Rotary indexing table - Automatic polishing machine

HAU

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm Kjdpow Avptjfx Agredt The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. Kdedpfx Aow Au A Ejgrst The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Ksdpfx Ageyntrhsrjdt Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Three rotary table polishing machines are available.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Kjdpjh Ug Ulofx Agrjdt Rotary table with 6 working spindles and 3 polishing stations with high-pressure nozzles, 5.5 kW motors, control cabinet.

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Kdjdpfx Aoxxv D Hogret If you have any further questions, please feel free to contact us!

Year of construction: 1976, condition: ready for operation (used), machine/vehicle number: 12321, Hydraulic unit, consisting of an oil tank with a drive motor mounted on it with a flanged hydraulic pump and 2 valve blocks above it 1. valve block: Operating pressure 160 bar Delivery rate 20 l / min 2. valve block: Operating pressure 319 bar Kjdsghgtrjpfx Agredt Drive motor KATT: 220/380 V, 1420 rpm, 2.2 kW Required space: 700 x 620 x 1050 mm Weight: including hydraulic oil (90 l) 193 kg

Year of construction: 1970, condition: used, engine: 380 V, 5,5 kW Kdjdpfx Agj Sxmieret space needed: 1200 x 1600 x 3200 mm weight: 1200 kg

Year of construction: 1970, condition: used, Headstock can be manually adjusted transversely: 600 mm Spindle can be manually adjusted in height on the column: 1200 mm Hydraulic automatic vertical movement: 900 mm Kedpjb N Dgmefx Agrjdt Hydraulic automatic transverse movement: 200 mm Maximum distance between table and spindle mounting (long spindle): 600 mm Drive motor: 380 V, 2800 rpm, 5.5 kW Table diameter: 550 mm Space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t Hydraulic unit: 2.2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Year of construction: 1975, condition: good (used), machine/vehicle number: 12148, 2 hydraulic units Standing oil container with a hydraulic pump immersed in it and a flanged motor as well as 2 control blocks each with connection hoses Hydraulic pump: Maximum pressure: 55 bar Speed: 1500 rpm Hydraulic oil content approx .: 100 l Ksdpfx Aeghba Negredt

Condition: good (used), Indexing table HAU RK 4-800, 4 work piece spindles, max. 3 polishing units, more details and inspection on request. Pictuer shows RK 6/800 Kedpfov Na Sjx Agrsdt