Used Tos Sn 500 S for sale (76,026)

Condition: good (used), Used lathe from TOS In excellent condition, previously used in a one-man operation. Type: SN 400 S 1000 Swinging diameter over bed: 410 mm Fpsdpfxs Aiqk Ro Actjp Swinging diameter over cross slide: 225 mm Swinging diameter in the bed gap: 600 mm Spindle bore: 77 mm 2-axis digital readout from Sony Includes 3 + 4 chucks Includes 2 tool holders

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Fjdpfjz Tdcfsx Actopp

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Fpsdpjz Ii Tdjfx Actep Universal milling head - manual

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 5000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA Fedpfxoygxy Uj Actopp weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, center width: 2,000 mm, rotational speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Fsdpfx Aco Af Hdustjpp TECHNICAL DETAILS Swinging diameter over bed: 1,050 mm Distance between centers: 2,000 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Workpiece weight: max. 5,000 kg MACHINE DETAILS Control: Conventional Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,700 mm Machine weight: 8,000 kg EQUIPMENT Four-jaw chuck Fixed steady rest

Condition: good (used), Used TOS lathe Fpodpfxo Aiqtno Actjp In top condition, used in a one-man operation. Type: SN 40B 50B Max. turning diameter above the bed: 400 mm Max. turning length: 1000 mm Spindle bore: 52 mm 2-axis digital readout Includes 3-jaw and 4-jaw chuck Includes tool rest

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Fedpfx Acjy In A Netepp

Condition: good (used), Used lathe from TOS Fedpfxj Aiqvfe Actjpp Type: SN 55B Capacity: 550 x 2000 mm Spindle bore: 80 mm Includes 3-jaw and 4-jaw chuck Includes tool holder

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Fsdpfey In A Ajx Actjpp Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Fpjdozf Nd Hepfx Actsp Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U Fpsdpfxsxp Rzbs Actsp feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Acu Rite digital readout Machine lamp Coolant tank Longitudinal stop Fpsdpovq Ibxefx Actop Rear chip guard Chuck guard

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Fpsdpfey In Dgex Actsp Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Fpodpfx Aoylpqhjctep Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm Fjdpfxsy Hxq Us Actspp weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m Fpsdpfxexhd Tuj Actjp ➤ Pressure regulator

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Fpsdpfx Acjwu Du Iotop Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Width of bed 340 mm Fpodpfxjyt Iaqj Actjp Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Fodpfjmk E D Iex Actjpp Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Fpjdpfs Ahrw Ujx Actjp terms of payment: 100% prior to delivery

Year of construction: 2013, condition: excellent (used), - ATEX: II G / 2G c IIA – T2 - Year of manufacture: 2013 Fpedpe Abbnajfx Actsp - Motor: 2.5 kW / 400 V, 50 Hz, 2875 rpm - High-pressure fan: 5,077 Pa / 3,300 Pa - Volume flow rate (m³/h): 103 - Very few operating hours - In perfect condition

Condition: used, functionality: fully functional, KAMI, Type DKM 500S, in very good, operational condition. Year of manufacture: 2015 Fpodpfx Acs Ah Rwuetop 1,000 mm max. turning length 500 mm Ø turning diameter Digital display Steady rest Sturdy tailstock 3-jaw chuck 85 mm Ø spindle bore Approx. 1,300 kg weight Dimensions: L 3500 x W 1050 x H 1550 mm

Condition: as good as new (ex-display), FRONIUS TPS 5000 Fodpfx Aswbknboctepp ✅ Scope of supply: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder VR 4000 ➤ Fronius intermediate hose package, standard, from 1.5 m ➤ Fronius undercarriage ➤ Fronius hose package ➤ Ground cable, 3-4 m ➤ Pressure regulator This device can be used to weld almost all materials, including aluminum, steel, and V2A. It features wire feed programs and is also suitable for MIG brazing (Cusi), which is often used in the sheet metal industry. Additional options and uses: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, with which you can create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE WITH VAT INVOICE Inspection is possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For clarification, we buy like-new used devices, disassemble them, check everything, replace worn parts if necessary, and only then, after a successful test weld, is it approved for sale. "All" devices are clean and have neither burn marks on the displays nor countless burn marks or dents on the device! You are buying from us an item that is also worth seeing and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for an intra-community supply within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal collection. ►►►Is insured shipping possible? Yes, we will gladly send you the purchased set, well-packed and insured, on a Euro pallet. ►►►Is there a warranty? We sell the machines for a third of the new price and unfortunately do not have any room to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know these devices and do not sell anything that we are not familiar with. All prices are starting prices; you can configure the devices with us. Robot device or hand-held device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp devices in stock. CMT version available as a hand-held or robot device. It is best to call us; we will discuss your application and you will receive an initial price estimate.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Fjdpozphf Defx Actepp Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Fjdpjzc Rfbsfx Actspp