Internal broaching machine

Karl Klink RSI 20/DT

Year of construction: 1960, Condition: refurbished (used), Machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 weight: 3,2 to broaching force: 6.000kg With switch plate ( 2 stations ) Bvvzb0Xhrr Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, Condition: refurbished (used), Machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Bvvzfnflb7 Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1998, Condition: used, Ref. -No.: 10444 Manufacturer: KARL KLINK Type: RSI 16 / D Year of construction: 1998 Type of control: n/a Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 1782 Max traction: 16 t Machine weight: 4,5 t Machine width: 2200 mm Machine Height: 4200 mm Machine depth: 1550 mm Clearance power: 16 kN Connected Load: 35 A Operating voltage: 380 V Usul9Td3N2 frequency: 50 Hz Clearance length: 1250 mm Clearance points: 3 Distance between the clearing points: 380 mm Mounting diameter of the pulling heads: 110 mm cutting speed: 1 - 7 m / min Return speed: 7 - 25 m / min

Year of construction: 1962, Condition: good (used), Machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse. Dpdkjx

Year of construction: 1998, Condition: ready for operation (used), Functionality: fully functional, Machine/vehicle number: 1782, No minimum price - guaranteed sale after the end of the auction! TECHNICAL DETAILS Tractive force: 16 t Clearing force: 16 kN Broaching length: 1250 mm Clearing points: 3 Distance between the broaching points: 380 mm Mounting diameter of the pulling heads: 110 mm Cutting speed: 1 - 7 m/min Return speed: 7 - 25 m/min MACHINE DETAILS Machine weight: 4.5 t Machine width: 2200 mm Machine height: 4200 mm Machine depth: 1550 mm Connected load: 35 A Operating voltage: 380 V Frequency: 50 Hz Beiyw9A

Year of construction: 1965, Condition: used, Machine/vehicle number: 2112, Color: green Force: 2,5 to Stroke: 1000mm Weight: 1,2 to 3 KW Area required: appr. 140 x 130 cm K9H7R

Year of construction: 1964, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Bnq02Nqxkw Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Year of construction: 1998, Condition: ready for operation (used), Functionality: fully functional, Machine/vehicle number: 1782, No minimum price - guaranteed sale after the end of the auction! TECHNICAL DETAILS Tractive force: 16 t Clearing force: 16 kN Broaching length: 1250 mm Clearing points: 3 Distance between the broaching points: 380 mm Mounting diameter of the pulling heads: 110 mm Cutting speed: 1 - 7 m/min Return speed: 7 - 25 m/min Dprjbv MACHINE DETAILS Machine weight: 4.5 t Machine width: 2200 mm Machine height: 4200 mm Machine depth: 1550 mm Connected load: 35 A Operating voltage: 380 V Frequency: 50 Hz

Year of construction: 1964, Condition: refurbished (used), Machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to Corzljx broaching force: 8.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1965, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 2549, General / technical data: R0Hx0Bwvzv used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 1990, Condition: used, Machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 Cgdkkusyc8 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Year of construction: 1990, Condition: used, max.: tractive force 25.000 KG Wi8Evhjps max.: tool length 3520 mm max.: cutting speed 9,6 m/min passage width 520 mm The machine has machined connecting rods and con rod caps. The machine is designed for mass production (output 400 pieces/hour).

Year of construction: 1956, Condition: used, Machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: Bw9Kpbonk The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Condition: like new (used), amount 43 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Gxcyvae Quantity= 52 pcs. Unit price per piece = 140,00€ / per piece Complete purchase with cabinet = 120,00€ / per piece

Year of construction: 1961, Condition: used, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 weight: approx. 6.500kg Eavaoimjo tractive force: 10t clearing speeds: 1 - 11m/min return speeds: 7 - 25m/min maximum stroke: per machine unit 1250mm clamping area: 500 x 500mm passage width: 380mm power supply: 380 Volt / 50 Hz Remark: The machine is under power in our warehouse and can be inspected.

Condition: like new (used), amount 63 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Quantity= 119 pcs. Unit price per piece = 140,00€ / per piece Fzjcx8K Complete purchase with cabinet = 120,00€ / per piece

Year of construction: 1978, Condition: excellent (used), Machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min Bcqdv0Ji maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: good (used), amount 2 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, - Type: 5 N9x2,3+0,1, Rlg 20-60m/m - WN160.03.5.15 Ufpcffsrcd - Item no.: 4.95.SS42 0951318 - Item no.: 2.95.SS42 0942173 Length: 1060 mm Width: 7 mm Height: 12 mm Year of manufacture: unknown

Year of construction: 1951, Condition: good (used), Machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 B8Qojlg8M built in: 1951 stroke 1500mm pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: good (used), amount 1 STK Broaching tool, broach, special tool, grooving tool, grooving machine, Gpbizk grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, - Type: 5 H9x2,3+0,1, Rlg 12-30m/m - - Item no: Length: 900 mm Width: 7 mm Height: 7 mm Year of manufacture: unknown

Year of construction: 1963, Condition: good (used), Machine/vehicle number: 1954, Karl Klink - internal broaching machine machine type: internal vertical hydraulic broaching machine manufacturer: Karl Klink type: RIS 25 x 1500 built in: 1963 stroke: 1500mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Dvg8Wzz

Condition: good (used), amount 2 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Ufo3Slrcah - Type: 5 H9x2,3+0,1, Rlg 10-16m/m - Stanl. 834 134 WR1/136/138 - Item no.: 2.99.SS42 0981894 Length: 1000 mm Width: 7 mm Height: 7 mm Year of manufacture: unknown

Year of construction: 1962, Condition: used, Machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) 3Rh3Svi cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Condition: good (used), amount 2 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, - Type: 6 P9x2,8+0,1, Rlg 16-40m/m - Stanl. 836803 WR1 - Item no.: 2.00.SS42 0992114 Length: 1060 mm Iswdpf3 Width: 7 mm Height: 12 mm Year of manufacture: unknown

Condition: good (used), amount 3 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, - Type: 6 H9x2,8+0,1, Rlg 12-30m/m - Stanl. 836 134 WR1/136 C93Caa3 - Item no.: 9.99.SS42 0991551 - Item no.: 6.98.SS42 0981110 Length: 1000 mm Width: 8 mm Height: 9.5 mm Year of manufacture: unknown