Roller-bearing drawer cabinet

BOTT 8 Auszüge

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Rcedpfemf T Hpjx Abaoh Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts ● Electrical blade tension monitoring with saw blade breakage control

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right Redsvyidmepfx Abajch • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: good (used), Offer 35503 Technical Data: - 6 pieces of roller-bearing drawers, extendable up to 90% - Drawer size each approx. W 450 x D 530 mm Rodpfx Abszi S S Uoaech - Drawer heights: 3 x H 85; 2 x H 130; 1 x H 180 mm - No key available - Cabinet space requirement approx. W 540 x D 630 x H 1000 mm - Weight 80 kg

Condition: used, 6 St. 70/100 kg Rcedpfxsyhhu Dj Abajh ca. 820 x 740x 560 mm weight ca.110 kg drawer measurements 450 x 600 mm Colour 7035/5012 RAL

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm Rcedjxfwd Ispfx Abaoh weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration Rcodpfxjxabaco Abajh - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, operating hours: 3,163 h, fuel type: diesel, fuel: diesel, HAKO Automatic Cleaner and Vacuum Cleaner Name: HAKO JONAS 1450 D Power: Diesel Condition: OK, see photos Used features (please call for any defects) Battery is fully charged Large collection basket with discharge container / hydraulic Brush replaced Item No.: 1450 D Manufacturer: HAKO Year of manufacture: see photo - looks good Operating hour meter reads "3163" 2 brushes Fuel: Diesel Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubbing machines in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. Rcedpfx Abowffaaeaoh If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on distance.) All dimensions are approximate.

Condition: new, cutting diameter 1100 mm saw band length 12000 x 67 mm cutting width 1,6 mm Capacity 90° - round 1100 mm Rcsdoymf Ncspfx Abaoh Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.

Condition: new, table length 900 mm table width 600 mm table height 700 mm Rcjdoupxmfepfx Abaoh weight of the machine ca. 90 Kg dimensions 0,9 x 0,6 x 0,7 m

Condition: used, Year of construction: 2023, operating hours: 2,495 h, Operating hours: 2495, first registration: 01/16/2024. Model year 2024. 2,478 operating hours. Front hydraulics, 4.8 tons. Hydraulic top link. Fixed K 80 ball head. Automatic trailer coupling. Front axle suspension. Rear tires: 710/70-R42, front tires: 600/70R30. 2 rotating warning lights. 16 LED work lights. Datatronic 5 front/rear. MF Connect. Hydraulic pump, 205 l. 50 km/h. MF Auto Guide. Maintenance recently performed. Price: 134,000 euros (net). Internal number: 14688. Location: Patrick & L. Michels. Rcsdpez D Rc Sofx Abaeh