Clamping plates with T-slots

5000x2000x400

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ljdpfx Ajyqvwledcoru If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, turning diameter over bed 1440 mm turning diameter over slide rest 960 mm turning length 8200 mm faceplate 1250 mm turning diameter in the gap 1460 mm length of gap 460 mm turning speeds 1,8-400 U/min workpiece weight 22000 kg total power requirement 46 kW Machine overhauled 2004 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lodpsyutq Rjfx Adcsru About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Ljdpozff A Ejfx Adcsru Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm Ljdpfxsu N Atwo Adcjru without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Lrodpfx Adjzcm Rmocou Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Ledpfoxyk Tlex Adcjru

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm The tech. Data are manufacturer or operator information and therefore non- Lrodpfjyt R Anox Adcou binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Lrodjzmp Axopfx Adcju

Condition: used, spindle diameter 125 mm Lrodpfoyuql Eox Adcju spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 1,650 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, faceplate diameter: 2,000 mm, SMTCL (Shenyang No.1 Machine Tool Works) CW61200 universal horizontal center lathe, year of construction 2005, made in China. The bed ways are in good condition and the machine is in active production use. Technical data: - Faceplate / chuck diameter: 2,000 mm - Turning diameter over bed: 2,000 mm - Turning diameter over cross slide: 1,650 mm - Turning length / machining capacity: 8,000 mm (8 m) Lodpsz Anxqjfx Adceru Equipment: - 2 x standard steady rest - 1 x heavy-duty steady rest - Digital readout (DRO), retrofitted by us In good working order and ready for immediate delivery.