Used Gimaco 200 Fwt for sale (39,465)

Year of construction: 1992, condition: ready for operation (used), coolant capacity 50 - 250 m3l/h Headroom 5 - 12 m operating pressure max 1,2 bar voltage 380 V / 50 Hz motor type 132 M 4 Iiedpfx Afeui T Abo Sjk motor speed 1500 U/min Motor Capacity 7,5 kW weight 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Iiedpfx Asgpxc Ssf Ssk Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CMB SFR 4500×200 Frame Press Working length 4500mm Working width 200mm Working height 1200mm Number of vertical clamps 9 Number of front clamps 4 Working pressure 250bar Iiodpfx Asv Scz Ajf Ssk Hydraulic pump motor 1.5kw Weight about 2500kg

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but not Hammelmann, Woma, Kamat Perm. operating overpressure: 50-200 bar Recommended delivery rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10,9 kg with MADER PEU-063-0010-I-P-M Iisdpfx Afsd D Aghe Sjk Year of construction: 2012 (unused) Demineralized water: Suitable for operation with demineralized water. Electro-pneumatic control: Accepts the switching command and the pressure setting of the valve. Gap seal: Serves for exact reproducibility of the response pressure. Further technical data see data sheet. Keeps the operating pressure constant regardless of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behaviour with rapid flow changes. Special features: Very high response reproducibility, high response dynamics, cone can be used on both sides.

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t Iijdpfx Aelp Uz Rsf Ssk table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Size: 700 x 500 mm Speed: 4.000 c/h Iodpodyk Rpefx Af Seik Equipment: • hand fed station • 15 stations

Condition: ready for operation (used), Chip Conveyor, Knoll 320 s-1/200, Used Machine Manufacturer: Knoll Type: 320 s-1/200 Year: 2015 Overall dimensions: 6200 x 1310 x 1610 mm Belt dimensions: 500 x 1400 x 4700 mm Lamella spacing: 315 mm Iijdpfxowmmlts Af Sek

Condition: excellent (used), Year of construction: 2018, QUICKWOOD CD5/200 brushing machine Iiodpfxow Ihwle Af Ssk

Year of construction: 1978, condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Iijdpfx Aod Nzfcef Sok

Condition: excellent (used), functionality: fully functional, Passing grinder OLIMPIA 200 with extraction Specifications: - condition - used - manufacturer - OLIMPIA - model - 200 - main motor 3.0 kW - max working width 200 mm - symmetrical tops with dimensions of 24 x 55 cm each - mechanical belt tensioning and oscillation - 1 sanding unit with viscera - built-in sawdust extraction Isdpfxsvgm T So Af Sjik - both tops adjustable - adjustable culageway at an angle of 12 x 60 cm - extraction stub - fi 80 mm - weight - about 250 kg - overall dimensions - 125 x 75 x 95 cm ( W x L x H ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site. - the price given in the auction does not include VAT

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Iisdeq H Sqdopfx Af Ssk Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Ijdpfx Afsx A Hfvs Soik Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Iisdjl Ayc Tspfx Af Sek Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION

Condition: new, Table size: 420 x 450 mm Ijdpsc Snvfsfx Af Ssik Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in Iiedpfx Afjw N S E Aj Sok high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, For right-sided edgebander To suit machine length 6m-7m Ideal for Homag Edgeteq S-300 (KDF1440/1450) or Homag Edgeteq S-380 (KDF1650) Workpiece length: 300 - 2,500 mm Workpiece width: 50 - 1,450 mm 4-sided processing* min. workpiece length: 300 x 300 mm 4-sided processing* max. workpiece length: 1,450 x 1,450 mm Iodpfxex Igbdj Af Ssik Workpiece thickness: 8 - 60 mm Workpiece weight max.: 50 kg Mass per unit area: 25 kg/m² Working height: 835 - 950 mm Feed speed: 8 - 25 m/min

Condition: good (used), Laska KCU200 from meat free factory. Programmable model with loader for 200 litre tote bins. Iodpfx Afjx Ilh Ao Seik

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Isdpehwi U Tofx Af Seik Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: ready for operation (used), controller manufacturer: Delem DA66W Graphic, throat depth: 410 mm, installation height: 530 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, total length: 3,800 mm, total width: 1,850 mm, total height: 2,800 mm, power: 19 kW (25.83 HP), travel distance Z-axis: 260 mm, empty load weight: 10,000 kg, passage width: 2,550 mm, table width: 60 mm, 8 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 / V laser security Iiodpjx Immmsfx Af Sjk 2 plate supports Capacity: 200 ton x 3100 mm Backgauge: CNC Locking speed: 150 mm/sec

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station Iedob A Igvjpfx Af Soik -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Iodpfeul Efmsx Af Soik Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Ijdpfx Aoxfhvzjf Soik Operating Units: 4 nr

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Iedpjb A Ig Ajfx Af Seik -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank Iedpfxeb A I H Ie Af Soik -Hydraulic filter -Weight: 230 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Iiedpfx Ajb A I Husf Ssk -Input: 380 V 3 kW -Output: 130 V 200 Hz -Power output: 4 kVA -for edgebanders, edgebanding machines -Weight: 125 kg