 kg •Floor: 5 mm S235 Pedjz E Ndkspfx Appsgt •Side walls: 3 mm S235 •End wall with a sloping upward angle •All sheets and profiles are continuously welded •Double-wing door with safety lock •Standard ladder according to UVV, screwed on, galvanized •Container tested and approved according to DGUV Rule 114-010 •Floor-side wall connection: 90° •Stringers made of U 90x55x4 mm •Stringer spacing: 750 mm •Hook diameter: 50 mm, S355 •Hook height: 1570 mm •Upper frame: round tube Ø 89 mm •Mesh hooks •All moving parts are greaseable •Steel roller bearings 159×6.3, length 300 mm •Warning markings according to DIN 67520 •Inside and outside: zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) •Permissible total weight: 15,000 kg Errors and prior sale reserved. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 11 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,175 kg, empty load weight: 825 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,500 mm, loading space height: 1,500 mm, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible. 4 units in stock, RAL 7043 1 unit in stock, RAL 2011 9 units available on short notice, RAL colors of your choice Other models and sizes available from our Paderborn warehouse. Pjdpfxsz E I Uno Appsgt You can view our stock on our website. Skip containers according to DIN standard. Technical description: * Internal dimensions: 3500 x 1720 x 1500 mm * Useful volume: 7 cubic meters * Tare weight: 825 kg * Bottom: 6 mm S235 * Sides: 4 mm S235 * With flap, 3 hinges, 2 flap closures * All sheets and profiles continuously welded * Container tested and approved according to DGUV rule 114-010 * Corner reinforcements * Double-sided 3-point tipping bearing (pin Ø45) * Stacking profile * Safety bar * Frame edges U80x50x4 * Zinc phosphate primer inside and outside, painted on the outside with synthetic resin paint (80-100 μ) * Permissible total weight: 10,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please send us a message or call us.