Hydraulic Frame Press

INO PRESS 100K-500

Condition: excellent (used), max. workpiece diameter 600 mm Bljdewgizdepfx Afyed threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: good (used), Year of construction: 2007, max. wheel diameter 400 mm gear width 250 mm max. module 8 min. module 0,5 root circle diameter 10 mm number of teeth 5 - 999 ical angle +/- 45 ° weight 12.5 t With Hoffmann filter system: Year of manufacture: 2006 Filter no. 05919 - Type HSF 100 SEK • Grinding wheel flange • 1 grinding wheel Bljdpsyclrpefx Afyjd • 1 original dressing device • 1 set of dressing wheels • 1 sensor -> Very good condition, only 22,500 operating hours

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Bedpsxdc Ehjfx Afyold

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm Bedpfx Aou Ibvusfysld dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Year of construction: 2009, functionality: fully functional, A Scholz glass autoclave with dimensions of 9000 mm length x 3000 mm diameter is an industrial hot-air autoclave designed for the production of high-quality laminated safety glass and is typically a used unit from a specific year of manufacture. General Description and Features: This large-capacity industrial autoclave is primarily utilized in the architectural glass sector for the lamination process, in which layers of glass are bonded with interlayer polymer film materials (such as PVB or SentryGlas) under precisely controlled high temperature and pressure conditions. Key features and general specifications: - Dimensions: The inner chamber measures approximately 9000 mm in length (9 meters) and 3000 mm in diameter (3 meters). - Heating System: Equipped with an electric heating system that ensures consistent temperature distribution throughout the process. - Control System: Features a control panel, typically a touchscreen operator interface, along with digital temperature and pressure controllers (Honeywell), allowing accurate process monitoring and control. - Door Mechanism: Incorporates a rapid-opening closure system designed for industrial efficiency and workplace safety. - Construction: Fabricated from premium-grade materials, most likely carbon steel for the pressure vessel, with internal components engineered to withstand the demands of glass lamination operations. - Applications: Designed primarily for laminated glass, Scholz autoclaves can also be configured for other thermal processing tasks and composite material production—such as fiber-reinforced plastics—depending on customer requirements. Technical Data: Exact operating parameters (pressure and temperature ranges) for units of these dimensions may vary, as Maschinenbau Scholz manufactures each autoclave to suit individual client demands. - Operating Pressure: While typical Scholz industrial autoclaves are rated up to 210 bar, applications in glass lamination generally require pressures between 0.1 MPa and 1.6 MPa (approximately 1 to 16 bar). - Operating Temperature: The glass lamination process typically operates from ambient temperature up to about 150°C, although Scholz autoclaves are capable of handling temperatures up to 650°C for various processes. - Electrical Specifications (example for a used model): - Rated current: 1100A Blodpfx Afjwintkjyod - Service voltage: 400V - Control voltage: 24V, 230V / 50Hz These specifications and details refer to Scholz hot-air autoclaves for glass production, covering dimensions, heating systems, and control technology.

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Blodpfeqw Akmjx Afyed strip thickness: 3 mm coil weight: 10 t

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm Bljdpfx Afjn Awd Reyjd

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Bjdpfx Afodzp Tcsyeld Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruis Y-beweging of kolom: 650 mm Verticale Z-verplaatsing of freeskop: 3000 mm Horizontale W-verplaatsing of freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopondersteuning / ondersteuning van de versteviging van de broche Ondersteuning van boorspindels / ondersteuningsportefeuilleverhogingen Bsdpfov Sfm Uox Afyeld Cross traverse Y-axis (table/column): 650 mm (column) Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Bjdpodzqlvefx Afyold Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition