Sliding table saw

Altendorf F45

Condition: good (used), Year of construction: 2010, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Motor output 5,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 2000-6000 U/min. Kdjdozu Tlaopfx Afkor weight of the machine ca. 1300 kg

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg Kdsdpfx Afehwwlpsksr CE ,marked

Condition: used, Year of construction: 2007, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2007 Technical data Kedpfjzuy Nxsx Afkedr Cutting length: 3000 mm Saw blade diameter, max.: 500 mm Main saw: 5.5 kW Scoring saw: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: saw blade guard, scorer, Used panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Cutting length 3200mm. Cutting width 1300mm Maximum cutting height 130mm (saw blade diameter 500mm) Saw blade and scoring saw swivel 0-45° digitally adjustable Saw blade and scoring saw height adjustment digital Parallel fence manually adjustable Double roller carriage, safety guard Switching on the main saw blade and scoring saw from the control panel and/or the machine table Main motor, panel saw 5.5KW (7.5 HP) (adjustable at 3500/4500/5500 rpm) Scoring saw motor, panel saw Kodpfxjztwvao Afkodr Duplex miter fence

Condition: good (used), Year of construction: 2004, functionality: fully functional, Offered from an insolvency sale is a fully functional panel saw. Altendorf WA 80 Ksdpfx Afszhak Askodr Year of manufacture 2004 Tilts up to 45° with motorized adjustment Motorized height adjustment With scoring saw Max. saw blade diameter 400mm Max. cutting height with a 350mm blade = 98mm at 90° --- 75mm at 45° With motor brake (approx. 4.5 seconds to stop) Carriage length 3200mm Cutting width to the right of the saw blade 1350mm Speeds 3/4/5000 rpm 380 volts Weight 990kg Emergency stop button Duplex fence Wide and narrow blade guard + used saw blades as shown in the picture

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Kodszhm Dpepfx Afksdr Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg Kodpfozdza Dex Afkodr

Condition: used, Year of construction: 2003, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2800 mm Cutting depth: 125 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Kodoy A Hi Depfx Afkedr Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3200 / 4000 / 6000 Motor power: 5.5 kW Motor brake: yes / automatic Extraction port: 80 mm and 125 mm Machine length: 3400 mm Machine width: 1800 mm Weight: 820 kg

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Location: Supplier. Kedpfezccg Dex Afkodr

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. diameter of the main saw blade without scoring blade: 450mm - cutting height with installed 350mm blade: 100mm - electric adjustment of the main blade up/down + angle - electric angle display - electric adjustment of the scoring blade up/down, left/right - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with the guide: 1300mm - with a side carriage - with a scoring blade Kdedozh Izpjpfx Afker - max. diameter of the scoring blade: 120mm - spindle diameter: 22mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 4 types of blade speed - electronic speed display - dust extraction port diameter: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES – electric adjustment of the blade and scoring blade – with original angle guide – carriage length: 3400mm – made in Germany – unpainted – used saw, very good condition Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Altendorf Wa80 panel saw, Ksdpfsyhdb Hex Afkedr 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: good (used), Year of construction: 1985, Panel saw Manufacturer: Altendorf Type: F45 Kdsdpfx Ajztq Ivjfksr Year of manufacture: 1985 Sliding table length: 3,200 mm Cutting width: 1,350 mm Cutting height: approx. 153 mm Saw blade diameter: 450 mm Power: 5.5 kW Speeds: 3000 / 4000 / 5000 / 6000 rpm Scoring saw: No Motor brake: Yes

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage Ksdpfx Aoxuqulsfkedr - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: good (used), Year of construction: 2002, functionality: fully functional, For sale is a robust and powerful SAC CS 40 panel saw, manufactured in 2002. The machine is in good used condition and is ideal for professional use in workshops and carpentry businesses. Technical data: Manufacturer: SAC (Sueri Alfredo S.p.A.) Kdsdpfx Aszf Evrofker Type: CS 40 Year of manufacture: 2002 Sliding table length: 3,000 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 120 mm Motor power: 6.25 kW Voltage: 400 V / 50 Hz 3 saw blade speeds: 2,800 / 4,000 / 5,000 rpm Electric cutting height adjustment Electric tilting adjustment of the saw unit Large-format sliding table Outrigger with workpiece support CE version Equipment: Sliding table with 3,000 mm sliding table length Scoring device Electric height adjustment Electric tilting adjustment Outrigger with telescopic stop Control panel with electronic display 400 V three-phase connection Notes: CAUTION - the cross slide is NOT original! The digital display of the length stop is not available. The machine is supplied without upper dust extraction. Used condition with age-related signs of wear. Functional. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Sled length: 3400 mm Cutting width at the rip fence: 1350 mm Kjdpfx Aezq Srkefkjdr Cutting width at the crosscut fence: 3200 mm Cutting depth: 145 mm Scoring saw: yes With electromotive height and lateral adjustment Rapido scoring system for stepless cutting width adjustment Adjustment range 2.8 - 3.8 mm including scoring saw blade Height adjustment of saw blade: electric Swivel adjustment of saw blade: electric Adjustment of rip fence: manual Adjustment of crosscut fence: manual Display of saw blade angle: digital display Display of rip fence: scale Display of crosscut line: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Palin parallel cutting device as an add-on unit with miter adjustment with display on the sliding table Dust extraction connection: 80 and 120 mm Machine length: 3400 mm Machine width: 2200 mm Weight: 1200 kg Location: in stock at 54634 Bitburg - immediately available -