Used lowboy semi-trailers / low loaders for sale (195)

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, empty load weight: 10,600 kg, maximum load weight: 22,500 kg, overall weight: 33,100 kg, axle configuration: 3 axles, first registration: 12/1984, loading space length: 11,900 mm, loading space width: 2,730 mm, loading space height: 950 mm, suspension: steel, tire size: 7.50R15, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, SAF axles, leaf spring suspension, lashing points, 2-part loading ramps, mechanical ramps, side aluminum fender, supports, twin tires. Superstructure: 3-axle semi-trailer with 2-part mechanical loading ramps. Loading length of the lower platform approximately 8900 mm! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Cedpfx Agei Rp A Noterg

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. Crsdpfoxxkqzsx Agteg - .

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total length: 14,200 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Crsdoxwa Uyspfx Agtog All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, empty load weight: 6,600 kg, maximum load weight: 23,400 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 09/1991, loading space length: 10,200 mm, loading space width: 2,430 mm, loading space height: 2,900 mm, suspension: steel, tire size: 9.5R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, leaf spring suspension, lashing points, hydraulic ramps, rear support, supports, twin tires. Superstructure: 2-axle low-bed trailer with fixed walls, tarpaulin, and continuous hydraulic loading ramp. Loading height approx. 950mm! Tire condition approx. 40-70%! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Credpfxji Rk U Ho Agtog

Condition: used, empty load weight: 7,800 kg, maximum load weight: 21,200 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/1968, loading space length: 12,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, leaf spring suspension, extendable to 3m, hydraulic ramps, dual tires. Credpfxsi Rnwwj Agteg Body: Hydraulic ramps. Length over axles approximately: 8200mm, length over kingpin: 3200mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10-ton axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading area length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable, 25,000 kg, pneumatic valve for adjusting the No. 4 wheel chocks, electric winch with remote control, 3x2 tie-down points in the platform outer frame (8 tons), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers for the loading platform, extendable bumper, ramp holder. Cedpfx Agoih E Hystjrg

Condition: used, maximum load weight: 31,240 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 05/2024, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt from Equipment Specifications: Detachable gooseneck with external main frame: Hydraulically detachable gooseneck with external main frame, featuring integrated steering linkage and individually operated lowering cylinders. Integrated hydraulic cylinders and support arms for lifting and lowering the low-bed (mounting on the truck required). Line connections to the low-bed are mounted internally on the main frame in the curved section. Kingpin 2 inches. Mounting for locking pin. Ladder with handrail for safe access. All valves and distribution boxes are easily accessible and covered with aluminum plates. 1 pair of plastic shims for the low-bed, mounted on the side. Multiple hydraulic couplings for easy disconnection of the hydraulic lines. Gooseneck load securing: 2 pairs of recesses for attaching hooks, approximately 2000 daN lashing force. 1 pair of pivoting lashing eyes, approximately 13400 daN lashing force, mounted on the bottom of the support arm. 3 pairs of M16 threaded holes for screwing in lashing points, approximately 2000 daN lashing force, in the open outer frame. Central lubrication system / front bogie: Installation of a BekaMax progressive central lubrication system with a separate pump in the gooseneck. Optimally controlled via the DOLL tronic. Filled with a specially developed grease that has proven its reliability over many years. This covers the low-temperature range and prevents residues from mineral greases in the distributors. Cedpfxozr A Sde Agtorg DOLL tronic - CAN bus system with keypads: The innovative DOLL tronic control concept allows all trailer functions to be easily and safely operated via various control panels (keypads) on the trailer. Control is via a decentralized computer-controlled CAN bus system. The control panels (keypads) are located on the front side of the gooseneck and at the rear. The functions of steering, lane keeping, suspension and central lubrication can be operated from both control panels. In addition, the functions of the detachable gooseneck can be operated on the gooseneck. The feedback of the ride height is displayed via LEDs in the keypads. Green: basic ride height, blue: upper ride level, blue flashing: above the permissible ride level, yellow: lower ride level, yellow flashing: below the permissible ride level. Ride level can be adjusted steplessly within the permitted range. Automatic synchronization when both sides are actuated. Repeater: For reliable data transmission to the EBS modulator with long cable lengths. Sockets at the front: 15-pin socket on the front cross member for lighting. 7-pin socket on the front cross member for EBS. 10-pin socket on the front cross member for control. 2-pin power socket for power supply. LED work lights on the gooseneck: 2 x 1800 lumens, for illuminating the low-bed during loading and unloading in the dark. Without connection cables to the truck Front overhang approximately 1,110 mm, front cross member angled: Overhang screwed to the kingpin plate. Approximately 40° angled corners. Slip plate extending forward to protect the line connections. Low-bed in flatbed design: Flatbed frame is telescopic. Frame pre-tension adjusted for the maximum payload, reduced payload in the telescopic positions. The last telescopic stage may only be used in conjunction with container transport. The outside is designed as an open U-shape. Prepared for the attachment of load area extensions. Telescopic stages approximately every 500 mm + container positions. Low-bed l

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame Codpfx Aslthgujgtorg * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, maximum load weight: 31,000 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer with trailing axles New vehicle, first registration June 30, 2026 Unladen weight 13,950 kg Permissible total weight (technical) 45,000 kg Gooseneck length 3,070 mm Saddle height 1,200 to 1,280 mm Swivel radius 2,350 mm Low-bed length 6,800 mm Telescopic extension length 5,700 mm Cedszmqmxopfx Agtorg Rear axle bogie length 2,700 mm Width of excavator arm recess 700 mm Depth of excavator arm recess 550 mm Loading height of low-bed 300 mm Loading height above the chassis 955 mm Width of the semi-trailer 2,550 mm Hydraulic suspension -70 / + 530 mm Technical maximum saddle load 21,000 kg Axle load 24,000 kg Detachable gooseneck with external main frame Painting of the semi-trailer in 3 layers including hot-dip galvanizing Doll Tronic CAN-bus system Floor in the low-bed: 45 mm spruce wood planks between the flatbed frames 24-volt E-hydraulic system Control of trailer functions with DOLL keypads on the gooseneck AUXILIARY STEERING with REMOTE CONTROL EEG electronic single-lane guidance during straight-line driving LaSi in the low-bed: 7 pairs of swivelable lashing points, 13,400 daN lashing force 5 pairs of frame pockets in the outer frame 3 pairs of M36 threads externally for screwing in lashing brackets DOLL tera chassis with trailing axles and hydraulically suspended BPW axles All axles are hydraulically steered with a maximum steering angle of 60° on the last axle All lubrication points are connected to the central lubrication system WABCO trailer EBS with ABS and RSS Aluminum air tank BEKA-MAX central lubrication system on the front and rear units Overwidth package with foldable loading area extensions 2x 225 mm, extendable warning sign package up to 3,200 mm width Tires 8x 245/70 R 17.5 RENTING is the new BUYING, with us, also available in full-service rental IMMEDIATELY-----

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low loader / low-bed trailer in full specification First registration 05/2025, brand new vehicle Overall length: 13,065 to 17,565 mm (simple telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Rear axle assembly length: 2,765 mm Loading height on rear axle assembly: only 845 mm LOADING HEIGHT LOW-BED: only approx. 300 mm (loaded) Technical gross weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis with 3-coat paintwork Detachable gooseneck with external main frame Central lubrication system for front carriage and an additional unit for rear carriage All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric-hydraulic system, 24 volt Oversize package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 FT or 20 FT containers Drop-side body on saddle platform Ramps for accessing the low-bed platform 5 pairs of swivelling lashing rings, each rated at 10,000 daN lashing capacity in the low-bed section 4 pairs of stake pockets in the outer frame Crjdpfxjw A Ekmj Agtog 3 pairs of swivelling lashing rings on the rear carriage 1 pair of lashing rings in the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for rent or full-service leasing.

Condition: used, maximum load weight: 22,620 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 08/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, total length: 13,600 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 2-Axle Truck Transporter Semi-Trailer Crsdpfjzwa Tvsx Agtsg for the transport of 2 small construction machines (SZM) or one truck --New vehicle-- Permissible total weight: 32,500 kg Unladen weight: 9,880 kg External width: 2,545 mm Overall length: 13,600 mm Saddle height: 980 mm Hydraulic lift platform, completely enclosed Wheel recesses Hydraulic winch with 6,700 kg static pulling force, with radio remote control 24-volt electric hydraulic system ROR axles with drum brakes Tires: 8 x 205/65 R 17.5 Continental 2nd axle with trailing steering KNORR trailer EBS Hydraulically adjustable and tiltable loading ramps at the rear Loading angle: 11° Mechanically extendable rear underrun protection Complete trailer hot-dip galvanized, side panels painted in RAL 9005 RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Crodpfx Agozqiiasteg Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, overall weight: 43,500 kg, axle configuration: > 3 axles, Year of construction: 2025, Equipment: ABS, GVN 4GVN O4 OVERWIDTH FLATBED KOC LIFT HYDRAULIC RAMP ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT SPECIFICATIONS AND BODY * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER NECK * STORAGE BOXES ON BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOAD AREA ON NECK * EXTENDABLE PANEL FOR OVERWIDTH LOADS * OVERWIDTH THRESHOLDS * WARNING SIGN FOR OVERWIDTH (4X) * TIE-DOWN POINTS * ADDITIONAL SUPPORTS * FIXED HYDRAULIC LOADING RAMPS * POWER CONNECTION FOR HYDRAULIC RAMPS * TRAILER LIGHT SYSTEMS * PRESSURE INDICATOR ----CHASSIS AND AXLES * OSMAN KOC AXLES, IDENTICAL TO BPW AXLES * 4 AXLES * LIFT AXLE (1ST AXLE) * LAST AXLE STEERABLE AND LOCKABLE * FULL AIR SUSPENSION * DRUM BRAKES * WABCO BRAKING SYSTEM ----TYRES * ALL TYRES * 235/75 R17.5 ----DIMENSIONS * LOAD SPACE DIMENSIONS * 9.55 M LENGTH x 2.55 M WIDTH (3 M WIDTH FOR OVERWIDTH LOADS) * LENGTH OF LOADING RAMP * 3.23 M LENGTH x 0.75 M WIDTH * LOAD SPACE DIMENSIONS OVER NECK * 1.8 M LENGTH x 2.4 M WIDTH * NECK HEIGHT FROM GROUND * 1.4 M HEIGHT * LOAD AREA HEIGHT FROM GROUND * 0.9 M HEIGHT * OVERALL LENGTH WITHOUT RAMPS * 13.6 M LENGTH ----READY FOR IMMEDIATE OPERATION ----EXPORT SALES ONLY WITH DEPOSIT OF MIN. €500 - €2,000 ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER). 5-DAY, 30-DAY PLATES AND 17-21 DAY AUSTRIAN PLATES (EURO 1) VEHICLE RESERVATIONS EXCLUSIVELY VIA E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 is required. Cjdpfx Agjxpzr Dstsrg Modifications, errors and prior sale are subject to change! More vehicles available on our website: Sale is made exclusively under our General Terms and Conditions – see website. Important Note – Important Information: Despite careful inspection of all details in our offer, errors may occur. Some of these may be caused by transmission errors in the systems of different platform providers. Therefore, we point out that all details are without guarantee and no legal claim can be derived therefrom. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. All information provided here is without guarantee and does not constitute warranted characteristics.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Credpfx Aszx Tctjgtjg

Condition: used, empty load weight: 12,200 kg, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, R17,5 * Tire sizes: 235/75 R17,5 * hydr 26t loading ramp * Remote control for loading ramp * Rear-steering axle * Saddle height 1250mm * Low-bed length incl. slope 9200mm * Gooseneck length 4300mm * Internal height low-bed 3050mm * Loading height low-bed 920mm * Rear outrigger extension 400mm each * Fifth wheel plate with interchangeable kingpin * 30mm Omega floor * 24t support * Axle load detection in the truck * Tire pressure monitoring * Extendable warning signs * 10-year warranty against rust * Upon request, we will gladly send you a video * Further pictures and a construction description Cjdezhfu Tspfx Agtsrg Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: new, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, front wall approx. 800 mm high, 14 x stanchion pockets in the outer frame, 8 x stanchions, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpozyganofx Agtsrg

Condition: new, overall weight: 58,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, OTHER GÜVEN LOWLOADER? HYDRAULIC RAMPS? STEERABLE AXLE? OVERWIDTH DEVICE? ----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERABLE AXLE? HYDRAULIC RAMPS? ADJUSTABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER, OUR OWN PRODUCTION FROM TURKEY * AXLE DESIGN * TRI-AXLE * THIRD AXLE WITH STEERABLE AXLE * WITH LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKE * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWLOADER, 6 M LONG * KING PIN ADJUSTABLE, 22 T DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M * FROM RAMPS TO KING PIN: 12.10 M * EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY ADJUSTABLE TO THE LEFT AND RIGHT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING POINTS * OVERWIDTH EQUIPMENT * TOOLBOX TIRES * TIRE SIZE: 235/75 R17.5 * DUAL TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 58,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL PERMISSIBLE TOTAL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY MANUFACTURED DESCRIPTION GVN TRI-AXLE LOWLOADER WITH LIFT AXLE AND STEERABLE AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS, OVERWIDTH EQUIPMENT, AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY LOAD TRANSPORT.----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least 500.00 ¤ / 1,000.00 ¤ will be charged. Codpoylfmfofx Agtsrg Subject to changes, errors and prior sale! You can find more vehicles on our homepage: Sales are made exclusively according to our general terms and conditions - see homepage. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Credezx Tcmspfx Agtjg

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg Cjdpoyrkpxsfx Agterg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: new, empty load weight: 8,700 kg, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | KRONE SD DA05 Refrigerated Trailer | Carrier Vector HE 19 Austria Edition #02/50 | Krone axles with disc brakes | Tool box | Temperature recorder | Electrical connection | Spare wheel holder | Pallet box | Meat cooler | Lift axle | New vehicle | Subject to errors, input errors, and prior sale. Crjdpfx Agozpbuxotsg

Condition: new, empty load weight: 12 kg, maximum load weight: 54,000 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 13,150 mm, loading space width: 2,950 mm, loading space height: 950 mm, total length: 13,700 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2012, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be raised, lift and lower function, ABS (anti-lock braking system), extendable to 3.50 m, lashing eyes, two-part loading ramps, hydraulic ramps, twin tires. Cjdei Rnh Topfx Agtorg Approx. 8500mm loading length over axles, loading length over kingpin approx. 4650mm, two-part hydraulic loading ramps 2500mm + 1500mm, extendable to 3.5 m, rear axle load (kg) 48000 (3 x 16,000 kg), 18,000 kg saddle pressure for 3-axle tractor unit, for EXPORT only, ONLY FOR EXPORT. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, headboard, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Crsdpfx Agjzxcy Usteg

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SDP 27 step semi-trailer with spreader tail immediately available Photos of the spreader tail to follow shortly * Fifth wheel height unloaded: 1,180 mm * Multilock external frame, universal load securing option every 100 mm * for loading space length: 13,620 mm i. L. Low bed 9,610 mm / platform 4,010 mm, loading space width 2,480 mm i. L. * 3 axles, each with a load capacity of 9,000 kg * Wheelbase: 1,310 / 1,310 mm * BPW unit with air suspension * Brake drums, 300 x 200 mm (for 17.5" rim) * Fully automatic electronic lifting axle control for 1st axle, depending on load * Air suspension with lifting and lowering device, including automatic ride height reset * 12-fold tires, 235/75 R 17.5 * Multifunctional rear lights (full LED) * Incl. 1 reversing light * 2 additional LED reversing lights * 1 toolbox, plastic 650x490x450 mm * 1 additional toolbox, plastic * Combination: truck-mounted forklift / hydraulic rear extension * 30 mm thick, waterproof plate floor, for floor loads up to max. 7,000 kg forklift axle load * hydraulic lifting roof with 500 mm total lift * Certificate for load securing in accordance with EN 12642 Code XL * Certificate for load securing for beverage transport (VDI 2700 Sheet 12) * Steel parts blasted, KTL primed with zinc phosphate coating and powder coated * Chassis including outer frame RAL 9005 DEEP BLACK Crodpfx Astrib Ejgtog * Tarpaulin color RAL 9006 WHITE ALUMINUM * Structure (front wall, rear portal, rear wall) RAL 7035 LIGHT GRAY We are happy to provide you with further information

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-suspended with lift axle, axle load gauge for axle load, high-bed length approximately 4,400 mm including slope, low-bed length approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for traversing on the gooseneck, additional options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, -- errors, omissions and changes excepted, sample images --, more data available at: !, More Details: ! Crsdszw Amlepfx Agtjg