Planer

Hundegger

Year of construction: 2006, condition: ready for operation (used), Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details. • Condition/use: Good condition; regularly maintained; used only in own operations; no multi-shift operation • Color: RAL 5012 blue Dkjdpfxsza A Ddj Apden • Capacity: • Maximum log length at infeed: 13 m • Maximum log length at outfeed: 12 m • Installed working units: • Under-table swivel crosscut saw • 4-axis universal milling unit UF4 • Roller cutter • Finger cutter • Dovetail cutter • Combination support for vertical tools • Drilling unit 2.2 kW • Drilling unit 3.0 kW (reinforced) • Combination support for horizontal tools • Additional drilling unit 2.2 kW • Slotting unit • Marking unit Additional equipment • Infeed cross conveyor, 5 horizontal strands, 2.2 m, with flat belt chain • Infeed strand with shaft extension • Extension stand with feed mechanism • 6-arm discharge table • Fully automatic pneumatic beam turning station • Finished wooden support surfaces • Label printer

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70 Djdshpbthepfx Apdjkn

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. Dkedpfx Apozbnkfjden The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: good (used), total length: 24,000 mm, overall weight: 11,000 kg, HUNDEGGER P10 – CNC AUTOMATED TIMBER PROCESSING CENTER For sale: a Hundegger P10 machine designed for processing timber components. The machine is in good working order and is currently in production. Until July 15th, there is an opportunity to view the machine in operation and check all its functions before purchase. Key information: * Machine in continuous operation * Demonstration of operation possible * CNC control * Processing of roof truss elements, frame structures, and other carpentry components * High accuracy in performing joints * Design known for its durability and ease of maintenance Dkedpfx Apoza T Sxsdon Unlike many machines offered after disassembly, here the buyer can verify the technical condition during normal operation of the facility. The machine is available for inspection by appointment. More information, photos, and videos of the machine in operation will be provided to interested parties.

Condition: repair required (used), functionality: unexamined, Dimter HK 400 Finger Jointing Line Dodpfx Apsvi Hw Njdokn Finger jointing line for wood packages Input lengths: 800–6,000 mm Milling height: 285 mm, optionally 300 mm Color: Blue Comprising: Item 01 Package Formation Item 02 Package Roller Conveyor Item 03 Central Milling Unit Item 04 Package Roller Conveyor Item 05 Package Destacker Item 06 Chain Cross Conveyor Item 07 Infeed Roller Conveyor Item 08 Cycle Press Item 09 Feed Unit Item 10 Crosscut Saw Including control cabinet The machine requires repairs and is being sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. Should you have any questions about the line or require technical information, please feel free to contact us at any time. We will be happy to assist you with advice during repair and installation.

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Djdpfjyy Nnqsx Apdjkn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece width (max.): 1,300 mm, workpiece height (max.): 300 mm, Cut-to-size and fabrication services for timber construction in Hungary We offer cut-to-size and fabrication services in Hungary for a wide range of timber construction projects. The structural design is carried out using SEMA software, which ensures precise and efficient production. Djdpfsykyhujx Apdokn On our Hundegger ROBOT-Drive 1300 cutting center, we produce prefabricated timber structures, timber frame buildings, prefabricated houses, log houses, and other timber constructions – with the highest level of flexibility, quality, and efficiency. Whether it's carpentry work, timber frame construction, log house construction, timber framing, glued laminated timber construction, or the processing of cross-laminated timber (CLT), the powerful 6-axis robot unit with automatic tool changer is perfectly equipped to meet all the requirements of modern timber construction. Technical advantages: * Individually adaptable to the specific tasks * Equipped with a 5-axis sawing, slotting, and marking device to increase throughput * Timber cross-sections from 20 x 60 to 300 x 1,300 mm * 6-axis technology = processing of 6 component sides in a single cycle * 6-axis technology = use of 24 different tools * 6-axis technology = previously unknown processing possibilities Your reliable partner for cut-to-size and CNC timber processing.

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of Dkedpfx Apeq Rvrboden 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Condition: good (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 7105, feed length X-axis: 16,500 mm, feed length Y-axis: 1,300 mm, workpiece weight (max.): 1,000 kg, cutting height (max.): 300 mm, total length: 45,300 mm, total height: 5,700 mm, cutting width (max.): 1,300 mm, total width: 16,800 mm, control cabinet width: 730 mm, saw blade diameter: 800 mm, overall weight: 31,000 kg, control cabinet length: 4,500 mm, control cabinet height: 2,500 mm, working length: 20,000 mm, working width: 13,000 mm, Equipment: safety light barrier, HUNDEGGER K2-Industry 1300 fully automatic sizing machine, consisting of: 1 ABM-I125 1 K2-Industry 1300 basic equipment, including: - Saw unit 13 kW - Automatic beam turning station - Control panel and switch cabinet - Safety devices 2 ROB-2500 1 Hundegger production program CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning device "Two-hand system" - with servo drive in the positioning carriage 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance Base machine price 7 ABM-1232 1 Machine frame K2-Industry 1250 - special length - price per meter 8 ABM-1816 1 Extension and encapsulation - Machine enclosure including preparation for dust extraction 9 ABM-2151 1 Infeed cross conveyor and infeed roller conveyor for max. wood length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-cut components 11 ABM-2851 1 Rough wood holder in front of the universal saw (multi-length processing) 12 HH-8501 1 Adjustable safety impact plate - infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Revolving milling unit - vertical (installed from above) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combined support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic - drilling direction vertical 18 ABM-5400 2 Vertical finger milling cutter 5.5 kW 19 ABM-B61 1 Combined support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW - drilling direction horizontal 21 ABM-5220 1 Pivoting drilling unit 45° (3.0 kW) - drilling direction horizontal 22 ABM-5751 1 Slotting cutter 7.5 kW - on the stop side 23 ABM-5500 1 Longitudinal and transverse groove milling cutter 24 ABM-5776 1 Slotting cutter 7.5 kW - on the operator side with pre-positioning (Y-axis) 25 ABM-4101 1 Double combined support - (on the stop and operator side) Dsdpfjza Ehrjx Apdskn 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combined support 27 ABM-6000 1 Marking device at the rear (on the stop side) 28 ABM-6040 1 Marking device at the front (on the operator side) 29 ABM-6100 1 Marking and labeling device at the bottom 30 ABM-6180 1 Marking and labeling device at the rear (on the stop side) 31 ABM-6300 1 InkJet 4 system HP - on the stop side 32 HH-8610 1 Label printer at the control panel 33 ABM-2900 1 Wood removal hood = flap for removing short components on the under-table swiveling miter saw 34 HH-8640 1 Additional cost for a mobile control panel on rollers 35 HH-8645 1 Direct control of planing machines 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional wood storage point 38 ABM-8300 1 Feed roller from above 39 ABM-8416 14 Extension roller conveyor with adjustable rollers, max. width 1300 mm 40 HH-8521 1 Adjustable safety impact plate - discharge roller conveyor 41 AH-9001 2 6-strand transfer cross conveyor with wide flat belt chain HUNDEGGER Pick & Feed System designed for the following workpiece dimensions: Length: 2,000 - 15,000 mm Width: 100 - 680 mm Thickness: 60 - 300 mm Max. part weight: 400 kg Performance max.: 1 cycle in 1.5 min Stack dimensions: Length: 2,000 - 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with suction gripper Pos. 3 Spacer rack Pos. 4 Safety technology Pos. 5 Stack pattern input aid Pos. 6 Increase max. workpiece weight to 1000 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing Dkjdpjza Dzdefx Apden - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW Dksdpfx Asiqflbspdon left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: used, Year of construction: 2011, Panel processing machine Manufacturer: Hundegger Type: SPM-2 Speed Panel Year of construction: 2011 CNC control SPM-2 for panel size 3,200 x 2,600 mm Dkjdpfx Apjy R S Insdjn Milling unit 6 kW Maximum speed: 23,500 rpm Milling tools, maximum outer diameter: 100 mm Cutting length of milling tools, maximum: 60 mm Z-axis: positioned and moved by spindle units 5-axis milling unit 6 kW Milling spindle motor: 6 kW, frequency-controlled Maximum speed: 23,500 rpm Milling unit rotatable by 360° in the Z-axis Tilt up to 46° to the Z-axis Milling tools, maximum outer diameter: 20 mm Cutting length of milling tools, maximum: 60 mm Z-axis: moved and positioned by spindle units Ink-jet marking head Maximum character height: 50.8 mm Colored prints possible Z-axis pneumatically actuated Head can be automatically swiveled by 180° Automatic destacking system Electronically controlled lifting table Maximum lift: 1,000 mm Maximum load: 4,000 kg Lifting table can be unloaded from the front with a forklift or from above with a crane Circular saw unit 2.2 kW Saw blade diameter: 180 mm Cutting width: 3 mm Rotational angle adjustable by servomotor: 360° Tool drive power: 2.2 kW Speed: 6,000 rpm (vc=56.5 m/s) Maximum cutting depth: 40 mm Z-axis, electrically driven via trapezoidal screw Extraction directly at the tool Processing portal: with a combined support guided on linear guides and driven by a servomotor, to which all processing units are attached. Gripping and positioning carriage with four pneumatic, individually adjustable material grippers. Gripping and positioning carriage runs on round guides. The guide is supported by coated infeed and outfeed tables. Electrically driven cross-sliding guide for moving the finished panel parts out. Availability from 11/2026 Reference no.: L2170 19526ä

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Dodjy Nx Eqopfx Apdekn Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format - Line length 30 meters - Additionally a spare saw - Video available The line is 100 % FUNCTIONAL Dkjdpfx Aoulvldspden

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: K2, cutting width (max.): 650 mm, type of input current: three-phase, Equipment: safety light barrier, The machine consists of: - 5-axis milling unit - Saw unit with 700 mm blade - Horizontal drilling unit for beam drilling - Automatic reference marking system for assembly positioning - Circular saw residue extraction system - Automatic loading system - Automatic unloading system - Automatic beam rotation system - Maximum workable dimensions: 640*260*16000 mm The tools included with the machine are: Dkedpfx Apjy Ruhdoden - Universal cutter head 350x100 - Disc cutter 350x40 - End mill 50x200 - End mill 30x230 - Drill bit set for drilling unit - Dovetail cutter for beam joinery The onboard PC has been recently replaced and all regular maintenance has always been performed using original spare parts.