Vertical machining center

DMG MORI DMC1150V

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model TNC 640 Dwsdpfxex D N Rke Aduof Main Drive Spindle speed range 20 - 14000 Tool taper ISO40/SK40 DIN69871 Number of axis 3 Movement X-Axis Movement 1150 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 1460 mm Outer width 750 mm Additional Equipment Infrared touch probe Make: Renishaw PP 60 optical (OMP 60) Tool length and diameter measurement Automatic cleaning of tool holders using an air jet Tool cone calibration equipment Safety package for power supply failure Overvoltage limiter Undervoltage monitoring with rapid braking activation Electronic handwheel Chip extractor (chip scraper) This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Dwsdpfx Adevvww Teujf Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Good condition

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. Dwedpfx Aemmfwujdujf We are also happy to offer you commissioning and training

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Dwsdswh Ri Espfx Aduef Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: ready for operation (used), overall weight: 188 kg, Keyence Agilista 3D printer 3110W incl. rinsing tank and accessories Technical data: Model: AGILISTA-3110W Printing material: AR-M2 (transparent printing material) Support material: AR-S1 (water-soluble support material) Installation space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) Resolution: 635 × 400 dpi Dwjdoryxltjpfx Aduef Layer thickness: High resolution 15 µm Normal resolution 20 µm Mains connection: Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption: Max. 750 VA Interface: Ethernet 10BASE-T / 100BASE-TX Operation: Interactive color touch panel Supported operating system: Windows 10 64/32 bit, Windows 8/8.1 64/32 bit, Windows 7 64/32 bit, Windows Vista 64/32 bit *1 File format of the CAD data: STL file Dimensions: W 944 × D 700 × H 1360 mm Ambient resistance: Ambient temperature +18 to +25 °C Relative humidity 30 to 70 % RH Weight: 188 kg

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. Dwjdpfx Asu Id H Aedujf The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x stacking box, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Dodpshm Slljfx Adujwf Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) Dsdpfx Adeuif Izouewf + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.