Vertical machining center

DMG DMC 125U

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Bwodpfx As Ah Adisnqjw Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Bodpfx Aetr A Evjnqsww Number of axles: 3

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock Bwodpfx Anjzkbt Djqsw >10 pallets available

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 22,891 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Bwodpfsz E Rinex Anqow Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, functionality: fully functional, machine/vehicle number: 06860001401, Swing diameter: 320 mm Automatic workpiece feeder Chip conveyor High pressure cooling system with paper filter Bjdpfx Aek Ny R Donqjww The price contains the machine itself, the cost of unassembly and the loading on truck. Every other cost on your side.

Condition: like new (used), Year of construction: 2006, operating hours: 500 h, functionality: fully functional, Control unit: SIEMENS Sinumerik 840D Solutionsline Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: Bwsdpfey U Hw Ejx Anqew - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet The machine is located in our showroom and can be inspected under power. It has very little working hours since it was in a technical school's workshop.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Bwodsy T I U Aspfx Anqow Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Bwedpfx Aswrdu Aonqsw Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Year: 2017 Bwedps Af Ncwjfx Anqew Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Through spindle coolant Software options Under power ihnspection is available at anytime!

Condition: good (used), Year of construction: 2014, Spinner MVC1000 machining center, with 4.axis Year: 2014 Technical details: Travel X/Y/Z: 1000mm/500mm/570mm Table dimensions X/Y: 1200mm/500mm Max. workpiece weight: 800kg Distance from spindle nose to table: approx. 120-690mm Tool holder: SK40 Max. spindle speed: 10000rpm Tool magazine: 24 positions Max. tool diameter: approx. 80mm Max. tool length: approx. 300mm Max. tool weight: approx. 7kg Rapid traverse X/Y: 24m/min Rapid traverse Z: 20m/min Control: Heidenhain TNC 620 Space requirements X/Y/Z: approx. 2700mm/2550mm/2770mm Machine weight: 5100kg Accessories/options: - 4.axis rotary table - Blum measuring system ( touch probe is missing ) - documentations Bwodpfxsz Rvixs Anqsw - Swarf conveyor - Through spindle coolant - Coolant tank Under power in our warehouse, possible to test it anytime!