Vertical machining center

HURCO VMX 30 t

Condition: used, Year of construction: 2008, Hurco VMX 30 T vertical machining center 3-axis Year: 2008 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs Fpjdsz I Sx Njpfx Ahdjn X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - Through spindle coolant - software options Under power in our warehouse.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel Fodpfx Ahstrhq Hodopn - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: ready for operation (used), Year of construction: 2007, Hurco VMX 30 T vertical machining center 3-axis Year: 2007 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank Fjdpfx Asz H Nvijhdspn - Spindle coolant unit - Chip conveyor - software options Under power in our warehouse.

Condition: like new (used), Year of construction: 2008, operating hours: 1,780 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Fpjdoz Elldepfx Ahdjn Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system Fpodpfxsrr Ehme Ahdjn - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Fpodpfx Ajy Naacjhdon Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, operating hours: 11,870 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm A axis -35/+110 degree C axis 0 - 360 degree Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories, features - KITAGAWA TT251 nc round table - Coolant through spindle 20 bar - Coolant unit - Spindle cooler - Chip conveyor - SW options: 3D, DXF, pocket islands, rigid tapping, NCPP, ISNC, realistic graphics, material and tool databank, surface selection, - machine mounths Fedpfsy U Hvhex Ahdopn - external hydraulics The machine is still under power and can be inspected in operation.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Fedpjy R Rn Hjfx Ahdepn Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit