CNC - Machining center

DMG MORI DMC 850 V

Condition: used, Year of construction: 2018, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpm Movement X/Y/Z : 850/520/475 mm Tool holder : HSK 63 In General: Year of manufacture:2018 Control system:Siemens 840 Dsl – Operate Travel ranges X/Y/Z:850/520/475 mm Speed:20,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:20,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 Fluid supply:Coolant + blast air Working table: Clamping area:1,160 x 570 mm Max. table load:1,000 kg Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool diameter:80 (130) mm Max. tool length:300 mm Equipment: Positioning sensors:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Renishaw Touch probe Tool measurement:Tool setter Emulsion mist separator:Mechanical Pjdpfx Ajz A Nz Roppogt Tool coding:Balluf sensor

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Pgjdpfx Asy Uvhysppst Width:800mm Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Pgodpoznniajfx Appet Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000 Pgsdpfx Apst Akgwspet

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Pjdpfxjpkyn Ro Appjgt Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Pgodpfx Aerzq Arjppot Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double miter Pgjdpfxsh Razfs Appjt – Hydraulically adjustable saw pressure – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: used, Manufacturer: HERMLE Model: C 40 U dynamic Machine type: 5-axis universal CNC machining center Year of construction: 2006 Machine No.: 1XXXX Control system: SIEMENS SINUMERIK 840 D Condition: extremely good / exceptionally well-maintained CE marking: available Original HERMLE documentation: available Travel ranges X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Dynamic feed drive Rapid traverse X/Y/Z: 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Dynamic feed spindles X-axis: Ø 40 / 20 mm Y-axis: Ø 50 / 40 mm Z-axis: Ø 40 / 30 mm Main spindle Spindle speed: 18,000 rpm Tool interface: HSK A63 Internal coolant supply: 80 bar Compressed air through the spindle center Tool magazine Tool positions: 38 Tool interface: HSK A63 Automatic tool changer NC swivel rotary table Table type: SRT 800 Table diameter: Ø 800 mm Maximum table load: 1,400 kg A-axis total range: 135° A-axis: minus 110° to plus 25° C-axis: 360° 6-fold rotary through-feed Parallel T-slots: 14 H7 Measuring system / Accuracy Direct linear measuring system X/Y/Z Resolution: 0.1 µm Input unit: 0.1 µm Display increment: 0.1 µm Position tolerance Tp X/Y/Z according to VDI/DGQ 3441: 0.008 mm RENISHAW measuring probe 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS Coolant and chip disposal system Internal coolant supply: 80 bar KNOLL high-pressure coolant system KNOLL filter system Scraper conveyor Chip flushing gun Chip cart: 200 liters Compressed air through the spindle center Oil mist extraction KNOLL KF 200/1000 Manufacturer: KNOLL Maschinenbau Type: KF 200/1000 Year of construction: 2006 KNOLL 850 K 1 Year of construction: 2006 Equipment NC swivel rotary table Ø 800 mm RENISHAW measuring probe Direct linear measuring systems X/Y/Z 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS 6-fold rotary through-feed Internal coolant supply 80 bar KNOLL coolant and filter system Scraper conveyor for chips Chip cart 200 liters Compressed air through the spindle center Chip flushing gun Oil mist extraction Manual cabinet door Manual cabinet roof Laminated safety glass panes Machine lighting German documentation Original HERMLE machine documents CE declaration of conformity NAS acceptance test in customer's plant Pgjdpfsz E Axhex Appot Electrical data Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Control voltage: 24 V DC Total rated current: 63 A Total connected power: 43 kVA Connection cable cross-section: 16 mm² Minimum short-circuit strength of the power grid: 2.50 MVA IKZ electrical data Connection: 400 V / 3 PH / 50 Hz Control voltage: 24 V DC Fusing: 50 A Cable cross-section: 10 mm² Connected load: max. 16.6 kVA Dimensions / Weight Net weight according to nameplate: 10,500 kg Transport weight standard machine: approx. 10,300 kg Transport length: approx. 3,154 mm Transport width: approx. 2,354 mm Transport height standard: approx. 2,892 mm Transport height with Z motor removed: approx. 2,743 mm Transport height with Z motor and energy chain removed: approx. 2,640 mm Control cabinet cooling Manufacturer: RITTAL Type: Blue e+ SK 3185830 Year of construction / Production date: 2025 Cooling capacity: 1.60 kW Power consumption: 0.70 kW Temperature range: minus 20 to plus 60 °C Protection class internal circuit: IP55 Condition The machine is in extremely good and exceptionally well-maintained condition. Extensive original documentation and machine configuration available.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: Pgodpfxjv T Nqas Appjt - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Psdpounwd Tefx Appjgt Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.