Sorting belt paddle ejector

DIMTER

Year of construction: 2007, condition: ready for operation (used), This 3-axis WEINIG / DIMTER Unirex 2000 SPB was manufactured in 2007. It features a total power of 45 kW and operates at a nominal current of 110 A. The machine is part of a comprehensive wood production line, including a drilling and milling center, tenon cutting machine, and longitudinal profiling machine. If you are looking to get high-quality wood processing capabilities, consider the WEINIG / DIMTER Unirex 2000 SPB machine we have for sale. Contact us for further details. • Operating voltage: 3 × 400 V Gedpfsyzqywox Afzeir • Frequency: 50 Hz • Control voltage: 230 V • Control circuit voltage: 24 V • Nominal current: 110 A • Main fuse: 125 A • Total power: 45 kW • Electrical diagram: FM 1492 • Production line type: UC-Matic / Hama • Included machines: • Unirex 2000 SPB drilling and milling center • Unitec 15 tenon cutting machine • Univar 12 longitudinal profiling machine Additional equipment • Cross conveyors and side handling systems (as shown in the pictures)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GRECON Ultra automatic finger jointing line Year of manufacture: 2003 Technical condition: very good, machine regularly serviced Technical data: • input workpiece length: 150–1000 mm • timber width: 40–205 mm • timber thickness: 20–80 mm • output / pressing length: 6100 mm • pressing force: 120 kN / 12 t • max. cross-section for 10/11 mm finger joints in softwood: 100 cm² • max. cross-section for 10/11 mm finger joints in hardwood: 80 cm² Performance: • vertical finger-jointing: • Ultra: 15.2 m/min Equipment / design: Giodpfxsy Amk Uj Afzor • 600 mm wide package milling unit • manual turning table • automatic turning of material and transfer to the press • the machine operates in a fully automatic cycle • 1 operator required Possibility of professional dismantling, assembly, commissioning, and operator training for the machine.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Giodpfow Sy T Hex Afzsr Storage location: Nattheim

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Total length: 15,50m Gsdot Ir Nqepfx Afzsir Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Grecon Dimter OptiCut 304R Optimizer Minimum input wood length: 900 mm (with cross chain infeed) Wood width min./max.: 40-200 mm Gijdpfx Aoyxltyofzsr Wood thickness min./max.: 15-80 mm Lowering, cutting, and acceleration time: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Max. wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade speed: 4200 rpm Max. feed speed: 170 m/min Outfeed belt conveyor with 6 pushers Cutting modes: 1. Fixed length cutting 2. Board length optimization for maximum output 3. Defect removal with chalk marking Total line length: 21 m Year of manufacture: 2000

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Giedpfx Aeyngniofzjr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Gijdpfx Aeyxwyrjfzer Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video

Condition: ready for operation (used), functionality: fully functional, Roller conveyor Length: 7500 mm Width: 600 mm Godpjyxmb Eefx Afzoir Height: 1700 mm

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm Gisdpfxeyhggro Afzer • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m Gsdoyvgiaopfx Afzsir - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants