Edgebander

Hebrock F5

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. Fpslholht Hwjcdw Eeh max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Main motor: 5.5 kW Stepless speed control: 2000 - 6000 rpm Scoring motor: 0.75 kW Saw blade diameter: max. 500 mm Electromotive height and swivel adjustment of the saw blade Folhjzab S Tocdw Ejph Screen control with touchscreen Control panel at eye level Double roller carriage: 3000 mm Parallel fence with electromotive adjustment Miter fence with electromotive adjustment of the fence flaps, manual angle adjustment with automatic length compensation, cutting length up to 3500 mm.

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper Folhcdwsi Anads Eeph F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil Fpelhcey Iw Nredw Esh - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h Fslhceuc U N Usdw Eoph SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: new, Year of construction: 2025, Edge Banding Machine F5 with PLC control (incl. 15" touchscreen), hot melt adhesive application to the workpiece for edge materials up to 3 mm: Joint trimming unit (incl. DIA tool) up to 2 mm trimming depth, maintenance-free glue pot with changeable pot setup, incl. adhesive discharge device, Fpslheh Hl Ayjcdw Eoh HF milling station with pneumatic adjustment, incl. corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), cleaning station, jointing head Whispercut, combination milling head, radius milling cutter R=2mm, radius corner milling cutter R=2mm, quick-change system for corner milling cutter, radius changeover motor R=1mm, multi-radius scraper R1/R2, undercarriage, spraying device for separating agent (PUR), spraying device for cleaning agent (PUR), pneumatic 3-point adjustment, LED lighting, INCLUDES 2nd interchangeable glue pot, max. edge thickness 3mm, workpiece thickness 8-50mm, min. workpiece length approx. 160mm, feed speed 10m/min, ready for operation in approx. 3.5 min, dimensions approx. 4300x1300x1400mm (LxWxH), weight approx. 900kg, extraction nozzle 1 x 140mm

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) Fjlhcdwewyu Rws Esph • Integrated LED workspace lighting

Condition: new, Type MB506C Fpolhcod Srkbodw Ejh Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED Folhsudaazjcdw Eoph 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Folhcdowwtz Now Esph Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Standard equipment Automatic filter shaker Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels