Used Hurlimann Xa 606 for sale (927)

Condition: new, Year of construction: 2026, Field of application: Construction Empty weight: 16.000 kg Generator capacity: 1.000 kVA Dimensions of cargo space: 606 x 244 x 259 cm CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel, Steel canopy Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Lredpfjxw Nc Tex Aphot = Remarks = Capacity: 1016kWh Nominal power kW: 800 Nominal power kVA: 1000 Nominal voltage (50Hz): 400 Protection: IP54 Heating cooling system: HVAC Max current (A): 1600 Nominal current discharge (A): 400 Discharge current (C): 1.5 Battery type: (NMC) On grid and off-grid applications: Yes

Condition: used, mileage: 175,000 km, power: 129 kW (175.39 HP), first registration: 04/2016, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: black, gearing type: automatic, emission class: euro6, total length: 6,150 mm, total width: 2,550 mm, total height: 3,110 mm, loading space volume: 20 m³, loading space length: 4,220 mm, loading space width: 2,480 mm, loading space height: 1,950 mm, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Swivel wall body system by Ewers Lredpfxezt D Rko Aphet * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * 4 rows of load securing * 1,500 kg MBB Palfinger tail lift * Ball-head trailer coupling, DIN towing eye pre-installed * short cab * 3 seats * leaf-spring suspension * automatic transmission * lane keeping assist

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. Lrjdpfxozukv Ns Aphjt In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Presses are fully operational and in use. Ledpoy Avb Asfx Aphsrt For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Lrsdpfxoz D Erbe Aphjt Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 In perfect working order Stored indoors since dismantling The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, operating hours: 1 h, Technical information Chassis type: articulated Make of engine: Electrisch Top speed: 20 km/h Functional Lifting capacity: 1.100 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information TÜV Marked: yes Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Delivery terms: EXW Additional information Please contact Robert Vijn for more information = Additional options and accessories = - 3rd hydr. circuit - Additional hydraulics Lrjdpfopitbbex Aphjt - Battery disconnector - Forks - Original colour - Quick coupler - Rotating beacon - Standard digging bucket

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, rotational speed (max.): 3,000 rpm, disc diameter: 400 mm, MEM Cobra lite edger. In good condition. 2 movable axles 18.5KW. Fixed axle 37KW or 11KW. Several new blades included. Ledpfx Apex Tzkkshort

Condition: good (used), Year of construction: 2010, Manufacturer: NEUHÄUSER Type: 2.224-0 Year: 10/42 Inclusion dimensions: 8500 x 1000 x 630 mm Electrical data: Lredpfx Apenqyx Eehjt 220/480 V; 8.6/4.95A; IP 54 Discharge height: 630 mm Delivery length: 8100 mm Shipping width: 650 mm

Condition: used, axle configuration: 3 axles, first registration: 06/2013, color: other, Year of construction: 2013, Empty weight: 6.457 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Lsdpfx Aoyuyb Ajphort Axle 3: left 10 mm right 10 mm

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Lrodezbiivopfx Aphjt

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Lrodpfxozm Ub He Aphst Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), axle configuration: 3 axles, first registration: 12/2007, suspension: air, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Unladen weight: 12,940 kg Payload: 21,060 kg GVW: 34,000 kg Technical condition: good Optical condition: good Lredpfszvzt Ijx Aphet Vehicle number: Low-bed trailer: 15 Faymonville / 3 axles, steerable, with remote control SAF / Extendable .: YA9TL35F02113453 SAF 3 x Steerable axles with remote control Unladen weight: 12,490 kg Total weight: 34,000 kg Length: 9.20 m, with extension 15.10 m + extension 20.40 m, total length 24.40 m Width: m = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Ledpjzzwmujfx Aphsrt Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, mileage: 603,000 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, color: other, gearing type: automatic, Year of construction: 2013, Axle 1: left 14 mm right 14 mm Axle 2: left 7-7mm right 7-7 mm Lrsdszzi Rrjpfx Aphot Axle 3: left mm right mm

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Lredezd U Diepfx Aphot

Condition: used, functionality: fully functional, Year of construction: 2005, fuel type: electric, E – Still R60 forklift – 60 / Kalmar Year of manufacture: 2005 Lrjdpfx Aszt Nuzsphot UVV inspection valid until: 07/2027 Battery: 2021 / HAWKER 80 Volt, Type 8 PZM 1240 Battery dimensions: 1495 x 995 x 780 mm Lifting height: 3800 mm Fork length: 2.1 m Fork adjustment Side shifter Including charger 80V 170A Still ecotron XM

Condition: used, Sandblasting Machine, Surface Cleaning Equipment, Sandblasting Cabinet, Used Machine Compressor: Manufacturer: Atlas Copco Lredjy H I U Nepfx Aphet Type: XAS 90 Year of manufacture: 1992 Max pressure: 8,5 bar Deutz engine Overall dimensions: Width: 1500 mm Depth: 3500 mm Height: 1300 mm Tank dimensions: Ø 630 × 1200 mm – 2 pcs Dust chamber dimensions: Width: 930 mm Depth: 630 mm Height: 1390 mm Sold in the condition shown in the pictures, with accessories.

Condition: as good as new (ex-display), Year of construction: 2008, operating hours: 133 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 360-3/1130 FlexPicker delta robot complete with IRC5 controller and machine vision system – Only 133 Operating Hours. The robot is capable of identifying randomly oriented products and picking them directly from a moving conveyor using ABB Conveyor Tracking and integrated vision technology. Ideal for: Pick & Place applications Food processing and packaging Confectionery industry Pharmaceutical products Plastic components handling Product sorting and orientation High-speed automation projects Condition Ex-display machine Only 133 operating hours New OEM battery installed Robot joints lubricated Robot calibrated Fully tested and ready for installation Scope of Supply ABB IRB 360-3/1130 FlexPicker robot ABB IRC5 controller Machine vision camera FlexPendant Complete cable set Robot stand / aluminium frame structure Installed Software Options Conveyor Tracking (606-1) DeviceNet Master/Slave Advanced RAPID PC Interface Socket Messaging Fieldbus Command Interface World Zones Path Recovery Independent Axis Logical Cross Connections Analog Signal Interrupt Electronically Linked Motors Fixed Position Events Multiple Axis Positioner Ledpszcp Egsfx Aphert Key Advantages Complete vision-guided FlexPicker package Conveyor Tracking included IRC5 controller Very low operating hours (133 h) Serviced and calibrated Ready for integration into production lines Additional photos, videos and controller backup available upon request.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Ljdpfxjzghc De Aphsrt Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 5,000 mm, total height: 1,500 mm, total width: 1,300 mm, input voltage: 400 V, overall weight: 800 kg, year of last overhaul: 2026, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, Ilapak SMART Horizontal Flowpack Packaging Machine, used. Condition: very good - like new Machine specifications: - Machine speed up to 100 cycles per minute (cpm) - Sealing jaw length 250mm, new straight blade - Acceptable dimensions of the packaged product: length: 50-550mm, width: 20-230mm, height up to 120mm - Adjustable forming shoulder - Maximum film reel length: 630mm - NPNB (No product no bag) system - Sensor for working with printed film - Overall machine length: 5m, width: 1.3m, height: 1.5m - Weight: 850 kg Additional systems: - Vacuum system for removing air from the package - Gusseting film folding Optional: - Printer - Labeling machine Lodpszugwisfx Aphort

Condition: excellent (used), mileage: 401,424 km, power: 162 kW (220.26 HP), first registration: 09/2009, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 5,510 mm, loading space width: 2,460 mm, loading space height: 2,440 mm, Year of construction: 2009, Equipment: tail-lift, General information Lrodsy Umq Eepfx Aphst Number of doors: 2 Cab: single Registration number: 1LRL362 Technical information Engine capacity: 4.764 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 5.820 kg Carrying capacity: 6.169 kg GVW: 11.990 kg Functional Tail lift: dholandia, 2000 kg Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Lodpfx Apoyz S T Sshjrt

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CON.07.10.0154, compressed air connection: 8 bar, input voltage: 230 V, total width: 1,329 mm, total length: 1,150 mm, total height: 1,725 mm, overall weight: 812 kg, pneumatic connection: 8 bar, Equipment: documentation/manual, 6-color pad printing machine from the manufacturer TAMPOPRINT, model Concentra 60-6 Max. printing area diameter (circle diameter) 55mm, total of 6 colors Year of manufacture 2010, weight 812 kg Air consumption 48 standard liters per cycle Good overall condition, machine fully functional, minimal air loss on one of the main valves. Visual condition as shown in the current photos. Scope of supply: TAMPOPRINT Concentra 60-6 as a stand model + Foot pedal + Hand crank for height adjustment of the tilting table + 6 used ink pots 60mm + 6 used printing rings (for the ink pots) + 2 used mounting tables (for ink pot and cliché mounting) + 2 used gripper tongs (for ink pot and cliché mounting) + 2 used pad coupling devices plus mounting screws (4 pad coupling devices still need to be purchased) + 1 heavy-duty hook for transporting the machine + Documentation (operating manual, parts list, wiring diagram) Option 1 6 additional used ink pots 60mm, EUR 420,- excl. VAT. Option 2 4 pad coupling devices (new) from the manufacturer, EUR 1,098,- Packaging: The machine can only be packaged by wrapping it completely in cardboard and bubble wrap; it will not be placed on a pallet. The pad printing machine can be inspected and tested in Pottendorf by appointment. Delivery: Ex works Pottendorf (Austria). Lsdpfjzwv Rwex Aphsrt For collection, only trucks with a tail lift are permitted; please note the machine's weight. The transport of this machine is at the buyer's expense and risk. Packaging costs EUR 120,- Selling price EUR 18,200,- excl. VAT. New price approx. EUR 70,000,-

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Lredpozimqxofx Aphjt

Condition: used, Year of construction: 2007, Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement. Lodpfx Aez A Ekhjphsrt