DMG MORI DMU 50 3rd gen

DMG MORI DMU 50 3rd gen

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° Bodpfjzipzyox Ammsdg number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table Bjdpfozdf Hvjx Ammjdg - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Bdedjxbzyropfx Ammog

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 1,600 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 90 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,000 kg, total height: 3,600 mm, total length: 8,017 mm, total width: 4,905 mm, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, rotational speed (max.): 10 rpm, overall weight: 35,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, spindle nose: HSK63A, number of slots in tool magazine: 60, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Equipped with: - 5 axes - Automatic pallet changer system Bedpfozgbdzex Ammjdg - High-pressure coolant system running through the spindle with paper filter and 1000-liter tank - Automatic tool presetting system by BLUM - CE marking

Condition: ready for operation (used), Year of construction: 2018, Universal Machine Center 5 axis simultaneous Bdsdpfszvlglex Ammjg DMG DMU 50 Year 2018 Travel X500 Y450 Z400mm Heidehhain iTNC530 Swivel Rotary Table Ø630x500mm NC B axis -5 to 110 degree NC C axis 360 degree x 0.001 Spindle 18,000 rpm ATC 16, SK40 taper Direct Measuring X,Y & Z axis Electronic Handwheel

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 17,000 rpm - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: Bjdpsylnq Tjfx Ammodg - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console

Condition: good (used), DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 - 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range: +/- 120° Rotary range: 360° T-slots: 600 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent tool pocket: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip-to-chip time: 8.0 sec Feed rates: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 - 40,000 mm/min Total power consumption: 24 kVA Machine weight (approx.): 11.5 t Space requirement (approx.): 4.5 x 3.5 x 2.3 m Documentation Coolant system Electric handwheel Bedszqddxjpfx Ammsdg Laser head: 100 watts Laser hour meter: 6177 h / 2802 h Machine hour meter: 18703 h / 4738 h