2012 Brandt KDF 670

Brandt KDF 670

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Hjdpox E Eggjfx Abneni Application Types Edge Banding

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Hodpexraimjfx Abnjni Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 2005, machine/vehicle number: 0-261-06-3662, functionality: fully functional, operating hours: 6,635 h, power: 16.2 kW (22.03 HP), input voltage: 24 V, input current: 35 A, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, actuation type: electric, We offer this used Brandt KDF-670 edge banding machine, year of manufacture 2005. Technical specifications: Manufacturer: Brandt Kantentechnik GmbH Model: Brandt KDF 670 Year: 2005 Workpiece height: approx. 8 – 60 mm Edge thickness: approx. 0.4 – 8 mm (depending on material) Feed speed: approx. 11 m/min Glue system: Hot-melt adhesive (EVA) Edge material: ABS, PVC, melamine, veneer, solid wood strips Operation: Control panel on the machine Aggregate equipment: - Jointing unit - Glue application with gluepot - Pressure section with multiple pressure rollers - End trimming unit (front / rear) - Flush trimming unit - Radius trimming unit - Scraper unit (radius / flat) - Buffing unit Condition: Used machine Fully functional, with age- and use-related signs of wear Hsdpfx Abjyr S Enenjni Other information: Machine inspection under power possible by appointment Loading possible by arrangement. If you have any questions or require further information, please do not hesitate to contact us by message or phone.

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Hsdpfx Aboynhwfsnoni Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, Year of construction: 2012, max. workpiece length 4600 mm profile spindle 1 Stück BIESSE ROVER C WMS 6.50 CNC Machining Center for Windows For sale on behalf of a customer, machine is still in operation Hsdpfx Asyif S Hsbneni ----- Biesse Rover C 6.50 WMS CNC Machining Center - Windows Machine with automatic loading and unloading system Manufacturer's Technical Specifications: ----- Working area: X: 4,600 mm Y: 1,535 mm Z: 230 mm Fixed milling and drilling units: ----- Main spindle ----- 1 milling unit, HSK F63, with C-axis Drilling and sawing units ----- Multifunction unit Saw unit Drilling head BH 9 with Drill Quick-Change System Tool Changer: ----- Total 66 slots: 1 x 22 pieces + 2 x 22 pieces in the "Flexstore" Change Units: ----- HSK F63 Angle Unit with 1 output (lock box) for horizontal milling HSK-F63 Angle Unit with 4 outputs (3+1) for horizontal drilling HSK-F63 Angle Unit with 4 outputs for horizontal milling or drilling Machine Table ----- Console table with 10 crossbeams, automatic positioning Control ----- XP 600 CNC Control Software: DIREKT CNC NC-HOPS 6.1 DXF interface BIESSE RM 850 remote control Further features ----- Biesse EPS automatic table Chip guide element Vacuum pump 250 m³/h Special workpiece clamping system for windows Chip conveyor belt CE marking Space requirement L x W x H: approx. 10,600 x 4,700 x 2,600 mm Machine including interchangeable units Machine without machining tools (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine with jointing cutters and coping unit, designed for processing EVA hot-melt adhesives Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Coil separation: 3 x 45 mm or 0.8 x 65 mm Machine length: approx. 6,860 mm Top pressure manually height-adjustable Equipment: Manually adjustable infeed fence Jointing unit with 2 motors, 2.2 kW (each) both motors pneumatically controlled Hot-melt adhesive application Pressure zone with 1 primary pressure roller and 3 subsequent pressure rollers End trimming unit with 2 motors, each 0.35 kW automatically adjustable via program from chamfered to straight trim cuts Edge trimming unit with 2 motors, each 0.55 kW, for flush trimming, chamfer trimming, or radius trimming with 4-position fixed-point adjustment for side tracing Hjdsygg Nkopfx Abneni Grooving unit with horizontal shaft, e.g., for back panel grooves Copy milling unit with 2 motors, each 0.35 kW Pneumatic infeed and outfeed control Profile scraping unit with pneumatic infeed/outfeed control Flat scraper unit Buffing unit Additional equipment: * Release agent application at infeed Control system PC 16 with color graphic user interface Attached return system LIGMATECH BOOMERANG ZHR 11 Return system currently not operational, in need of repair

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Hodpfx Abswwk Duonsni

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Joint trimming unit Gluing unit Snipping unit Pre-milling unit Shaping trimming unit Profile scraper blades Surface scraper blades Buffing unit Grooving unit Hnjdpfxox D N T Ej Abnei This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Application Types Edge Banding