Hardening system / hardening furnace

BMI B54TH - Härteanlage (Vakuum-Öl)

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Ibedeun Siwepfx Ah Ujd Extras: Includes various tool holders, rotating table, user manuals

Condition: used, Year of construction: 2018, pressure 800 t stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² Ibsdpjw D Hkdofx Ah Uod power requirement 475,0 kW Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm total height over floor 6,6 m Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Year of construction: 2000, condition: excellent (used), functionality: fully functional, maximum load weight: 7,000 kg, working height: 1,750 mm, The gas nitration vacuum oven is made up of all the steps involved in gas nitration, carburizing, and tempering. The machine is in very good condition. Ibedpou T N Efsfx Ah Ued

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 320 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 3.7 / 5.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8.000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6.000 (T01-T02-T03) / 4000 (T04) [rpm] - Live tools power : 1 [kW] - X/Y stroke : 142 / 348 [mm] GUIDE BUSH HOLDER 2 - Number of positions : 3 GUIDE BUSH HOLDER WITH AXIS B - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 5.000 [rpm] - Live tools power : 1 [kW] - Stroke axis B : 0 - 135 [°] Ibedpjwdalnjfx Ah Ued SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 2 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] - Live tools power : 1 [kW] POWER SUPPLY - Total installed power : 21 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.150 x 1.280 [mm] - Machine height : 2.010 [mm] - Machine weight : 3.600 [kg] MACHINE HOURS - Number of hours under power : 37855 [h] - Number of working hours : 9578 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : RS232 / PCMCIA / RJ45 / USB - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : MULLER COMBILOOP CL2 * with high-pressure pump : 100 [bars] - Bar loader : IEMCA BOSS 338 HD / 32 LL - Electric transformer

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. Ijdsv Hcwtepfx Ah Usbd used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] Ibjdpfjuha Elox Ah Ujd - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: used, Year of construction: 1967, functionality: fully functional, table width: 1,000 mm, table length: 810 mm, overall weight: 11,000 kg, workpiece weight (max.): 1,200 kg, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, spindle diameter: 120 mm, space requirement height: 2,475 mm, space requirement length: 3,970 mm, space requirement width: 2,230 mm, Equipment: rotational speed infinitely variable, - Maximum power consumption: 14 kW - Rated spindle power: 8 kW - Spindle drive power: 8 HP - Control voltage: 110 V - Table rotation continuously 360 degrees in both directions - Transverse table stroke (X-axis): 760 (+20) mm - Longitudinal table stroke (Z-axis): 760 (+20) mm - Vertical headstock stroke (Y-axis), min. and max. height of the spindle axis above the table: 50-710 (+20) mm - Rapid traverse: 2 m/min - 9 adjustable feed rates: 0.04 - 0.6 mm/rev - Hydraulically continuously adjustable working feed rates in manual mode (strokes): 0 - 3000 mm/min - Optical reading accuracy: linear axes 0.001 mm / manual rotary axis 1 sec. arc - Positioning referenced Accuracy on the built-in scales: ± 0.0015 mm / ± 2 sec. arc - With central lubrication of the guideways Ibedpfxewdwqnj Ah Usd - Internal spindle: ISA No. 40 steep taper with Dixi bayonet, diameter 75 mm - Extras: Various tool holders, accessories, and operating instructions are included.

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). Isdpewah R Refx Ah Usbd For all information that you need, please contact me.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 Ijdohqqnzopfx Ah Uobd PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm Iodpett I Sfefx Ah Uobd CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.