Single Edgebanders

BIESSE AKRON 1440 A

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A Nsdpfx Afew Tq Iws Tjwd

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Nedpfxjwuz Nps Af Tjwd Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Nedpfx Afoyh A I Ao Tewd Availability: April/May 2026 CE certificate Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: used, Year of construction: 2015, machine/vehicle number: 100007528, functionality: fully functional, power: 13 kW (17.68 HP), type of input current: three-phase, total height: 1,700 mm, total length: 9,000 mm, total width: 3,000 mm, Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Njdpfx Afsxmi E Hs Towd Delivery can be arrange in the Republic of Ireland

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software Nwjdpfxswkf Ihe Af Tod - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Nwjdpfx Afewka N Tj Tsd Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Nedjuc U N Ujpfx Af Tewd Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Nwjdpov R Nk Uefx Af Tsd Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Nwedpfx Afsrx S Ipj Tsd Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Nedevzqtxspfx Af Tewd Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak