Vertical machining center

Deckel Maho DMC 100 V

Condition: used, Year of construction: 2001, x-travel 1000 mm Nedpfx Apeztfx Ashowl y-travel 800 mm z-travel 500 mm control Siemens 611

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 341 kg, input voltage: 400 V, total width: 780 mm, total length: 1,870 mm, total height: 1,450 mm, warranty duration: 12 months, Aircooled chiller MTA TAE EVO TECH 081 22 KW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank. Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D, expansion vessel, buffer tank. Dimensions: 1.87x0.78x1.45 m. Weight: 341 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Nwsdpfx Aoxwcafophjl The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Equipment: Heidenhain CNC control Tool changer SK40 tool holder Renishaw measuring probe Coolant system Chip conveyor Condition: Nodpfxozh Hxme Aphewl Used Machine is complete Inspection under power possible by arrangement.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Nwsdpjx Elxijfx Aphel Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: used, Year of construction: 2009, Compressor 2: Air compressor, make CompAir, type: DH75HSR-10W, 75 kW, bloc compressor 2S7, volume rate of flow 11,9 m³/min, 10 bar, suction pressure 1 bar, 3.700 U/min, built 2009 also: Air compressor, make Bellis Morcom, type: WH50 H3N, stroke 165-1 mm, 750 rpm max, 540 kW, 45 barG, built 1999. Nwedpfx Apog D Rbqshel Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 € Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 €

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. Nedpfx Aovx N Shophjwl The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Nsdpfx Aozhwg Uophowl Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Nwjdpfx Aszg Shqsphel Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-C2 12kW / VF1530-12000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m Nwsdpfx Asphpf Nsphjl - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 12.0kW - Energy requirements: 73.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 35.0mm, maximum thickness 35.0mm - Stainless steel: Recommended thickness 25.0mm, maximum thickness 25.0mm - Aluminum: Recommended thickness 18.0mm, maximum thickness 18.0mm - Brass: recommended thickness 18.0mm, maximum thickness 18.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2017, operating hours: 38,141 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 35 rpm, operating hours of spindle: 8,074 h, coolant supply: 30 bar, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with Nsdezy Nxgjpfx Aphjwl - Chip conveyor belt right - Cooling by the spindle 15 bar - Spindle total time 8.074 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.