Used Ciata 1500 for sale (6,395)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Djdpelhwr Refx Adusla Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: ready for operation (used), functionality: fully functional, Good press for example high frequency use. I can sell also with one side High frequency wood bending generator. Plate is 1500*700mm. Dlsdpfx Adexlr U Ueusa

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 144465, overall weight: 2,025 kg, This is a KUKA 1500/3 T linear unit Hybrid slide for KRC4 Year of construction 2015 Dledju Ra N Espfx Aduja Total length: 4m

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, Machine with 30 nail feeders in three nail boxes. Freely programmable nail release and stop position, as well as nail release monitoring for 30 nail feeders. Quick hammer box adjustment with various hammer boxes. Usable template length max. 3200 mm. Includes nail filling platform, control cabinet, control console, and ifm SPS Ecomat 100. Dedpfxjxl D D Us Adujla

Condition: used, This listing is for theOhaus Harvard trip 1400/1500 series scales Dedpjxv Difjfx Adujla The unit is in full working condition and is ready for immediate use OHAUS Harvard Trip 1400/1500 Series Scales The OHAUS Harvard Trip 1400 and 1500 series are precision mechanical beam balances ideal for comparative and direct mass measurement. They operate on the Roberval principle, maintaining accuracy regardless of pan placement, and feature durable construction suited for education, laboratory, and industrial settings.

Condition: used, Year of construction: 1992, pressure 30 t chamfer lenght 1500 mm distance between columns 1240 mm control Konventionell throat 270 mm work height max. 900 mm Dledpfexwzfmox Aduoa total power requirement 4,5 kW weight of the machine ca. 1,2 t dimensions 1,8 x 1,33 x 1,86 m Hydraulic press brake - 2 x upper tools, 840 mm and 420 mm long - 1 lower tool, 400 mm long - Motorized backgauge - Foot switch - Two-hand release

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 Dljdpfx Adslzm Eqsuoa tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: excellent (used), workbench, work table, assembly bench, assembly table, work table -Manufacturer: Garant Perschmann, workbench with vice, solid design with drawers -Worktop: approx. 1500/700/H860 mm -6 drawers: lockable, division/height see photos Dljdpfxswk Dxxe Aduja -Vice: clamping jaws: 135 x 30 mm clamping width 185 mm -Transport dimensions: 1630/710/H1030 mm -Weight: 176 kg

Condition: used, Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Dlodsk Abrnopfx Aduja Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Dsdpfjtxinaex Adusla

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanicle Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Dsdpfexv Aflex Aduela Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Dlodjxl E Tqjpfx Aduea Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz Dlsdpfx Adeqwlmqjuoa machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information Bocker AHK 30/1500 • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height Dlodpew Tykbofx Aduea • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025

Condition: new, Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-600-540 RA1938 Dodpsk Ablwefx Adusla Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, mobile workbench -Mobile workbench: solid design Dlsdpfxsud Uugj Adusa -Width: 1500mm -Depth: 700 mm -Height: 840mm -Base: 4 swivel castors -Weight: 145 kg

Condition: good (used), Year of construction: 2012, Coolant Filtration System KNOLL KF 600 -1500 - CE marking - Coolant tank - Paper band filter - OP-3 control unit - Coolant pumps Dljdpoxrmzpjfx Adusa Dimensions: LxWxH 2.4x1.2x1.8 meters / Weight 800 kg Subject to errors and omissions.

Condition: like new (used), NNP 1500Kg Tumbler 1500Kg capacity, stainless contact parts, discharge through both sides, 3Ph Dlodsfq Rkxopfx Aduea

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Dljdpfx Adsxq Eyzsusa

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm Dedsxcbktjpfx Adujla max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm Djdpfx Aogayiwoduela electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2495mm Dlsdpoikn N Rsfx Aduoa -Width: 1500mm -Plate thickness: 40 mm -Plate: with supporting ribs (without straightening blade, not included) -Transport dimension: 2495/1500/H810 mm -Weight:2370 kg

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Dledpfxjxf Iklo Aduja

Condition: good (used), workbench, work table, assembly bench, assembly table, work table -Workbench: with vice, solid construction with drawers -Worktop: 1500/715/H890 mm -Drawer/door: lockable, without key -Vice: clamping jaws: 140 x 25 mm clamping width 230 mm -Transport dimensions: 1500/830/H1065 mm - Weight: 121 kg Dlsdpfewwg Ebsx Aduea

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs, on a solid base cabinet with drawers -Length: 1500mm -Width: 1005mm -Plate: with support ribs -Base cabinet: 3 cabinet doors, pull-outs see photos -Total dimensions: 1500/1005/H910 mm -Weight: 1200 kg Dedpfx Ajpbigxedusla