DMG MORI DMU 60 Monoblock
DMG MORI DMU 60 Monoblock

Name: DMG MORI DMU 60 Monoblock
Brand: DMG MORI
Availability: InStock

Year of construction

2007

Condition

Used

Location

Germany

DMG MORI DMU 60 Monoblock DMG MORI DMU 60 Monoblock

Show map

Machine data

Machine type:: DMG MORI DMU 60 Monoblock

Manufacturer:: DMG MORI

Model:: DMU 60 Monoblock

Year of construction:: 2007

Condition:: ready for operation (used)

Price & Location

Location:: , Germany

Call

Technical details

Travel distance X-axis:: 730 mm

Travel distance Y-axis:: 580 mm

Travel distance Z-axis:: 560 mm

Controller manufacturer:: HEIDENHAIN

Controller model:: iTNC 530 3D

Table load:: 500 kg

Spindle speed (max.):: 18,000 rpm

Spindle motor power:: 15,000 W

Number of axes:: 5

Details about the offer

Listing ID:: A215-33057

Reference number:: DE-MIL-DMG-2016-00010

Update:: 19.03.2026

Description

This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details.

• Working area / travel:
• Modification: X-axis travel reduced by 100 mm (effective X travel 630 mm)
• Main drive & spindle:
• Motor spindle SK40 with active cooling
• Power: 15 kW (40% duty) / 10 kW (100% continuous)
• Tooling system:
• Tool holder: SK40 (DIN 69871)
• Tool clamping: DIN 69872
• Tool changer: Pick-up system
• Magazine: 24 pockets (SK40)
• Work table:
• Integrated NC rotary table in rigid table
• Rotary table Ø 600 mm; total table 1,000 x 600 mm
• T-slots: 1x 14 H7 (alignment, centered) + 8x 14 H12 (clamping)
• T-slot spacing: 63 mm
• Permissible load: 500 kg
• Milling head:
• Controlled NC-swivel B-axis with hydraulic clamping
• Spindle offset: 100 mm
• Swivel range: -120° to +30°
• Control system:
• Electronic handwheel iTNC 530
• Control language: German
Bdsdpfx Aeyvfpbebbjb

Additional equipment

• Workpiece measurement: Heidenhain TS 640 infrared probe (SK40)
• Tool measurement: Blum laser (in-machine vertical tool length and diameter)
• Chip conveyor
• Flushing gun with pump (1 bar / 40 l/min theoretical capacity)
• Networking: DMG Netservice Basic Package Euro ISDN (Netservice Box, Cisco Euro ISDN Router, license)

Technical Specification
Taper Size SK 40

Seller

Registered since: 2017

1,388 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Iceland

7,824 km

DMG MORI DMU 60 MonoBlock
DMG MORIDMU 60 MonoBlock

Call

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe Bdsdpfxox D Iirs Abbob • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

See details

Listing

Milling machining centers - universal DMG DMU 50 eVo linear

Hattingen

7,668 km

Milling machining centers - universal
DMGDMU 50 eVo linear

Call

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 Bedpfx Aoyvkuqjbbsdb tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

See details

Listing

Machining center 5-axis Deckel Maho DMU 50 M TNC 124

Burgoberbach

8,004 km

Machining center 5-axis
Deckel MahoDMU 50 M TNC 124

Call

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Bdsdpfx Asu Unh Iobbsb For further information or contact options, please visit our website

See details

Listing

Universal machining center DECKEL MAHO DMU 80 P hi-dyn

Aach

7,993 km

Universal machining center
DECKEL MAHODMU 80 P hi-dyn

Call

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Bsdpoym Rnkefx Abbsdb Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

See details

Listing

COMPLETE SHREDDING LINE on stock 3E-GrabTrade COMPLETE SHREDDING LINE

Częstochowa

8,375 km

COMPLETE SHREDDING LINE on stock
3E-GrabTradeCOMPLETE SHREDDING LINE

Call

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30Kw, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor -big bag station for two bags Bedpfx Ajv I T E Djbbjdb

See details

Listing

Wölzing-Fischering

8,422 km

Universal machining center
DMGDMU 70

Call

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: 840D, rotary table diameter: 800 mm, spindle speed (max.): 14,000 rpm, coolant supply: 20 bar, input voltage: 400 V, DMU 70 3+2 axes The machine is currently being overhauled. New spindle New Y & Z axis guides Bellows Inspection windows Measured with BallBar incl. protocol Siemens 840D with Shopmill - handwheel 14,000 rpm SK40 spindle 30-position tool changer Internal coolant 20 bar Bdodpfxeyx Am Rs Abbeb Tank system with band filter 600 l Chip conveyor Cabin roof Measuring probe Rinse gun Operating mode 4 Documentation Available from 04/2026

See details

Listing

France

7,824 km

Hurco VM30I
HurcoVM30I

Call

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,800 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM30I was manufactured in 2019. It features a table size of 1320 × 508 mm and a maximum table load of 1,800 kg. With an impressive X travel of 1270 mm, Y travel of 508 mm, and Z travel of 508 mm, this vertical machining centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Hurco VM30I vertical machining centre. Contact us for further details. • Table size: 1320 × 508 mm • T-slot size: 5 × 18 mm • Max spindle torque: 82.3 Nm @ 1740 rpm • Tool changer: 24-position random arm ATC • Max tool diameter: 80 mm • Max tool length: 250 mm • Rapid traverse: 28 m/min • Through-spindle coolant: 20 bar • Spindle chiller • Control: WINMAX 5 CNC with dual screens • Air-conditioned electrical cabinet • Electronic handwheel • RJ45 & USB ports • 3-color status light • Coolant and air guns • Dimensions: 4100 × 2500 (3300) × 2550 mm • Condition: Excellent Additional equipment • Screw chip conveyor • Machine vise Bdedjyq Nz Ropfx Abbob • Set of tool holders • 3D probe • Documentation (CD-ROM) Technical Specification Taper Size BT 40

See details

Listing

France

7,824 km

Hurco VMX30i
HurcoVMX30i

Call

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,112 h, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VMX30i vertical machining centre was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, Y-axis travel of 510 mm, and Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX30i machine we have for sale. Contact us for further details. • Control: WINMAX (MAX 5), dual-screen Bdedpsyufcfefx Abbsb • Table size: 1020 × 510 mm • Tool changer: 30 positions • Design: New design Additional equipment • Chip conveyor • Water cooling system • Main spindle cooling • Full machine enclosure / chip protection guard • Machine work light • Machine base • Machine status indicator • DXF option • ULTIMONITOR Ethernet Kit • Materials and Tools Library • WINMAX PC Software • External spindle blower

See details

Listing

Universal milling machine, conventional milling machine, conventional milling bench MAHO MH 700 P

Hessisch Lichtenau

7,826 km

Universal milling machine, conventional milling machine, conventional milling bench
MAHOMH 700 P

€8,800

Fixed price plus VAT

Call

Condition: used, NC universal tool milling machine MAHO type MH 700 P with HEIDENHAIN TNC 121 linear control . 71247 Circuit diagram no. ET 226 Built in 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 500 mm Spindle mount ISO 40 Spindle speed 40-2000 rpm, 18 steps Feed rate X, Z-axis 1 - 600 mm/min, continuously variable Feed rate Y 1 - 300 mm/min, continuously variable Rapid traverse X, Z-axis 1.5 m/min Rapid traverse Y-axis 0.75 m/min Vertical spindle travel 80 mm Horizontal spindle travel 80 mm Spindle drive 4 kW Power supply 380 V, 50 Hz, 10 kW Bsdewd Szbjpfx Abbjdb - HEIDENHAIN TNC 121 NC linear control - Vertical milling head with automatic Quill feed - Hydro-mechanical tool clamping - Coolant system in the machine base - Universal built-in rotary table, swiveling and tilting via threaded spindles +/- 30° - Universal built-in rotary table with manual transverse adjustment of 200 mm - Universal built-in rotary table with 360° rotation function and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via hole plate 1:120 = 1 rev = 3° - Pivoting control panel - Central lubrication system - Electrical diagram Space requirement L x W x H 2000 x 1650 x 2250 mm Weight approx. 2800 kg Good condition

See details

Listing

Two shots injection molding machine ENGEL e-Motion 740H / 50MV / 420 T Combi US

Orlando

1,644 km

Two shots injection molding machine
ENGELe-Motion 740H / 50MV / 420 T Combi US

$175,000

EXW ONO plus VAT

Call

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Bodpjx Szwhjfx Abbsdb Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

See details

Advertise here