Used Daewoo Mega 400-V for sale (57)

Condition: good (used), functionality: fully functional, machine/vehicle number: E9-00274, For sale is a Daewoo G50SC-2 forklift with a gas-powered engine and side shifter. The forklift is in perfect working order. The last inspection was carried out in 2023. Technical data and equipment: • Manufacturer: Daewoo • Model: G50SC-2 • Engine: Gas / LPG • Rated load capacity: 5,000 kg • Load capacity with mounted attachment according to the nameplate: 4,550 kg at a 500 mm load center and 3,650 mm lifting height • Side shifter • Operator protection roof with weather protection • Windshield with windshield wiper • Work lights • Mount for two gas cylinders The forklift is in used condition with typical signs of wear and tear. Suitable for material handling, warehousing, and loading/unloading operations. Inspection and demonstration are possible by arrangement. Ksdez Apf Sepfx Alfodt Location: Quickborn (25451) near Hamburg, close to the Quickborn highway exit. If you are interested or have any questions, please do not hesitate to contact me.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER TAILSTOCK CHIP CONVEYOR Kdsdpfsygidkjx Alfst

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Kodpfsvcf Rnjx Alfodt Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Kedpfx Ajidabkelfodt Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS Kodpfx Asyuqacslfodt CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Kdedpfex Ad Nlex Alfst Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, DAEWOO ACE-H500 For sale Daewoo ACE-H500 horizontal machining center, a heavy-duty and reliable HMC designed for high-precision and high-productivity machining. The ACE-H500 is well known for its rigid construction, powerful spindle, and long service life, making it an excellent choice for subcontracting and industrial production. Kodpfx Asx Htawolfsdt Daewoo (now DN Solutions) machines are highly regarded worldwide for durability, accuracy, and ease of maintenance. Technical specifications: Pallet size: 500 × 500 mm Number of pallets: 6 Max. workpiece size. Ø800 × 1000 mm Max. workpiece weight. 800 kg X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Spindle taper: BT50 Max. spindle speed: 6000 rpm Spindle motor power: 12 kW Tool magazine capacity: 120 tools Tool change type: Automatic CNC control: FANUC Rapid traverse (X/Y/Z): 24 m/min Machine dimensions (L × W × H): approx. 4.5 × 2.8 × 3.0 m Machine weight: approx. 12,000 kg General: Rigid box-type construction for stable heavy cutting High torque spindle suitable for steel and cast iron Excellent accuracy and repeatability Ideal for series production and flexible manufacturing Proven platform with strong spare parts availability Test run possible by appointment. Ask for the price delivered. Verify the details with the seller.

Condition: used, Daewoo Puma 12S-3A CNC Turning Centre Year: 1996 Fanuc Series O-T CNC Control C-Axis Spindle Live Tooling 12 Station Servo Turret Hydraulic Chuck Swing Over Bed: 570 mm Maximum Turning Diameter: 430 mm Maximum Turning Length: 770 mm Serial Number 3P100044 90 mm Bar Capacity 91 mm Spindle Bore A2-8 Spindle Nose Spindle Speeds: 25–3,000 rpm 18.5/22 kW AC Spindle Motor X Axis Travel: 260 mm Kodpfx Alszrt Dwsfodt Z Axis Travel: 800 mm Rapid Traverse: X 20 m/min, Z 24 m/min Automatic Lubrication Coolant System Swarf Conveyor Fully Enclosed Splash Guarding

Condition: used, Year of construction: 1999, lifting height: 4,240 mm, free lift: 730 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, fork width: 1,120 mm, total height: 2,100 mm, total length: 2,600 mm, total width: 1,180 mm, color: yellow, Empty weight: 4.433 kg Lifting capacity: 2.500 kg - Year: 1999 - Documentation available: Yes - CE marking present: Yes Ksdpozhv Epjfx Alfedt - CE certificate present: No - Serial number: 90-00945 - Lifting capacity: 2500kg - Lifting height: 4240mm - Overhead clearance: 1980mm - Free lift: 730mm - Fork length: 1200mm - Maximum fork width: 1120mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Free-lift, Joystick - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2600mm x 1180mm x 2100mm (l x w x h) - Transport weight [kg]: 4433kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 650 mm, turning diameter: 355 mm, spindle speed (max.): 3,500 rpm, spindle nose: A2-8, Equipment: documentation/manual, Machine with tailstock. CNC FANUC 21T Year 1998 Kdjdpfx Ajzp Hh Delfet Capacity Turning Ø: 355 mm Turning length: 650 mm Spindle: Spindle nose: A2-8 ASA Spindle speed: 3500 rpm Motor power: 18.5 Kw Turret: Tool Stations: 10 Tailstock: Cone: 5 CM

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Ksdpfxoxxlifj Alfjdt Tool taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement - Full overhaul of telescopic covers on X/Y/Z axes

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Travel: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 CE Weight: 7,500 kg Kedpfxoypakme Alfsdt Complete with all documentation

Condition: good (used), Year of construction: 2001, CNC lathe Daewoo Puma 230 SA – Year of manufacture 2001 Controlled axes: 3 (X – Z – B) Ksdpfx Aezr Hfnelfsdt Numerical control: Fanuc Series 18-T Max. turning diameter over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mounting: ASA A2-6" Chuck: 2 x collet chucks Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions Live tooling Chip conveyor: included Bar loader, 3-meter bar capacity Machine weight: 4,240 kg

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details. Kodpfozrw Nkex Alfjdt • Tool magazine capacity: 24 positions

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, controller manufacturer: FANUC, controller model: 21-M, overall weight: 7,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1,200 x 500 mm Kdodjzmgiispfx Alfot Additional equipment • Chip conveyor Technical Specification Taper Size ISO 40

Condition: used, Technical details: rated capacity: 8,1 kVA Number of working hours: 0 h output: max. 400 V = 8,1 kVA type of fuel: Diesel voltage: 400 V / 23 V V output: max. 8,1 kVA weight of the machine ca.: 0,165 t dimensions L x W x H: ca. 0,85 x 0,53 x 0,77 (o.Karton) m transport dimensions LxWxH: 0,9 x 0,55 x 0,80 m Floor standing machine with 4x wheels, 2x steerable and braked power: at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Voltage 400V / 230V Diesel engine: 498 cc displacement Tank capacity 15 liters Ksdpou Nvcxofx Alfjdt Battery 12V voltage with power 36 Ah Equipment: 3x connection socket ( 1x 400V / 16A and 1x 230V / 32A both three-pole and 1x Schuko socket 230V / 16A) Accessories see photo Offers only to the professional user. *

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Kedpfxjxrgglj Alfsdt

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Swing diameter over cross-slide: 450 mm Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Kdjdpfx Alsyx A Rvsfet Weight: 6700 kg INCLUDES Chip conveyor

Condition: used, Year of construction: 2025, fuel type: diesel, power: 5 kW (6.80 HP), total length: 800 mm, total width: 600 mm, total height: 600 mm, Generator capacity: 8,1 kVA Current frequency: 50 Hz Kdedpfeyay Tisx Alfet Voltage: 230/400

Condition: used, Loading utility 500 Liter weight 0,3 t dimensions 1750 x 730 x 1080 m Kjdpfxoyrhvce Alfedt Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Kedpfsx N A N Hex Alfodt Various tool holders & collets 3-jaw chuck

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Machine Benefits Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Extra Information Kodpfxsyar Eqs Alfjdt Machine still under power

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, controller manufacturer: FANUC, controller model: 18 T, number of axes: 2, Horizontal turning machine manufactured in 2000. This DAEWOO Puma 350 features a reliable Fanuc 18T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 machine we have for sale. Contact us for further details. • Condition: Good / Fully operational • Control System: Fanuc 18T Technical Specification Kjdpfszb E Twsx Alfjdt Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 210 mm, travel distance Z-axis: 400 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This DAEWOO EcoTurn 200 features a reliable Fanuc 18 T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO EcoTurn 200 machine we have for sale. Contact us for further details. - Manufacturer: Daewoo- Model: EcoTurn 200- Year of Manufacture: 1999- Condition: Good / Fully functional- Control: Fanuc 18 T Technical Specification Ksdpfx Alezb Ewijfsdt Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, table load: 800 kg, spindle speed (max.): 1,100 rpm, number of axes: 3, This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details. Kdsdpfx Ajzhb I Nolfst • CE Marked: Yes • Part Counter: 2,430 • Cycle Time: 0 h 3 min 14 s • Current Active Tool: T0006 • Table Type: T-Slotted • Table Size: Typically 1200 mm × 500 mm