Used Hurlimann H-466 for sale (56,014)

Condition: used, Year of construction: 2021, Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible. Ksdpfx As Aba R Toh Nsnc

Condition: used, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 4,850 mm, total length: 6,460 mm, Gas forklift Linde H 80T/900/396 Drive Gas Year built 2017 Lifting height (mm) 4,850 Lifting weight (kg) 8,000 Ksdpfxoy E Ubmj Ah Nenc

Condition: used, Year of construction: 2020, load capacity: 8,000 kg, lifting height: 5,460 mm, total length: 6,180 mm, · Lastschwerpunkt 900 mm · Gabelträger mit 8 Rollen für hohe Beanspruchung · Doppelpedalsteuerung für Vorwärts- und Rückwärtsfahrt · hydrostatisches Bremsen · Joysticks in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos. · Variable Verstellpumpe für geringeren Energieverbrauch · Linde Engine Protection System (LEPS): Überwachung · Warnung und Leistungsreduzierung beim Über- bzw. Unterschreiten verschiedener Leistungsparameter wie Motorölstand/-druck, Kühlwasserstand/-temperatur, Hydrauliköltemperatur, Luftfilterunterdruck · Hohe Sicherheit und Stabilität durch Linde Torsionsstütze · Hydraulisch gedämpfter und gefederter Komfortsitz mit umfassenden Einstellmöglichkeiten · Luftfilter mit integriertem Zyklonenabscheider · Neu für Evo-Modelle: Automatische Geschwindigkeitsregelung in Kurven · Fahrdynamikeinstellung inkl. Hubleistungsanpassung · Bis zu 10% niedrigerer Kraftstoffverbrauch · Präzise Linde Load Control in Armlehne integriert · Blendfreies Display mit Anzeigen für u.a. Tankinhalt, Uhrzeit, Betriebsstunden, Serviceinfos · Kontrollleuchten im Display für Motoröldruck, -überhitzung, Feststellbremse, akustischer Warnton für Motor- und Hydrauliköltemperatur, Luftfilterverschmutzung und Tankreserve · 12V Steckdose in Kabine · Achslast mit Last vorn/hinten kg 20580/2340 · Achslast ohne Last vorn/hinten kg 7540/7380 · Spurweite vorn 1752 mm · Spurweite hinten 1550 mm · Neigung Hubgerüst/Gabelträger, vor/zurück a/b (°) 5,0/9,0 Kjdpfx Ahoztf Udj Nonc · Sitzhöhe/Standhöhe 1505 (mm) · Kupplungshöhe 844 mm · Fahrgeschwindigkeit mit/ohne Last km/h 23/23 · Hubgeschwindigkeit mit/ohne Last m/s 0,51/0,54 · Senkgeschwindigkeit mit/ohne Last 0,56/0,48 · Zugkraft mit/ohne Last 54000 / 50000 N · Steigfähigkeit mit/ohne Last % 25/34 · Beschleunigungszeit mit/ohne Last s 6,7/5,9 · Betriebsbremse hydrost. · Nenndrehzahl min 2200 · Zylinderzahl/Hubraum cm3 4/4038 · Art der Fahrsteuerung hydrost./stufenl · Arbeitsdruck für Anbaugeräte bar 265 · Ölmenge für Anbaugeräte l/min 70 · Schallpegel am Fahrerohr dB(A) 77

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Kodpfxsvthdfo Ah Nenc

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data - Capacity: approx. 15,000 L/h - Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) - Configuration: Multi-tank system (product tank, vacuum tank, saturator) - Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) - CO₂ content: approx. 6.5 – 7 g/l - Electrical: 380 V, 3-phase - Drive power: approx. 5.5 – 7.5 kW Kjdpfxez I R N Hs Ah Nenc Scope of Delivery  - Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit - Plate heat exchanger | Alfa Laval  - Pump unit | Siemens | With motor - Control system | Kinco | HMI touchscreen - Frequency converter 

Condition: used, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 5,480 mm, total length: 4,000 mm, Diesel forklift Linde H 30D Drive Diesel Kjdpfx Ahjy Uzq Hj Nonc Year built 2023 Lifting height (mm) 5,480 Lifting weight (kg) 3,000

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening Ksdpjutmw Hefx Ah Nsnc - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Knedpfx Ahou Urgbo Njc Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Knjdpfx Ahou Ibuws Noc Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: new, For sale: Lowara vertical pump / New Knodpoz Skzysfx Ah Nec Specifications: - Maximum flow rate: 36000 L/h - 14000 L/h - Maximum head: 39 m - 19 m - Motor power: 4 kW - Rotational speed: 2900 rpm

Condition: excellent (used), Lowara SV vertical pump, 15 kW, 2900 rpm, 39 m³/h. Knedpfoz Skxrex Ah Nsc

Condition: new, For sale: Lowara vertical pump / New Specifications: Knedpfxsz Sk A Ds Ah Njc - Maximum flow rate: 39,000 L/h - 15,000 L/h - Maximum head: 93-38 m - Motor power: 11 kW - Rotational speed: 2900 rpm

Condition: excellent (used), For sale: industrial submersible pump, Kreiselpumpen Dresden GmbH, model RAMBO 100-KDFU-150/13.5-A0-03. The pump is equipped with a 3 kW motor, powered by 380 V. The maximum flow rate is 93.6 m³/h (1560 l/min), and the maximum head is 27 m. Technical data from the nameplate: - Manufacturer: Kreiselpumpen Dresden GmbH - Series: RAMBO - Model: 100-KDFU-150/13.5-A0-03 - Serial number: 94200695 - Motor power: 3 kW - Supply voltage: 380 V - Rated current: 10 A - Maximum flow rate: 93.6 m³/h - Maximum head: 27 m - Maximum fluid temperature: 40°C Kodpfoz Sphtex Ah Nonc - Protection class: IP68 - Pressure rating: PN10 - Unit weight: 43 kg - Year of manufacture: 1994

Condition: excellent (used), functionality: fully functional, For sale: PUMPEX PC 2001 H industrial submersible pump with a 5.8 kW three-phase motor and a flow rate of 70,000 liters per hour (70 m³/h). Robust construction with a lower suction basket, an upper discharge connection with a quick coupling, and a carrying handle. Technical specifications: Manufacturer: PUMPEX AB, Sweden Model: PC 2001 H Motor power: 5.8 kW Flow rate: 70,000 l/h – 70 m³/h Power supply: 400 V, three-phase Rated current: 12 A Rotational speed: 2830 rpm Maximum immersion depth: 20 m Insulation class: F Knsdez Sr T Njpfx Ah Nec Included: pump, power cable, connection module with a power socket, and a discharge connection with a quick coupling. Condition: used, with visible signs of wear, scratches, paint chips, and localized corrosion. Visual condition and accessories are shown in the photos.

Condition: excellent (used), functionality: fully functional, For sale: Hidrostal D0DQ-S01 industrial submersible pump with a 4 kW three-phase motor, control box, float switch, and power cable. Robust construction with a ring-shaped base and a lateral discharge nozzle equipped with an elbow and quick-release coupling. Technical specifications: Motor power: 4 kW Power supply: 380–420 V, three-phase Frequency: 50 Hz Maximum flow rate: 48 l/s, or 172.8 m³/h Maximum head: 13.5 m Performance and head parameters are provided according to the attached specification for model D0DQ-S01. Maximum values do not occur simultaneously; actual flow rate depends on the discharge head and installation resistance. Included: pump with base, control box with buttons, Kodpfsz Sr Awsx Ah Nenc float switch, power cable with power plug, discharge elbow with quick-release coupling. Condition: used, with visible signs of wear, paint scratches, and localized corrosion. The scope of equipment and visual condition are shown in the photos.

Condition: used, Vötsch Temperature testing chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature testing chamber from the manufacturer Vötsch. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress testing. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Device type: Temperature testing chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 5 K/min Temperature change rate, cooling: approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg Knsdpfx Ahjzv S Hfs Nsc ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption at full load with temperature difference Dt = 10 K: 2.2 m3/h temperature difference Dt = 5 K: 4.4 m3/h Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Equipment Touch panel operation Interior made of stainless steel Side openings Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature testing chamber Important note: For the safety of our customers, the following work is carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water. Technical specifications: Brand: ORPU Model: Sonel B 60/2 Maximum flow rate: 80 m³/h – 80,000 l/h Maximum head: 25 m Power: 5.2 kW Power supply: 400 V, three-phase Kedez Syk Aopfx Ah Nsnc Frequency: 50 Hz Manufacturer: Oranienburger Pumpen + Verdichter GmbH Country of origin: Germany The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Knodez S I Hxopfx Ah Noc Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Rated current: 11.8 A Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: good (used), Year of construction: 2020, operating hours: 2,002 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 580 kg, mileage: 2,002 km, - Electric pallet truck - Brand: Still - Year of manufacture: 2020 - 2,002 hours on the meter - Capacity: 2,000 kg as a pallet truck - 800 kg as a stacker - Lifting height up to 800 mm Kodpfxez Szito Ah Njnc - Battery - Includes charger - Automatic filling system Watch the video on YouTube.

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Kodoz S Ikwjpfx Ah Nsnc Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: good (used), Year of construction: 2002, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Kjdpjz S U T Sjfx Ah Nonc Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets * For easy transport

Condition: used, operating hours: 9,935 h, lifting height: 4,360 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, fork width: 1,260 mm, total height: 3,050 mm, total length: 3,100 mm, total width: 1,190 mm, color: red, Year of manufacture: 2015 Empty weight: 6.655 kg Lifting capacity: 5.000 kg Knedpfxozrmfue Ah Nsc - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 394F00438 - Operating hours: 9935 - Lifting capacity: 5000kg - Lifting height: 4354mm - Overhead clearance: 3050mm - Fork length: 1200mm - Maximum fork width: 1260mm - Minimum fork width: 330mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Joystick, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Linde - Transport dimensions: 3100mm x 1190mm x 3050mm (l x w x h) - Transport weight [kg]: 6655kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, functionality: fully functional, mileage: 86 km, power: 110 kW (149.56 HP), first registration: 05/2026, fuel type: diesel, empty load weight: 2,600 kg, overall weight: 3,500 kg, next inspection (TÜV): 09/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 7,130 mm, total width: 2,260 mm, total height: 3,180 mm, loading space length: 4,300 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, soot filter, spoiler, start-stop system, tail-lift, tire pressure monitoring, traction control, truck registration, Vehicle Number: N345143 One-day registration Packages LIGHT & VISION Comfort Automatic climate control Electric windows Cruise control Central locking with remote control Steering wheel adjustment Light sensor Electrically heated mirrors Heat-insulating glass Hill-start assist Tempmatic air conditioning Intelligent speed assist Safety Passenger airbag ESP (electronic stability program) Electronic immobilizer Outside temperature display Lane keeping assist Driver fatigue warning system Emergency call system Emergency braking assist Knjdpfxoz Tf Dqo Ah Nec Active brake assist Crosswind assist Exterior Fog lights Spoiler Cornering lights Vehicle length, type L3 Interior Fabric interior Interior color: Black Cup holders 3 seats Adjustable lumbar support Media Radio Radio with MP3 option Bluetooth connectivity Touchscreen MBUX multimedia system USB socket 5 V Digital extra: Smartphone integration Transmission 6-speed manual transmission ECO Gear Technology ABS Traction control Power steering Voice control Emission class Euro 6e Multi-function steering wheel Particulate filter Green environmental badge Engine start/stop function Payload 910 kg General Serviced according to maintenance schedule Warranty Non-smoker vehicle Pre-installation / equipment prepared for activation Pre-installation for navigation Digital extra: Pre-installation for navigation Other Wooden floor Registered as a truck New MOT/emission test Double passenger seat Stabilizers Reinforced shock absorbers Tie-down eyes/rails Tail lift Long wheelbase CO2 efficiency class (weighted): G Further information Breakdown assistance Storage compartment above the windshield Trailer coupling, for increased towing capacity 3.5 t Registered as N1 Load compartment length - 4300mm Load compartment width - 2200mm Load compartment height - 2300mm Changes, prior sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. Vehicle image shows optional equipment. Visual representations may differ from the delivery status. The description according to the purchase contract is decisive.

Condition: ready for operation (used), Year of construction: 1994, travel distance X-axis: 850 mm, controller manufacturer: HEIDENHAIN, overall weight: 5,700 kg, spindle speed (max.): 4,200 rpm, number of axes: 3, This 3-axis HERMLE UWF 1202 H was manufactured in 1994. It features an automatic tool changer and a robust net weight of 5,700 kg. The machine is equipped with a HEIDENHAIN CNC control and an enclosed linear encoder with a measuring length of 620 mm. If you are looking to get high-quality universal machining capabilities, consider the HERMLE UWF 1202 H machine we have for sale. Contact us for further details. - Operating Voltage: 400 V / 3 ~ 50 Hz - Control Voltage: 24 V DC - Total Nominal Current: 20 A - Total Rating: 29 kVA - Enclosed Linear Encoder Model: HEIDENHAIN LS 406C - Linear Encoder Measuring Length: 620 mm- Tool Changer: Automatic tool changer included and functional - Operational Status: Currently not operational due to X-axis positioning error Knjdpfx Ahe Aay U Ae Noc

Condition: used, Pfeiffer Vacuum Here we offer a vacuum pump. Nominal pumping capacity: max. 94 m³/h Oil volume: D1 1.8L Type: UNO 90 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) Knsdpfozdqqfjx Ah Nec We will be happy to answer any further questions you may have over the phone.