Used Tos for sale (8,179)

Condition: used, Year of construction: 1980, Functionality: fully functional, turning height: 1,425 mm, turning diameter: 1,500 mm, total height: 4,900 mm, total width: 3,800 mm, total length: 3,250 mm, rotational speed (min.): 2,400 rpm, table load: 2,500 kg, table diameter: 1,250 mm, overall weight: 25,000 kg, TOS SKI 12 NC vertical lathe Can be viewed in operation. Videos are available and can be sent via WhatsApp. Belq Svsv Rgkljtajwl Support is available for dismantling and removal. This machine is sold exclusively within the EU.

Condition: excellent (used), 1 used heavy-duty manual folding machine / folding machine in very good condition Make: TOS Strojarne / UNICORN, Origin Czech Republic Model: XK 2000/2A Technical data: max. bending length 2050 mm max. thickness of bent sheet 2 mm max. bend for ruler pointed 135° max. stroke of the work table 100 mm max. stroke of the upper beam 100 mm Stroke of lower beam 100 mm Dimensions L x W x H 3200 x 720 x 1300 mm Weight of the machine 1650 kg Accessories / special features: - Pointed rail 45° - Bending rail - Stop with degree adjustment Siegfried Volz Machine Tools Bolq Svouu Sy Netaowl Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Bweleu Tvdbeq Svtajl Only available as a set

Condition: used, Year of construction: 1987, x-travel 600 mm y-travel 400 mm z-travel 400 mm spindle taper ISO 40 quill stroke 100 mm spindle turning speed range 40 - 2000 U/min voltage 380 V Table dimensions 800 x 400 mm weight 1,9 t total power requirement 3,0 kW dimensions of the machine ca. 1,90 x 1,80 x 1,90 m Bwjlq Ssiclmxevtajl

Condition: new, Year of construction: 2025, center height: 160,200,250 mm, workpiece weight (max.): 750 kg, grinding length: 100,020,003,000 mm, grinding wheel diameter: 500,600 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill stroke: 50 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 1,400 rpm, warranty duration: 24 months, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 Bwolopy A Iusq Svtajl - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: ready for operation (used), controller manufacturer: Heidenhain, total length: 7,045 mm, total height: 4,495 mm, net weight: 32,000 kg, total depth: 5,910 mm, Dwarsbeweging van de tafel (X): 2000 mm Verticale beweging van de kop (Y): 1250 mm Beweging van de spindel (B): 800 mm Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1250 mm Bwolq Svjv Tak Djtajl Travel Z-axe: 2000 mm Dimensions clamping space- table: 1800 x 2200 mm Power on spindle: 37 kW Admission in millinghead (ISO): ISO 50 (dia 130 mm) Max quill travel Z': 800 mm Max speedrange: 10 > 1800 rpm

Year of construction: 1960, Condition: used, Empty weight: 5.500 kg Dimensions (LxBxH): 245 x 265 x 270 cm - Year: 1960 Bwslq Svjwczr Hetaol - Documentation available: No - Serial number: 33460 - Control: Conventional - Motor power: 15.0kW - Transport dimensions: 2450mm x 2650mm x 2700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm Bwolq Svtov Ank Deajl centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V main drive 5,8 KVA With chuck, Multifix toolholder and digital readout.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 20,000 kg, turning diameter over cross slide: 2,000 mm, turning diameter: 2,600 mm, rotational speed (max.): 250 rpm, spindle speed (max.): 3,000 rpm, table load: 20,000 kg, table diameter: 2,000 mm, Equipment: rotational speed infinitely variable, TOS SKIQ 20 CNC Vertical Borer. 2009. CNC Vertical Borer with Live Tools Drilling and Milling Bwjlq Sowc R Uwovtasl Siemens Sinumerik 840D, ATC 15. With Tools and Renishaw Workpiece Measuring. Table diameter 2.000 mm Max. Swing up to a height of 580 mm 2.600 mm Max. Swing 2.300 mm Turning Heigth 2.200 mm Table speeds, stepless 2,5-250 rpm Table load capacity 20.000 kg Table motor 80 kW Ram 180 x 200 mm, stroke 1.000 mm Live spindle speed 4 - 3.000 rpm Live spindle motor 28 kW

Condition: ready for operation (used), Year of construction: 1999, 4-Axis CNC Boring Machine Brand: TOS Type: WHN 110 CNC Year: 1999 CN: HEIDENHAIN TNC 430 Specifications: Travel: X cross (table) 2,000 mm Y vertical (slide) 1,600 mm Z (post) 1,250 mm Spindle width 500 mm Spindle diameter 110 mm Spindle taper ISO 50 Max. spindle power 37 kW Max. spindle speed 2,500 rpm Working feeds 5 m/min Rapid feeds 10 m/min Table dimensions 1,600 x 1,400 mm B axis 360,000 positions Equipped with: Bwjlewdhwfeq Svtasl TOS universal milling head Dual chip conveyor

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Bolq Seu U Ewgsvtaowl It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, total length: 8,400 mm, total width: 3,550 mm, total height: 2,100 mm, net weight: 10,000 kg, swing diameter over cross slide: 5,000 mm, additional equipment features: yes, Heidenhain-besturing Spaantransportband Beschermhoezen Extra stabiel Swing over bed: 1250 mm Swing over cross-slide: 930 mm Bolqjv St Erj Svtaewl Dia of spindle bore: 128 mm Power on the spindle: 41 kW Number of speeds: 4 > 630 rpm Total power needed: 67 kVa Chuck: dia 1000 mm

Condition: excellent (used), Functionality: fully functional, total width: 1,700 mm, total height: 1,800 mm, total length: 2,200 mm, planing width: 500 mm, height adjustment type: electric, overall weight: 2,000 kg, planing height: 200 mm, chip removal: 160 mm, number of blades: 4, working height: 200 mm, number of planer blades: 3, worktable width: 500 mm, pass-through height: 200 mm, extraction connection diameter: 160 mm, number of feed rollers: 3, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: Bwelqowfihuo Svtajl -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: excellent (used), Machine in very good condition including accessories. Clamping table area mm 250 x 1130 Working stroke: longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Bwelqswaib Dj Svtajl Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Machine weight kg 1760

Year of construction: 1989, Condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€ Belqjd R Ri Ue Svtaowl

Condition: used, TOS Sui 50-1500 lathe, No. 150150900039, center distance approx. 1,500 mm, weight 2,820 kg, with various lathe chucks Bslq Svtewczd Neaewl

Year of construction: 1990, Condition: good (used), Vat not included in price. Bslqod Hgf Ro Svtaswl

Condition: ready for operation (used), chuck outer diameter: 3,200 mm, total height: 7,155 mm, controller model: Siemens 840D, net weight: 65,000 kg, Type: SKD 32B Siemens 840D CNC-besturing 2017 Tafeldiameter: 3200 mm Maximale zwenking: 3500 mm Maximale belasting op tafel: 50 ton Hydrostatische tafel!! Vermogen op tafel: 120 kW Torsiekracht: 132 Kn 2 variabele snelheden versnellingsbak: ,8 80 rpm Verticale verplaatsing van de dwarsbalk: 2100 mm Maximale werkstukhoogte: 2550 mm 2 gereedschapskoppen op dwarsbalk CNC gestuurd - Horizontale beweging van gereedschapskop nr. 1: 1400mm - verticale beweging van gereedschapskop nr. 1: 1500mm - Horizontale beweging van gereedschapskop nr. 2: 1980mm - verticale beweging van gereedschapskop nr. 2: 1350 mm - draaihoek van gereedschapskop: -/+ 30° Max turningdia -- passage: 3500 mm Power on the spindle: 120 kW Number of speeds: 1 > rpm / > 80 rpm Power needed: 195 kVa Bwelq Svov Rwh Iotasl Long: 10045 mm Wide: 8120 mm

Condition: ready for operation (used), Hobelbreite 500 mm Max. Hobelhöhe 200 mm Untere Hobelwelle 4 Messer 5.5 kW Motor Obere Hobelwelle 7.5 kW Durchmesser der rechten Spindel 40 mm Motor 4 kW Linker Spindeldurchmesser 40 mm Motor 4 kW Elektrische Höhenverstellung Bwoljwc T Dzoq Svtaol

Condition: used, Clamping plate diameter: 800 mm Clamping plate speed: 3-304 /min. - increased: 4.5 - 400 /min. Boljwdmxboq Svtaowl - reduced: 2.5 - 225 /min. Max. turning diameter: 950 mm Max. slide stroke: 750 mm Max. turning diameter with side slide: 800 mm Max. slide stroke: 500 mm Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Electric motor for plate drive: 3-30 kW Machine weight: 10000 kg Hydraulic 3-jaw chuck

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 3000 Y-Axis Movement 1000 Z-Axis Movement 1400 Additional Equipment Additional Documentation: User manual available Belqjv U Eu Ro Svtaowl This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, turning diameter over cross slide: 940 mm, spindle bore: 180 mm, turning diameter: 1,250 mm, turning length: 6,000 mm, quill diameter: 200 mm, spindle speed (max.): 355 rpm, overall weight: 10,500 kg, MACHINE CAPACITY: Maximum diameter on the bed: mm 1.250 Maximum diameter on the carriage: mm 940 Height of the centers: mm 625 Width and height of the bed: mm 800 x 630 Maximum weight of the piece between the centers: kg 5.000 Maximum weight of the piece between the steady rest: kg 6.000 Distance between the centers: mm 6,000 Maximum torque at the spindle: kpcm 125.000 Maximum cutting force: kp 5.000 SPINDLE: Front side shaft diameter: mm 180 Boring diameter: mm 102 Spindle taper 1:10: mm 120 Front end of the spindle CSN 20 1010: mm 290 Spindle speed in 24 steps: rpm 1.8 – 355 CARRIAGE: Longitudinal feeds at all spindle speeds in 54 steps: mm/rev 0.8 - 7 Longitudinal feeds with spindle idler shaft in 54 steps: mm/rev 0.66 - 56 Cross feeds: mm/rev 0.33 of the longitudinal. Bwelq Sswc Aupsvtasl Longitudinal rapid movement: mm/min 3,600 Useful stroke of the cross carriage: mm 530 Useful stroke of the tool holder slide: mm 340 Max. tool section for the tool holder: mm 60 x 60 THREADS: a. For rack gear 27 metric threads at a pitch of: mm 0.125 – 56 b. For main screw 40 metric threads at a pitch of: mm 1 – 112 42 Whitworth threads, number of threads per inch: ¼ - 28 32 module threads: module 0.5 – 28 36 Diametral Pitch D.P. 56 – 1 36 Circular Pitch C.P. 1/16 – 3 ½ MAIN SCREW: Diameter per pitch: mm TR 65 x 12 TAILSTOCK: Diameter of the tailstock hole: mm 150 Diameter of the tailstock quill: mod. 200 Diameter of the hole cone: mm 100/1:20 Transverse movement of the tailstock: mm +/- 10 Max. axial load of the tailstock: kp 5,000 Machine weight: kg 10,500 Complete with: - Fixed steady rest - Instruction manuals

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 62876, TOS BU28 Center distance: 1000 mm Bolewdm Ebjq Svtaswl With accessories, stones

Condition: excellent (used), A well-maintained universal milling machine, TOS, Type: FGS 50/63, Machine No.: 12 869, Year of Manufacture: 1987 X: 1400 mm Y: 630 mm Z: 500 mm Clamping Area: 1800 x 500 mm Belqjwb U Ewo Svtaowl Adapter: SK 50 Speed: 35.5-2240 rpm Power: 15 kW Total Power: 23 kW with digital display and SK 50 adaptors

Condition: good (used), Year of construction: 1972, Table size 2,000 x 450 mm X-axis 1,250 mm Y - axis 400 mm Z - axis 400 mm Spindle speed 18 - 1,400 rpm Spindle run-up ISO 50 Belq Sstqmhmovtaewl Incl. coolant device Incl. counter bearing