Single Edgebanders

BRANDT HIGHFLEX 1440

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Hfodpfx Aeyngz Aobnsd Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.12.010.13, functionality: fully functional, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm Hfodpstvfihefx Abnod 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition Hodpfot Hxxpex Abnefd

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Hsdsx A Tlcjpfx Abnsfd Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Hedpfeyh Ilyjx Abnsfd Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-261-04-5659, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 14 m/min, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A Hfedpsydim Tofx Abned EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Hjdpfx Abewwtpyonefd

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hsdpfexy Tm Iex Abnsfd

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Hfsdpfowwk Duex Abnod

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm Hfsdpfx Abswb Ha Tjnsd – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg