Round table

HOFMANN STH 400

Condition: used, Year of construction: 2010, Swivel spindle milling machine Year of manufacture 2010 workshop checked Spindle inclination from - 45 ° to + 45 ° right and left rotation of the spindle Spindle diameter 30 mm height adjustment 120 mm Motor 7,5 kW Speeds 3000/4500/6000/900 rpm Tsiyvwoqs electric adjustment of height and tilt with LCD display push button for soft start milling arbor with quick clamping nut for fast cutter change with table enlargement 2050 x 815 mm with extendable table support milling fence 2610 with LCD display with swinging device for the milling fence with 4-roller feed suction nozzle 2 pieces a 120 mm Space requirement 2000 x 1080 mm Weight approx. 920 kg Availability: by arrangement Storage location: Hochheim Pictures show machine in not yet checked condition

Condition: used, table milling machine, manufacturer: HOFMANN, type: TFS 1245, year: 2006, serial no.: 125-0188, with 3 roller feed HOLZKRAFT VSA-308, year: 2005, suction device Rypxcuki

Condition: good (used), . Bijcejjdax8 Manufacturer : HOFMANN Type: NG-1 max. disk diameter 320 mm max. support weight 20 kg - without balancing mandrel - . .....

Condition: used, Year of construction: 1999, Table milling machine Hofmann TFS 1200 Oikykwz 380V Spindle Degrees&nbsp + 45 to - 10 Diameter 40mm Main motor 5kW Feeder Masterwood MEC 4R 4 feed rollers conductor Aigner

Condition: good (used), Year of construction: 2013, Operating hours: 9,999 h, Hersteller: Hofmann Wärmetechnik GmbH Istjls3 Typ: Wärmebehandlung TSL Baujahr: 2013

Condition: excellent (used), CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - roller width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from below - lower shaft motor 1.5 kW - toothed shaft pulling from above - upper shaft motor 1.5 kW - belt feeder - length of the conveyor belt 5400mm - width of the conveyor belt 400mm - main engine 30kW - auto reverse, - reverse gear - dimensions of the machine length / width / height 2200x1450x1150mm - dimensions of the feeder length / width / height 5300x550x500mm - weight 1950 kg – German production, – used chipper, very good condition Bosrkkvois Net price: PLN 85900 Net price: 19523 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2002, Balancing in vertical plane, such as brake disks ec Cporrsnn

Condition: used, Year of construction: 1974, Second hand machine spindle diameter: 30 mm 6 spindle speeds: 3.000/4.000/5.000/6.000/8.000/10.000 rpm Vxg2mm Machine has no motor brake ! Location: Solingen Availability: short term

Condition: new, machine/vehicle number: 01-08070, Plastic endless belt for oil cleaning. Completely new, packed and ready for immediate delivery. Item number: 74-41515070 Make number: 01-08070 Bhwupzgtzex Dimensions: 5150 x 995 mm 70µ

Condition: used, Planer-thicknesser Oilzojb Hofmann Combi-600Max planing width 600mmMax planing height 200mm2 knives2 bottom rollers in the table380V

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 5015/0018, Make: Hofmann Bb272oyules Type: HL16-RE

Condition: ready for operation (used), - USED - DIVIDING TABLE Cawzrobjoi

Condition: used, used, good condition make Hofmann type MU 2 machine no. 18928 E2mdymq storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Condition: as good as new (ex-display), Year of construction: 2014, - dimensions: length 9,400 mm, total height 4,880 mm, width 1,940 mm - press weight: 18 t - electrical input: 26 kW - bale binding: automatic, vertical, 4 wires 2un0v3 - package size: 800 x 800 mm - adjustable length of packages: 800 - 2,200 mm - hopper size: 1,500 x 740 mm - pressing force (maximum): 75 t - volume of the pressing chamber: 1.25 m3 - specific pressure on the press material: 12.5 kp / cm2 (i.e. 125 N/cm2) - oil filling: 800 l - volumetric output: 209 m3 / hour - mass output (t/h) when pressing materials with different bulk weights: at 100 kg/m3 …………….. 8.5 – 12.0 t/h. at 40 kg/m3 …………….. 4.2 - 6.0 t/h. at 10 kg/m3 …………….. 1.2 - 1.9 t/h. - number of cycles: 2.7 / min. - power of the main hydraulic pump: 155 l / min.

Condition: used, machine/vehicle number: 129-31447, Neue Ausstellungsmaschine!! Listenpreis 53.740€ netto! -Bewährte Gussausführung -Tischgröße 1.250 x 815 mm, stark verrippter Gusstisch, feinst gehobelt; Maschinenhöhe 895 mm -Tisch mit Tischschieber. Einstellung über Gewindeantrieb, inklusive zwei Tischeinsätzen aus Aluminium mit Hart-coat Beschichtung für Werkzeuge bis Ø 175 mm und bis Ø 250 mm -Elektrische Schwenkverstellung der Frässpindel von -47,0° bis +47,0° im Eil- und Schleichgang -Elektrische Höhenverstellung der Frässpindel, ca. 115 mm bei senkrechter Spindel, im Eil- und Schleichgang -Bedienelemente im Schaltpult nach oben -CNC-Steuerung V 20 -Zwei-Achsensteuerung für Fräshöhe und -schwenkung -12,1 Touch Monitor im modernen Bedienpult -Klar gegliederte Bedienoberfläche. Struktur der Bedienfelder und die Symbole sind in allen Masken gleich. -Symbole sind textunterstützt Permanente Navigationsleiste, daher kein Wechsel zwischen den Masken -Einfache, selbsterklärende Bedienerführung durch Hinweis- und Informationszeilen. -Masken: Manuell, Programm und Werkzeug -Programm mit unbegrenzten Programmplätzen. Es werden die Achsen Fräshöhe und Spindelschwenkung, optional Frästiefe und Höhe Vorschub hinterlegt. -Kopierfunktion für Programmplatz -Bildliche Darstellung des Werkstücks. -Werkzeug mit unbegrenzten Werkzeugplätzen. Es werden alle Daten des verwendeten Werkzeugs hinterlegt. -Markierfunktion für den Nullpunkt des Werkzeugs -Kopierfunktion für Werkzeugplatz - Bildliche Darstellung der Werkzeuge. -eigene Fotos für Werkstück und Werkzeug können mit USB-Stick eingefügt werden -Jeweils Listensuchfunktion für Programm und Werkzeugplatz über „Filter. -Ordnerverwaltung - Funktion Taschenrechner -Bedienungsanleitung und Schaltpläne sind im Bereich „Service hinterlegt -komfortable Referenzfahrt für alle Achsen -Die Positioniertaste leuchtet, wenn Soll-/ Istwerte nicht übereinstimmen Feineinstellung bei laufender Spindel über Sicherheitsverschaltung möglich für Fräshöhe (und -tiefe) -Datenschutz durch Code -USB-Schnittstelle für Datensicherung inkl. HOFMANN Stick mit Datenstruktur -Werkzeugspannsystem Clamp-Fix HSK-F63 -pneumatisch zu lösen (schlüssellose Bedienung) inkl. Fräsdorn HSK-F63 Ø 30 x 140 mm und Werkzeugmontagestation für den komfortablen Werkzeugwechsel außerhalb der Maschine -Stufenlose Drehzahlregulierung über Direktantrieb von 1.500 bis 10.000 UpM; inkl. 7,5 kW Motorspindel; (bauseits wird ein allstromsensitiver FI-Schutzschalter benötigt) 7,5 kW Motorspindel beinhaltet Betriebsart S1 und S6 (nur dies gewährt ein zuverlässiges Arbeiten ohne Ausfälle bei Überlast) S1 = Dauerbetrieb mit Leistung von 7,5 kW S 6 = Dauerbetrieb mit Aussetzbelastung mit Leistung von 10,5 kW -im Ständer integriertes Zubehörfach Cxj0ngq0iw -doppelseitige Schwenkaggregatlagerung in 2 Segmentführungen -Fräsanschlag Typ 2601 Effizient mit Gesamtverstellung über Handrad nach Digitalzähler und Backenfeineinstellung der Einlaufbacke über Zylinderdrehknopf, mit Nonius. Gussanschlagbacken 500/500 mm mit Aufnahme für Sicherheitslineale und Kehlbrett. Werkzeug-Ø max. 250 mm. -Maschinensteckdose abgesichert mit Stecker für Vorschubapparat mit Ein-/Austaster im Maschinenschaltpult -HOFMANN Frässchutz „Centrex, Bogenfrässchutz TAPOA zum Fräsen am Anlaufring mit Absaugstutzen

Condition: used, Year of construction: 2008, machine/vehicle number: 125-1652, mit 4-Rollen Vorschub, Baujahr 2008, 8 Geschwindigkeiten Schwenkbereich - 45° bis + 45° Tischgröße 2050 x 815 mm inkl. ausziehbare Auflage Tischhöhe 890 mm Bg0swifutuw Tisch mit Tischschieber ( anstatt Tischringe ) Fräsanschlag Typ 2610 Einstellung über Handrad nach LCD-Anzeige Umschaltmöglichkeit auf Werkzeugnullmaß Abschwenkvorrichtung für Fräsanschlag Splitterzunge Alu eloxiert Fräsdornwechselsystem mit Schnittstelle HSK-F80(C) Spindeldrehzahlen 3000/6000/4000/8000/5000/10000 U/min Schaltpult oben Rechts/Linkslauf elektrische Spindelblockierung Motor 6:7 / 7:8 KW Lagerort: Lieferant

Condition: used, Year of construction: 1973, workpiece weight 100 kg workpiece length 1000 mm diameter 500 mm B3pvp7spff centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,6x 1x1,6 m

Condition: used, Year of construction: 2004, balancing body max.: 120 kg balancing body diameter w/o machining unit: mm balancing body diameter with machining unit: mnm rotation weight: 120 kg Rotor-Ø: über Bett: ca. 800 mm Bearing journal Ø: 10-40 und 30-80 mm bed length: 1600 mm voltage: 400 / 50 V/Hz connected load: 9,3 kVA total power requirement: 2,2 kW Weight approx.: 1,1 t dimension machine xH: ca. 2,2 x 1,5 m dimensions electric cabinet: mm Measurement equipment: Measuring electronics PCX: -Measuring method Force measuring -measuring range electronil speed 60 to 30,000 rpm. 2 pieces bearing pedestals: -Bearing length between the bearing pedestals up to approx. 1200 Dlqbsb -bearing journal Ø 10 to 40mm and Ø 30 to 80mm

Condition: excellent (used), Year of construction: 2015, Thermal deburring 3f39efdu

Condition: new, Year of construction: 2023, GREEN POWER 1500 rpm generators are designed for versatile applications ranging from construction to industry and from agriculture to disaster relief. Solid electro-welded steel frames with built-in tank of different capacities from Green Power, engines and alternators from the world's most important manufacturers in the sector, as well as state-of-the-art control units are the elements that can guarantee top performance. Quality generators. Canopies are made of steel and can therefore also be used in tropical environments. Green Power canopies guarantee maximum accessibility for maintenance and cleaning work. Design and production at the company's factory are Green Power's strengths. Cbtxytsfz0 This peculiarity favors the reduction of time to market and also enables customer-specific adaptation of the products. TECHNICAL DATA: emergency generator Maximum power: 550 kVA 440 kW Nominal power: 500 kVA 400 kW Frequency: 50Hz Voltage: 400V and 230V GENERATOR: Manufacturer: Stamford Model: S5LD-C Voltage regulation: AVR Electr. 0.5% Contactor: IP23 ENGINE: Manufacturer: PERKINS Model: 2506A-E15TAG2 Speed: 1500 rpm Displacement: 15,200cc. 6 cylinders Water cooled Fuel: diesel Fuel consumption: 76L/h at 75% load UNIT: Tank capacity: 260L Weight without fuel: 4430 kg Dimensions: 4500x 1450x 2250mm Sound level: (7 m): 69 dB STANDARD EQUIPMENT Multifunction display: Automatically COMAP IL4AMF9 Voltage display Power display Display kVA Generator protection indicator Hour counter Battery charge indicator Engine working hours Generally: Emergency stop button (one outside the group and one on the control panel

Condition: used, machine/vehicle number: 120-02579, Neue Ausstellungsmaschine!! Listenpreis 22.433€ netto · Tischgröße 1.200 x 815 mm, stark verrippter Gusstisch, feinst gehobelt; Maschinenhöhe 890 mm · Tischringe Æ 262/220/160/115 mm; · Werkzeug Æ 250/200/140/100/65 mm · Fest eingebaute Frässpindel (nicht wechselbar) mit Fräsdorn Æ 30 mm inkl. Schnellspannmutter „fix (für den schnellen, komfortablen Werkzeugwechsel – ohne Spindelblockierung), Aufspannlänge 140 mm · Elektrische Höhenverstellung der Frässpindel ca. 145 mm im Eil- und Schleichgang, LED-Anzeige auf 1/10 mm, mit Umschaltmöglichkeit Absolutmaß/Kettenmaß · Elektrische Schwenkverstellung der Frässpindel von -45,5° bis +45,5° im Eil- und Schleichgang, LED-Anzeige auf 0,1° · 4 Drehzahlen 3.000/4.500/6.000/9.000 über Stufen-Riemenscheibe, · Drehzahlanzeige Cxc7g2kdwp · Elektronisches Anlauf- und Bremsgerät · Links-/Rechtslauf, Rechtslauf über Zweihandbedienung mit Warnanzeige · Schaltertafel übersichtlich im Maschinenständer integriert · Fräsanschlag Typ 2601 Effizient. Gesamtverstellung über Handrad nach Digitalzähler und Backenfeineinstellung der Einlaufbacke über Zylinderdrehknopf nach Skala auf 0,1 mm mit Multiplex-Anschlagbacken (Nach Abheben des Anschlags ist der komplette Tisch frei verfügbar · nach Wiederaufbau muss keine Referenzfahrt durchgeführt werden) · Maschinensteckdose CEE-16A6h abgesichert mit Stecker für Vorschubapparat. Ein-/Austaster hierfür in der Schaltertafel · Maschine wartungsarm · 2 Absaugstutzen 120 mm Æ am Anschlag und unterhalb des Tisches. Luftgeschwindigkeit 20 m / sek. · Elektrische Ausrüstung nach VDE/EN 60204 und EN848-1 mit Hauptschalter, Not-Aus-Schlagtaster, Motorschutz und Wicklungsschutz, Unterspannungsschutz, Kontakt zum Ansteuern der Absaugung · Zubehör: HOFMANN Frässchutz „Centrex, Bogenfrässchutz TAPOA zum Fräsen am Anlaufring mit Absaugstutzen, Bedienwerkzeug, Fettpresse, Bedienungsanleitung · Lackierung: grauweiß, signalblau, weißaluminium · Gewicht: ca. 850 kg Zusatzausstattungen: Tischgröße 2.000 x 815 mm inkl. ausziehbare Auflage um 480 mm Fräsanschlag Typ 2601 Effizient mit LCD-Anzeige (mit Umschaltmöglichkeit auf Werkzeug-Nullmaß), anstatt Digitalzähler Multiplex Anschlagbacken, auf Wunsch AIGNER Integralanschlag gegen Aufpreis möglich. Wechselbare Spindel MK5, anstatt fest eingebauter Frässpindel inkl. Fräsdorn Duo D= 30 mm mit Schnellspannmutter „fix. Mechanische Spindelblockierung direkt an der Frässpindel Schaltpult nach oben

Condition: used, Balance weight, wheel weights, balancing weights -25g Ciyv0ru -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Condition: excellent (used), Year of construction: 2006, Hofmann D 512 planer cast-iron frame working width 505 mm planing height 275 mm sectioned notched rollers new rear rollers digital height display 7.5 HP motor Bfuttxfivn3 see data sheet

Condition: used, Year of construction: 2004, balancing body max.: 2000 kg balancing body diameter w/o machining unit: 1500 mm balancing body diameter with machining unit: mnm bed length: 3000 mm swing diameter: mm rotor-shaft: Ø 1500 über Maschinenbett voltage: 400 / 50 V/Hz total power requirement: kW Weight approx.: ca. 5,5 t dimension machine xH: 7,5 x 1,5 x 2,0 m dimensions electric cabinet: mm drive power: 22 kw connected load: 25 kVA Balancing speed: F8lkocy37 5 gears and reverse gear max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm incl. measuring electronics PCX Measuring method force measuring Measuring range of electronics speed 60 to 30,000 rpm. 2 pcs. bearing pedestals: -bearing length between bearing pedestals up to c. 4500mm bearing journalØ: 40 to 178mm and Ø 140 to 445mm

Condition: good (used), Hofmann spindelmouder with tiltable spindel Type: TFS 1200 Lz2aawotc Tilting: -5 degree -> 45 degree Spindel diameter: 40 mm Spindel length: 180 mm Motorpower: 6,5/8 kW

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 400 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 14.220 mm Number of bays per row: 05 pcs. Bfiswbuuliy Number of levels incl. floor traverse: 03 pcs (incl. floor level). Volume technical data: Pallet spaces per bay: 06 pcs. Total pallet spaces: 36 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 06x pallet rack stand, used material color: green upright profile: U 120 x 60 x 4,00 mm Incl. cross and diagonal braces, base plates (approx. 130 x 100 x 4 mm) The stands are pre-assembled ( welded truss ) 4.020 mm high 950 mm deep 20x pallet rack truss, used material color: green INP profile: 100 x 50 mm type of truss: TRN1-270-10-I agraffe: 5 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.500 kg, with evenly distributed load 10x pallet rack traverse, used design: floor traverse material color: green INP profile: 100 x 50 mm type of truss: TRN3-270-10-I agraffe: 5 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.500 kg, with evenly distributed load 60x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 15x depth web frame, used execution: transverse bearing material color: sendzimir galvanized for rack depth: 950 mm clear span: approx. 850 mm cross beam support: approx. 50 mm total width: approx. 2.680 mm bay division inside: approx. 1.295 x 950 mm Cross-connector: L: approx. 2,680 x 50 x 1.50 mm (LxDxH) Support angle: L: approx. 950 x 150 x 50 x 3.00 mm (LxDxH) 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for leveling of the racks that are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2000, Face plate diameter 400 mmConus 105 mmhole circle 135Age estimated Bfxx7kjsa3

Condition: new, Year of construction: 2023, the following options are built in: -Laser (battery operated) -drilling unit swiveling 65*-0*-65* -a second eccentric clamp Standard equipment: table height 930 mm Table size 760 x 350 mm, heavily ribbed cast iron table with hardened guide bushes Beoyslxq2kn Lowerable workpiece stop, adjustable to three heights Pushbutton control for automatic start and stop Motor power 1.5/1.9 kW Drilling spindle speed 1.500/3.000 rpm, braking device drill chuck with protective sleeve, clamping range 1-20 mm adjustment travel: depth 210 mm, height 150 mm, width 420 mm executed in easy running profile rail guide Height adjustment of drilling unit via handwheel with digital display accurate to 1/10 mm Drilling depth stop with scale and fine adjustment frame dowel stop 3-fold reversible, with hardened guide bushes 1 eccentric clamp with cross head 2 reversible pressure columns (guided in T-slots) to accommodate eccentric or pneumatic clamps dowel drilling device with pitch 16-22-25-32 mm Machine can be moved under with lift truck CEE plug connection via device plug 400V-16A Suction nozzle 120 mm Ø with integrated chip suction channel underneath the table Price is net ex stock Haldensleben You will receive an invoice with VAT Shipping by forwarding agency possible

Condition: new, 3-way connection with plug-in coupling and connection thread 1/2 " Bwhcgbbbrr 3 pieces available

Condition: excellent (used), Year of construction: 2007, Comefri TLZ 400 centrifugal fan, double inlet TLZ 400 radial fan, double inlet air delivery: max 30000m3/h air density: 1.2 kg/m3 Bcqbsisurum maximum speed: 1700 rpm absorbed power: 9kw maximum pressure: 1800 pa number of blades: z38 High capacity and efficiency Fan with forward curved impeller double input for belt drive impeller with pre-curved, galvanized sheet steel blades exhaust opening 507x507mm, shaft d=30mm ​Részletek keresése

Condition: excellent (used), Year of construction: 2004, HOFMANN swivel spindle milling machine TFS 1200 Battxzndwic Year of manufacture 2004 S/N 127-01323 manufacturer: Hofmann Bad Windsheim from a training company very good condition manual height and swivel adjustment for fine tuning analog display for height adjustment, height adjustment 125mm table size 1200 x 820mm and table extension 200 x 820mm swivel range -5° to + 45 spindle speed 3000/4000/5000/6000/8000/10000 rpm. milling spindle D=30mm milling arbor MK5 motor 4,7 Kw / 6,3 PS Suction nozzle D=120 mm Lateral roller table with eccentric hold-down and adjustable angle stop Height adjustable with hand wheel CE mark Weight 1300 Kg

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 400 Technical data for installation: Number of rack rows: 01 pcs. Number of levels Incl. floor traverse: 03 pcs. (Incl. floor level) Included in delivery: 06x pallet rack uprights, used Material color: green Upright profile: U 120 x 60 x 4,00 mm Incl. cross and diagonal braces, base plates (approx. 130 x 100 x 4 mm) The stands are pre-assembled ( welded truss ) 4.020 mm high 950 mm deep 20x pallet rack truss, used material color: green INP profile: 100 x 50 mm type of truss: TRN1-270-10-I agraffe: 5 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.500 kg, with evenly distributed load 10x pallet rack traverse, used design: floor traverse material color: green INP profile: 100 x 50 mm type of truss: TRN3-270-10-I agraffe: 5 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.500 kg, with evenly distributed load 60x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 120x steel panel with support angle, second-hand manufacturer: SSI Schäfer material color: hot galvanized total depth: approx. 960 mm total width: approx. 300 mm total height: approx. 50/40 mm supporting surface: approx. 16 mm Weight | pc.: approx. 7,650 kg 15x steel panel end termination, used manufacturer: SSI Schäfer material color: hot-dip galvanized total depth: approx. 960 mm total width: approx. 300 mm total height: approx. 50/40 mm Weight | pc.: approx. 7,830 kg 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for leveling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, Dl0zh2 manufacturer and commission number Dimension: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Faceplate Diameter 400 mm KKG 6 Height 100 mm Bayonet lock 3rncf87ip

Condition: used, Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 Gipvebrlm -Manufacturer: Hofmann -Type: KRE80-321 -Best. No.: 229.810.00 -Dimensions: -Weight: 7.8 kg

Condition: used, Year of construction: 1960, machine/vehicle number: 17/60/8/1029, Power supply 1,5 kW, 380 V table size 700 x 300 mm Table height adjustment via handwheel 2 lever operation WxDxH: 1000 x 1150 x 1450 mm weight approx. 300 kg Ce8l7trwdo

Condition: used, Year of construction: 1982, workpiece weight 60 kg workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t G7u9wm9 dimensions of the machine ca. m

Condition: used, Year of construction: 1973, with angle joining unit for simultaneous joining with long table 3000 mm used, good condition make Hofmann type AHW 500 L year of construction 1973 machine-Nr. 14-73-5-873 motor 4,0 kW planing width approx. 510 mm table length feeding approx. 1500 mm Czwr0xsnlx table length removal approx. 1500 mm table lips low noise number of knives 2 pieces motorized brake via hand switch space requirement approx. 3000 mm x 1000 mm x 1400 mm weight approx. 1000 kg storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Hbh2cs97nv Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Faceplate diameter 400 mm 2x807bham Curls district 133 mm KKG 6 1 bolt circle diameter with 4 holes 14 mm wide

Condition: excellent (used), Year of construction: 1984, Board Cutter Ffylokps2

Condition: new, Year of construction: 2023, Planing width 505mm planing height - thickness planing 3,5-245mm length of planing tables 2.400mm strongly ribbed cast iron tables, finely planed serrated table lips joint planing tables can be folded up thickness planing possible WITHOUT folding up the planing tables Planing fence can be tilted up to 45 Planing fence with TELESKOP bar - space saving approx. 200mm Auxiliary fence integrated on fence Dimension display integrated on joining fence Thicknessing table on 4 supporting spindles and 4-fold guided Sartk ribbed, fine planed thickness table made of cast iron, length 1000mm + each side 300mm extension chip removal 5mm planing and 8mm thickness planing Bffa0jtnvc motor power 7,5 kW Positioning control of the thicknessing table adjustment by dimension input and motorized automatic adjustment Sensor monitoring Rubber infeed and outfeed rollers 2 feed speeds 7+14 m/min SUVAmatic planer guard TERSA 4-fold planing shaft

Condition: new, Sold are 6x high performance heating cartridges from HASCO Art. no.: Z111 12,5x100/400 Price is for 6x pieces The parts are still unused in original packaging. Sale without warranty or return. Shipping possible +shipping costs according to effort Baef78nowz2

Condition: not inspected (used), Year of construction: 1974, machine/vehicle number: 13-78-13, Connected load 3kW planing width 410 mm 2-blade shaft with strip planing blades Ccvqlpvg3a connection suction 140 mm pick-up table length 1430 mm pick-up table length 1070 mm

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm Cb79ntk base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Surface plate Dimensions 300 x 400 mm weight 32 kg Ckrrrexe in wooden case

Condition: good (used), Year of construction: 2000, Planing width/height 630/275 mm, motor 5,5 kW, Tersa cutterblock, 2 pcs. table rollers in ribbed cast iron table,control panel with positioning control, infeed with ribbed steel roller,outfeed with 2 pcs rubber rollers, 0a9pc more details on the pictures or on request

Condition: ready for operation (used), Included in delivery: 01x L collision protection corner, used material color: yellow / black total height: approx. 400 mm leg dim.: approx. 170/100 x 170/100 mm total width: approx. 310 mm Ba3khn3afwk total depth: approx. 160 mm material thickness: approx. 5,00 mm Drill hole diameter: approx. 15 mm number/ drill holes: 04 pcs. Weight: approx. 4.570 kg | pcs. Remark: The collision protection corners have on both sides holes (03 pcs.) on both sides at a distance of 100 mm. of 100 mm. (Drill holeØ: 12 mm) General information about the article: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 1997, Face plate diameter 400 mmHeight 100 mm Bfxx7t0xu7

Condition: good (used), Year of construction: 1989, Hofmann thickness planer -510mm width -280mm height -Electric table height adjustment -2 feed speeds Izjw00p -4kW -Tersam blade planing shaft -2 rollers in the lower table -linked infeed roller -year of construction 1989 -2 rubberized pull-out rollers -numerical counter (planing thickness) -price net ex stock Haldensleben. -You will receive an invoice with VAT. -Delivery by forwarding agencies

Condition: good (used), Faceplate Diameter 400 mm Max 960U RPM rotating JAWS Cone diameter 106,39 mm PCD 133.4 mm 7av2bl2yr