Used lowboy semi-trailers / low loaders for sale (197)

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) Isdpfoxarmajx Af Usat * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck Iodew Tgp Depfx Af Ueat * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, empty load weight: 8,785 kg, overall weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,311 mm, loading space width: 2,500 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 14,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone Cool Liner Multitemp deep-freeze semi-trailer – New vehicle | Double-deck without beams – beams available on request | Floral width, lift axle | Krone axles with disc brakes | Toolbox | Spare wheel holder | ThermoKing SLXi refrigeration unit | Tyres: 385/65 R22.5 | Diesel hours: 3h | Semi-trailer from current production! Multiple units available | Subject to errors, input mistakes and prior sale. Iasdpfx Afoyi S R Ej Uet

Condition: used, maximum load weight: 34,500 kg, overall weight: 50,000 kg, axle configuration: 2 axles, first registration: 05/2025, next inspection (TÜV): 05/2026, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 320 mm, Year of construction: 2025, Equipment: ABS, 2-axle low loader / low-bed trailer in full specification First registration 05/2025, brand new vehicle Overall length: 13,065 to 17,565 mm (simple telescopic extension 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Extended low-bed length: 11,150 mm Gooseneck length: 3,650 mm Iaedpfxsw A Ekmo Af Ust Rear axle assembly length: 2,765 mm Loading height on rear axle assembly: only 845 mm LOADING HEIGHT LOW-BED: only approx. 300 mm (loaded) Technical gross weight: 50,000 kg Technical fifth wheel load: up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis with 3-coat paintwork Detachable gooseneck with external main frame Central lubrication system for front carriage and an additional unit for rear carriage All axles with hydraulic forced steering GIGANT axles with drum brakes WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Tyres: 9x 245/70 R 17.5 Continental Electric-hydraulic system, 24 volt Oversize package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for 40 FT or 20 FT containers Drop-side body on saddle platform Ramps for accessing the low-bed platform 5 pairs of swivelling lashing rings, each rated at 10,000 daN lashing capacity in the low-bed section 4 pairs of stake pockets in the outer frame 3 pairs of swivelling lashing rings on the rear carriage 1 pair of lashing rings in the rear underrun guard, LC 6,000 daN RENTING is the new BUYING – available immediately for rent or full-service leasing.

Condition: new, empty load weight: 10,400 kg, maximum load weight: 45,600 kg, overall weight: 56,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17.5, color: green, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, ABS (anti-lock braking system), extendable to 3m, hydraulic ramps, rear support, supports. Body: 3-axle low-loader trailer with hydraulic loading ramps, 3 x 12t axles, drum brakes, loading height approx. 1030 mm, extendable to 3m, hydraulic ramps operated via its own electric pump! Independent hydraulic pump with electric motor, independent from the tractor unit, gooseneck length approx. 4m, low bed length approx. 8.6m! Iaodpfx Afsw Rf N De Ujt New vehicle from stock! EU type approval currently under review! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles Iaedpfx Aoyq A D Esf Uet * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: used, maximum load weight: 26,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese Mega curtain-side trailer with Dhollandia ramp 9t * Dhollandia tail lift with ramp function * Type DHLSU.90, lifting capacity 9,000 kg, load centre 1,000 mm, supports * Remote control * SAF axles with air suspension and disc brakes * 1st axle liftable * Stainless steel toolboxes * Tyres 435/50R19.5 For further information, we are at your disposal Iaedsyrkplepfx Af Uot

Condition: used, empty load weight: 24,200 kg, maximum load weight: 56,200 kg, first registration: 05/1995, next inspection (TÜV): 01/2020, total width: 25,500 mm, suspension: air, tire size: 245/70R17.5, front tire size: 245/70R17.5, operation weight: 80,400 kg,

Condition: used, maximum load weight: 28,750 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2019, Equipment: ABS, Wiese Low Loader SA 3-36 CS-S Flatbed & Sliding Curtain * Third axle with forced steering * DHOLLANDIA DHLSU.90 tail lift, 9,000 kg capacity * Tail lift operation by foot and hand controls * Maximum internal height rear section: 3,070 mm * Maximum internal height front section: 2,720 mm * Hydraulic rear supports, left and right * Front loading area is 380 mm higher than rear * L/W rear section: 9,450 mm x 2,480 mm Iaodjyqiy Hopfx Af Ujt * L/W front section: 3,610 mm x 2,480 mm * SAF axles * Drum brakes * Winch with cable and remote control * Edscha sliding roof * 25 pairs of small lashing rings, 3 pairs large lashing rings * Lifting roof Interim sale and errors explicitly reserved! Sale exclusively according to our Terms and Conditions Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these may result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all details are provided without guarantee and do not constitute a legal claim. Legal Notice: This sales listing does not represent an offer in the sense of §145 BGB. Rather, the information serves as a basis for contract initiation. All technical details provided are without guarantee and do not constitute warranted characteristics.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Iaedpfx Aoynprwsf Uet Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: used, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2019, Equipment: ABS, Low loader Lecitrailer Iedeullltspfx Af Uoat Newly built Top condition

Condition: used, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 9,600 mm, loading space width: 2,000 mm, total width: 2,070 mm, total height: 1,800 mm, * 2nd owner, from municipal ownership * Rear loading platform height 90 cm, front 140 cm * Total loading length 9600 cm * Fifth wheel size approx. 1.20 m * Toolboxes * Access ramps * Matching fifth wheel coupling included Iaodpfx Afev T E Sye Ujt Errors, typographical mistakes and interim sale reserved. Viewing by appointment.

Condition: new, empty load weight: 781 kg, maximum load weight: 2,719 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, heavy-duty ramp, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Total weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2.719 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. Iasdeu Hrhlopfx Af Ujt

Condition: new, empty load weight: 1,101 kg, maximum load weight: 2,399 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,050 mm, loading space width: 1,790 mm, loading space height: 190 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,450 mm, working width: 2,380 mm, Hydraulics, automatic reverse drive, NEW MODEL incl. 150cm long drive-on ramp, hot-dip galvanizing, parabolic suspension, aluminium floor, *immediately available * NEW MODEL incl. 150cm long drive-on ramp, parabolic suspension, aluminium floor 150cm long drive-on ramp, parabolic suspension, aluminum floor TECHNICAL DATA - Make: Hapert Trailers - Model: Indigo LF-3 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 405 x 179 x 19 cm - External dimensions (LxWxH): 589 x 238 x 145 cm - Loading height of floor: 42 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,101 kg - Payload: 2,399 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: KNOTT parabolic suspension + 100 km/h - Support wheel: Yes, automatic - 100 km/h approval: YES EQUIPMENT: - Brake: Yes - Number of axles: 3 - Floor: Aluminum floor - Drop sides: Steel drop sides - Drop side height: 19 cm - Locks: Eccentric locks - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Without - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Spare wheel: Optional, can be retrofitted - Bucket storage: Optional, can be retrofitted - Superstructures / attachments: Optional, attachable - Ramp chute: No - Ramps/ramp flap: Yes - Type of ramp: Continuous tailgate - Load ramps: - - Drive-on angle: approx. 20 - Supports: Integrated in tailgate - Lashing eyes: 10 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION - 3x parabolic spring axle each 1. hot-dip galvanized - steel drive-on flap standing on shaft 150cm - sturdy eccentric locks - corner stanchions with locks for tailgate can be removed without tools - insertion option at all 4 corners for tarpaulin frames, grid attachment, robust support feet on the drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - optionally with bucket tray - 10x lashing eyelets recessed into the side of the frame profile (1000dAN/kg) TÜV certified - perforated rail on three sides 6cm (Combi Protect Rail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - Parabolic spring axle from KNOTT - Automatic reverse drive - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar REINFORCED - 13-pin plug - Return travel license plug - reversing lights - large safety lights - rear lane departure lights - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved. Iajdpfxeu Hrl Rj Af Uot

Condition: new, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,600 mm, loading space width: 1,980 mm, loading space height: 300 mm, loading space volume: 2.8 m³, color: silver, construction height: 1,680 mm, working width: 2,530 mm, incl. rear ramp / parabolic suspension / spare wheel / bucket storage, automatic reverse drive, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 1010 kg - Payload: 2,490 kg - Interior dimensions: 460 x 198 x 30 cm (L x W x H) - Overall exterior dimensions: 660 x 253 x 168 cm (LxWxH) - Loading sill height: 38 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - incl. vehicle documents Vehicle body: - Brake: yes - Number of axles: 3 - Floor: Wood, Finnish multiplex board - Side walls: Sheet steel, single-walled - Side wall height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 7 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. hot-dip galvanized - steel drive-on flap standing on shaft 130cm - sturdy eccentric locks - support brackets on drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 10x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iasdpfx Afou Hrlqo Uet

Condition: new, empty load weight: 731 kg, maximum load weight: 2,769 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, extremely robust body, hole lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely robust body / hole lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded - Chassis: Steel frame, welded. Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iedpfx Aou Hrkgsf Uoat

Condition: new, empty load weight: 776 kg, maximum load weight: 2,724 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 776 kg - Payload: 2.724 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iedpfxou Hrlde Af Usat

Condition: new, empty load weight: 736 kg, maximum load weight: 2,764 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 736 kg - Payload: 2.764 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iodpfx Afju Hrhrs Usat

Condition: used, functionality: fully functional, empty load weight: 16,300 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: other, tire size: 205/65 R 17,5, color: green, Equipment: ABS, EBS, - 5 axles: 1st axle friction-steered and liftable; 2nd–5th axle hydraulically steered - Extendable: 6,200 mm (total length: 12,800 mm – 19,000 mm) - SAF axles - Sliding hydraulic double ramps with support legs Iasdpjymnmwofx Af Uet - Lifting and lowering device - Drum brakes - Suspension: air-lift Errors and omissions excepted.

Condition: used, axle configuration: 3 axles, first registration: 04/2015, suspension: air, tire size: 445/45/19,5, color: blue, Year of construction: 2015, Equipment: ABS, Krone mega semi-trailer 2015 cover uncover raise lower new tarpaulin Iaodpfx Afsqmnrxe Uot fixed axles

Condition: new, maximum load weight: 38,953 kg, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, MAX100-N-3B-9.30-U Technical data Speed: 80 km/h Total weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Empty weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading area length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Iodpfxeg Sk Trj Af Ujat Loading height with max. load: 860 mm Total width: 2,540 mm Suspension travel: -55/ +145 mm Technical description Gooseneck: Gooseneck with bevelled corners 45° at the front and with a rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring 30 mm thick. Loading area: Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm, with a rear bevel of approx. 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings that can be folded inwards on the central support at the front (LC 10,000 daN). Cutouts in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N). Hardwood flooring approx. 48 mm thick, checkered sheet flooring over the axles. Ramps: Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood flooring. Ramp with hydraulically foldable and unfoldable ramp sections, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair: 40,000 kg Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Tires: 235/75 R 17.5 tires as selected by the manufacturer. Axle: SAF axles, air-sprung, with drum brake, with lifting/lowering function. The last axle is self-steered with an electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included 2" kingpin A galvanized steel bulkhead approx. 400 mm high. Yellow-red air couplings on the galvanized connection strip at the front. 4 pieces of chocks with holder on the bulkhead. (± 5kg) Cable for supplying the electro-hydraulic unit and/or the electric cable winch (35mm², 3.5 m long, max. 250A) between the trailer and tractor unit with plug connection (ANDERSON-ANDERSON) Galvanized folding supports under the slope of the loading area. A bracket for a rotating beacon at the rear of the trailer. Control valves for the ramps attached to the right-hand side of the trailer. (± 4kg) Yellow reflector tape in accordance with EU regulations on the side and rear of the Trailer.

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Low loader semitrailer MAX100 4 A 8.60 U Technical data Speed 80 km/h Total weight 60,800 kg Fifth wheel load 18,000 kg Axle load 42,800 kg Empty weight Payload Gooseneck length 3,850 mm Fifth wheel height loaded 1,250 mm Loading area length 8,600 mm Extendable by 5,400 mm Axle spacing 1,360 mm Rear steering radius 2,300 mm Loading height with max. load 860 mm Total width 2,540 mm Suspension travel -55/+145 mm Technical description Gooseneck With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring 30 mm thick Loading area in extendable version with rear slope of approx. 1,000 mm x 8° 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) 1 pair of lashing rings lying in the front of the loading area (LC 10,000) Hardwood flooring approx. 48 mm thick, checkered plate above the axles Ramps Iaedpfx Afeg Sk T Dj Ujt Two-part steel ramps A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable. Maximum load per pair 40,000 kg Tires 235/75 R 17.5 Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice Rear section metallized and painted in RAL 9010 (pure white). Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction made of high-strength fine grain steels. Steel qualities: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: A galvanized steel front wall approx. 400 mm high. 2" kingpin 4 pieces of brake shoes with holder on the bulkhead. A holder for a rotating beacon at the rear of the trailer. SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function. The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. Holder in the rear area of the gooseneck for aluminum loading ramps. Galvanized folding supports under the slope of the loading area. Mechanical locking of the loading area. A spare wheel with holder in front of the bulkhead. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection strip at the front. On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket. A mud flap at the rear of the trailer. Manual and description On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H). The rear galvanized plug-in stanchions are removable. Length of the body approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container

Condition: new, axle configuration: > 3 axles, Year of construction: 2026, Further information here: Iajdpfx Aov D Abmof Ujt

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Fifth wheel height loaded: 1,200 mm Steering radius to the rear: 2,300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height with max. load: 350 mm Chassis length: 2,600 mm Loading height of rear chassis with max. load approx: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Total width: 2,540 mm Total weight depends on fifth wheel load. Low bed: Low bed with external supports in extendable design "SUPER LOW" design, length approx. 6,850 mm. Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking. The supply lines are protected in the extendable supports and automatically adjust to the respective low bed length. 5 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner support for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of tension rings lying in the trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm stakes in the outer frame Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,785 mm. Gooseneck can be raised/lowered hydraulically and removed. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDEL-AXLE: "PENDEL-AXLE", all axles hydro-mechanically forcedly steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinder with shut-off valves and pins for securing in raised position. Final painting of the axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tool. Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting cables to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with Iodpfx Aoizu Nwsf Usat 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paint: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's discretion. Load index (146/146F) Preparation for screw-on container positioning for 1x 20' or 1x 40' container on the outer supports. Without container locks. i i2" kingpins iA galvanized steel bulkhead, approx. 400 mm high. iA spare wheel with holder in front of the bulkhead. i2 brake shoes with holder on the bulkhead. iYellow-red air couplings on the galvanized connection strip at the front. Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles. (without insta

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: Ijdew Dl Hwepfx Af Ueat BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.