Used Hurlimann H-6200 for sale (56,428)

Condition: used, Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts Bwedpfxednca Hs Agtot -Dimensions: 335/560/H390 mm -Weight: 32 kg

Condition: ready for operation (used), Year of construction: 2001, A Grisnich and H&H Engineering receiving and intermediate storage bunker for the temporary storage of harvested products such as apples, potatoes, etc. is available. Number of bunker cells: 3, bunker cell capacity: 33t, number of conveyor systems: 2, conveyor system length 1/2: 59m/72m. This system is not intended for the long-term storage of harvested products but is designed exclusively as an intermediate transfer point for truck transport. Documentation available. An on-site inspection is possible. Bsdpfx Aszqfx Rogtswt

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Bjdpozizq Tjfx Agtswt Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Bwedezhadcepfx Agtet Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Bwodpfezg U Tijx Agtot Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), For sale is a Rietschle CL 25 VE vacuum pump from the renowned German manufacturer, Rietschle. This unit is designed for creating a vacuum in machines, production lines, and vacuum gripper and table systems. The pump is equipped with an oil tank with a level indicator and an electric drive. Its robust construction guarantees a long service life and reliable operation. The visual condition matches the photos – it shows normal signs of use. Technical data: Manufacturer: Rietschle Model: CL 25 VE Serial number: 325202 Country of origin: West Germany Capacity: 25 m³/h Rotational speed: 1400 rpm Maximum vacuum: ≥ 90% Bedpjzi Hf Ajfx Agtjwt Motor power: 1.1 kW (1.5 hp) Power supply: 380/220 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Applications The pump is used in various applications, including: CNC machines, woodworking machines, packaging equipment, vacuum tables, vacuum grippers, vacuum conveying systems, laboratory equipment, production lines. Advantages: robust construction, German-made, high capacity of 25 m³/h, durable, oil-lubricated rotary vane pump, oil level indicator for easy operation monitoring, easy installation and connection.

Condition: excellent (used), For sale: a Gebr. Becker DVT 40 vacuum pump from the reputable German manufacturer, Becker. This unit is designed for industrial applications, including CNC machines, woodworking machines, packaging machines, vacuum gripper systems, and other installations requiring vacuum generation. The pump is complete with an electric motor and is ready for connection. The visual condition matches the photos – normal signs of wear and tear consistent with its use. It is being sold as a used unit. Technical data: Manufacturer: Gebr. Becker, Wuppertal Model: DVT 40 Year of manufacture: 1978 Serial number: K685509 Capacity: 40 m³/h Maximum vacuum: 0.5 bar Bjdpfxszi Ha He Agtswt Motor power: 1.5 kW Rotational speed: 1420 rpm Power supply: 220/380 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Power factor (cos φ): 0.8 Applications: CNC machines Machining centers Woodworking machines Vacuum packaging machines Vacuum transport systems Vacuum grippers and tables Industrial automation

Condition: good (used), axle configuration: 2 axles, first registration: 06/2020, loading space length: 7,310 mm, loading space width: 2,500 mm, loading space height: 2,740 mm, total length: 10,160 mm, total width: 2,600 mm, total height: 4,030 mm, suspension: air, tire size: 455/40R22,5, color: other, Year of construction: 2020, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 2, Payload: 11850 kg, Tare weight: 6650 kg, Gross vehicle weight: 18500 kg, Chassis type: Full chassis, Suspension type: Full air, ABS, EBS, Body construction year: 2020, Refrigeration unit manufacturer: Frigo Block, Refrigeration unit model: ., Refrigeration unit: Diesel/electric, ATP condition: ., Wall thickness: 40 mm, Type of cooling: Refrigeration, Day/night cooling: Day/night cooling, Axle type: SAF = Additional Information = General Information Cab: Day cab License plate: 96-WX-GL Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Bedjzfy Szjpfx Agtowt Axle Configuration Tire size: 455/40R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Weights Unladen weight: 6,650 kg Payload: 11,850 kg GVWR: 18,500 kg Functional Loading platform height: 113 cm Refrigeration unit: Diesel and electric Wall thickness: 40 mm Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: €1,010 per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), For sale is a Rietschle CLFT 81 DV vacuum-pressure pump from a renowned German manufacturer. This is a dry-running rotary vane pump designed for simultaneously generating vacuum and compressed air. It finds application in packaging machines, printing machines, woodworking machines, CNC machines, pneumatic conveying systems, and many other industrial installations. The unit is equipped with a three-phase motor with a power of 3.0 kW and is mounted on a robust, compact frame. Technical data: Manufacturer: Rietschle Model: CLFT 81 DV (13) Year of manufacture: 1991 Country of manufacture: Germany Type: vacuum-pressure pump (dry-running, rotary vane) Capacity: 80 m³/h (50 Hz) Bodpeziw Rpsfx Agtowt Maximum overpressure: 0.5 bar Motor power: 3.0 kW Rotational speed: 1450 rpm Power supply: 3×380 V Continuous operation: S1 Serial number: 1375434 Application: packaging machines, CNC machine tools, woodworking industry, printing industry, pneumatic conveying, equipment requiring vacuum or compressed air. Condition: Used. Visual condition as shown in the photos. Robust construction, ready for further operation.

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Bedpfx Agjziw N Setjwt Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Used. Visual condition is consistent with the photos. Robust construction, ready for further operation.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Bwjdpfx Agsziyvhstjt Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: used, maximum load weight: 18,030 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 9,410 mm, loading space width: 2,470 mm, loading space height: 3,050 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, H&W HWZPS24 Tridem Curtainsider (Jumbo) ----* CODEXL Certified (EN12642-XL) * Fixed front wall * Sliding tarpaulins on both sides * 2 storage boxes * Chocks * Spare wheel * Fire extinguisher * Additional rear support ----* BPW axles with drum brakes * Wabco air system * Knorr TEBS braking system ----* Tire size: 435/50R19.5 * Technically permissible total weight: 24000 kg Bwsdpsy Dzgysfx Agtet * Tare weight: 5970 kg * Overall length: 11650 mm ----?Vehicle number: 12002/12001/12000----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Bodpfx Aoxwa S Eegtjwt

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges Bjdpfovvcqxox Agtjwt 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Impeller diameter: 1200mm Impeller material: Operating pressure: 2.94kPa -- (300 water mm) Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Height 2500 x width:2000 x length:3000mm Bwjdewin Eajpfx Agtst Weight:4400kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Condition: excellent (used), functionality: fully functional, dust, chip extraction fan 18.5kw 8700m3/h 4940Pa centrifugal fan. manufacturer: Klima Celje air flow:8700m3/h Bwodpfx Agehu Aw Hjtjt pressure:4940Pa motor power:18.5Kw 400v 50Hz speed: 2930 impeller diameter:700mm suction opening:250mm pressure side chimney:440 mm overall dimensions:800x1200x1500mm weight:ca 375kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 1999, operating hours: 43,019 h, functionality: fully functional, machine/vehicle number: 1127, overall weight: 750 kg, total length: 1,610 mm, total width: 970 mm, total height: 1,380 mm, power: 37 kW (50.31 HP), volume flow: 366 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER BS61 Screw Compressor 37kw 6.1m3/min 7.5bar. compressor For sale KAESER BS61 screw compressor in excellent condition. Maintained from new, serviced throughout. Bwjdeydr Igepfx Agtst last major service performed at 86009 operating hours Manufacturer: Kaeser BS61 Year of manufacture: 1999 serial number: 1127 Operating pressure: 7.5bar Power: 37 kW Capacity: 6.1 m3/min 366 m3/h Operating hours: standby: 86033h loaded: 43019 h Sigma Control control. engine speed: 1500 rpm Overall dimensions: 1610 x 970 x 1380 mm Tail weight: 750kg

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Bodpfx Aehfl Dmegtjwt Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 2007, volume flow: 42 m³/h, power: 1.5 kW (2.04 HP), Rietschle VLT 40 vacuum pump 42m3/h 150mbar ELMO Rietschle vacuum pump PICO 40m3/h for sale year of construction 2007 Mains voltage: 230/400 V 50 Hz 5.2/3 A IP55 Bwsdpferhwprex Agtst Total: 1,5 kW Speed: 1420 rpm Weight: 52 kg Air delivery: 42/50 m3/h

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Bwodpfxscvkalo Agtot Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: like new (used), 60 linear meters of Nedcon tire racking Bjdpfx Agji Hl T Ietjwt New & used, see pictures. Height: 3 m Depth: 50 cm Beam length: 3.7 m, beam capacity/shelf: 1000 kg Frame: Blue Beams: Blue, painted Negotiable price: € 5,250.00 net, ex warehouse Offer includes: + 16 units of pre-assembled frames, depth 50 cm, height 3 m + 90 units of beams, length 3.7 m, 1000 kg capacity/shelf + 180 units of locking devices + 64 units of concrete anchors Goods are in stock. Transport and assembly are available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30-50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & SALES For disassembly and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 40 linear meters of Nedcon pallet racking New item, see pictures! A top-quality racking system from the renowned manufacturer NEDCON - a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per shelf: 3050 kg Bsdpfx Agsfkgpwetowt Negotiable price: €6,990 net ex warehouse Offer includes: + 15 units of pre-assembled frames, depth 110 cm, height 5.5 m + 84 units of beams, length 2.7 m, 3050 kg load capacity per shelf + 168 units of safety locking devices + 30 units of concrete anchors Load capacity signs, documentation, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames in blue RAL 5019, infill panels galvanized. Heights from 2 m to 7 m in stock. Field load: 12 tons, higher field loads available upon request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly can be arranged upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information, and prices as well as prior sale are subject to change! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top storage technology & used & new heavy-duty racking Description text: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of shelving and steel platform systems immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers - we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete all-round service: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventories including a clean sweep. 2. Commission auction: Conduct auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and clean sweep handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 25 linear meters of Nedcon pallet racking New item, see pictures! A top racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG, with its headquarters in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Load capacity per beam/level: 3050 kg Negotiable price: € 3,290 net ex warehouse The offer includes: + 10 pcs. pre-assembled frames, depth 110 cm, height 3.5 m + 36 pcs. beams, length 2.7 m, 3050 kg load capacity per level + 72 pcs. safety catches Bwodpfx Agsfi U Aijtjt + 20 pcs. concrete anchors Load capacity signs, documentation, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Field load: 12 tons, higher field loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. The goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. We continuously have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer truckloads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of the client. Our full service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 50 linear meters of Nedcon pallet racking New, see pictures! A top racking system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Beam length 2.7 m, orange Beam load capacity / bay: 3050 kg Negotiable price: €10,950 net ex warehouse Offer includes: + 19 units of frames, pre-assembled, depth 110 cm, height 7 m + 144 units of beams, length 2.7 m, 3050 kg load capacity/bay + 288 units of safety locking devices Bwjdpsfkgq Sofx Agtot + 38 units of concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames blue RAL 5019, infill panels galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available upon request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by arrangement. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers in new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of mezzanine floors & steel structure platforms immediately available • 30–50 semi-trailer truck loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & DISPOSAL For disassembly and clearing orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearing. 2. Commission auction: Conducting auctions on behalf of the client. Our full service with our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you were directed to us through heavy-duty racking or are looking for heavy-duty racking galvanized / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 300 linear meters of Nedcon pallet racking New, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity/bay: 3050 kg Bwedpfofi U Afex Agtet Negotiable price: €50,280.00 net ex warehouse Offer includes: + 108 pcs. pre-assembled frames, depth 110 cm, height 6.5 m + 642 pcs. beams, length 2.7 m, 3050 kg capacity/bay + 1284 pcs. safety locking devices + 216 pcs. concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service approach with our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!