IMA BIMA/300/125/530 4-axis CNC machining center (2012)

IMA BIMA/300/125/530

- Machining area: 5300x1400 mm
- Main spindle replaced 3 years ago
- 18-position tool changer

Technical data
Machining area
- In the X direction: 5300 mm
- In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm
- In the Y direction with drilling unit: (all vertical drills) 890 mm

- Single-position machining: X = 2 x 2550 mm
- Free space in the center: X = 200 mm

- Alternating field machining: X = 2 x 2250 mm
- Free space in the center: 800 mm

1 automatic tool/adapter changer magazine
- Arrangement: mounted on the support, moving in the X direction
- Disc changer with 18 magazine positions

Guidance system
- All axes are equipped with pre-tensioned, surface-hardened precision roller guides.

Central lubrication
- Manual central lubrication for all main axis linear guides and Z ball screw.

1 vacuum pump, 90 m3/h

Console table consisting of:
- 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction
- 10 adjustable support arms in the X direction, each with a rear stop
- All stops are controlled by the program
- The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses.
- 8 smooth support rails, automatically retractable
- 2 push buttons for the workpiece clamping/releasing function

Additional 2nd vacuum pump, 90 m3/h

1 additional central stop row, for centering workpieces

Hjdpfx Aozuw Rtjh Ejnr
Chip conveyor

1 main spindle
- Drive power: 10.0 kW in S-6 operation
- 7.5 kW in S-1 operation
- Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893
- Speed range: infinitely variable RPM, programmable

1 centrally integrated CNC axis, rotating 360 degrees
- for all adapter units, with torque support on the main spindle and pneumatic interface

1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter
- Horizontal drilling units with 2 outputs each

Attachment unit for a dado cutter
- Swivel range: 0 or 90°

Control system ICOS CNC
Modern, powerful PC-based control system with:
- User-friendly interface with Windows standards
- Trajectory control of all servo axes
- Job list / order processing
- IMA backup and recovery system on two hard drives
- Uninterruptible power supply (UPS)

IMAWOP software package
- for dialog-oriented creation of CNC machining programs
- - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

The listing was translated automatically. Translation errors are possible.