Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Dkolq Rhijt Egfzs Nsl Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: used, Year of construction: 2006, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: 1760606, Process water treatment plant for approximately 4.5 m³ water filtration with separate bagging system for collecting the filter fines (2x 1 m³) and stainless steel collecting tray, weight approximately 2500 kg, 380 V, 7.5 KW, with wastewater suction pump specifically for collecting water from bridge saws and edge banding machines, plus three Seitz N3R 2" lamella disc filters with inlet and outlet pressure gauges and wall brackets for fine pre-filtering of process water before processing machines or complete stone processing machinery (see advertisements for various accessories) for €55,000. Djlqewctbms Rhi Nskl

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool. Dkslq Rhijrpi E As Nsl

Condition: used, Year of construction: 1991, Vertical mill David Type 50/5152 Year of manufacture 1991 Djlqovy Hzvj Rhi Nekl

Year of construction: 2024, Condition: new, Circular saw for stone with the possibility of straight cutting and at an angle of 45°. The machine in the basic version with a work table tilt of up to 85°, without rotation, which significantly reduces the final price of the machine. Monoblock machine - no additional costs such as pouring foundations under the table, possibility of moving the machine to another place at any time. Tilting head 0°-45° and with rotation 0° - 90°. Due to its weight, the machine is very solid and stable. The machine uses automatic central lubrication and helical gears, thanks to which the machine's operation is much quieter and will work longer. The maximum diameter of the saw is 650mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows smooth speed regulation. Cutting types: ✅ manual – in manual mode, we control the machine's operation mainly using joysticks on the control panel. There is also an option to move the head by a given distance in a given axis ("Manual movement distance"). Thanks to this option, we can precisely move the saw edge, e.g. by 200 mm to the right ✅ automatic – in automatic mode, we can save up to 12 cutting programs in the X axis (left-right) and in the Y axis (front-back). Additionally, we can decide whether we want the saw to return to the home-safe position after the program for cutting elements is finished Machine description: Dkslog I Dnisq Rhi Nel ✅ monolithic base with 2 horizontal beams – replacing foundations; no additional costs (pouring foundations for the table and load-bearing walls), relatively easy to move the machine at any time ✅ solid main bridge - cast iron ✅ tool head with tilt up to 45° and laser ✅ monolithic steel base with 2 horizontal beams (replacing foundations) ✅ work table, tiltable up to 85° ✅ tool head with tilt up to 45° and laser ✅ tiltable table up to 85° ✅ simple and quick machine programming ✅ possibility of working in manual and automatic mode ✅ components of the electrical cabinet based on components from Schneider and Siemens Movement in the given axes: ✅ X axis - cutting movement right - left Movement of the tool support along the bridge, the drive is realized by a helical rack and pinion; bearings on linear carriages ✅ Y axis – bridge movement forward, backward Bridge movement along horizontal guides, drive via helical rack and pinion; bearings on linear carriages ✅ C axis – head rotation Head rotation with disc 0° - 90° ✅ A axis – disc tilt Disc tilt 0°-45° ✅ Z axis – vertical disc movement Hydraulic drive ensures cutting accuracy and precision, manual limit switches 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live"

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 220 mm, nominal power (apparent): 9 kVA, overall weight: 3,000 kg, spindle speed (min.): 9,000 rpm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, 3 axis stone CNC, very good condition, always maintained. Ideal for make tombstones! Cutting by bit, polishing by drums. Very productive! Djlowchlyjq Rhi Njkl I can send more videos, photos.

Condition: like new (used), Functionality: fully functional, Year of construction: 2023, machine/vehicle number: MC-304-ATLAS-8m, 4 CNC-controlled axes for efficient machining of aluminum profiles or workpieces made of aluminum, light metal alloys, and steel. Dkolq Rhisv U T Ure Njl Dealer inquiries welcome! Suitable for 3- or 5-sided machining Milling spindle 5.5 kW, S1, 18,000 rpm with ISO 30 tool holder Automatic tool magazine with 8 positions For drilling, milling, and threading tools, angle heads, and disc milling cutters Key features of the new MECAL technology High travel speeds Optimized travel paths through interpolation of all axes Optimized troubleshooting during service thanks to new CN software Operator software CAD/CAM in 3D technology

Condition: good (used), Year of construction: 2017, operating hours: 2,600 h, Functionality: fully functional, machine/vehicle number: 8467, power: 16 kW (21.75 HP), overall weight: 2,600 kg, total length: 5,500 mm, total width: 1,200 mm, total height: 1,400 mm, input voltage: 380 V, input current: 35 A, frequency: 50 Hz, Equipment: type plate available, Marmo Meccanica LCG 722-SU edge polishing machine, very good condition, regular maintenance and service, last serviced in January 2025 by a service technician, 7 surface supports, 4 bevel supports, extra motor for water groove milling can be switched on, currently still in production, with inlet and outlet roller conveyor, with pressure booster system, self-priming pump S1++, Seitz, power 4.1 kW, 200 l/min at 5.6 bar, plus abrasives and multiple replacement cutters for the upper bevel or complete machine park for stone processing (see advertisements for various accessories) for €55,000. Delq Rewcr Acohi Njkl

Condition: new, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings Dkelqsiu U Ihe Rhi Nsl

Condition: used, Nordberg cone crusher Type SX 100 HP Dslqevy Hyfs Rhi Nokl

Year of construction: 2023, Condition: new, Functionality: fully functional, Circular machine for stone on masonry with the possibility of cutting straight and at an angle of 45°. Machine with tilting of the working table up to 85°, with rotation of the working table 0° - 90°. Head tilting 0° - 45°, without rotation. The machine due to its weight (~6t) is very solid and stable. The machine uses straight gears. The maximum diameter of the saw is 700mm. The circular machine uses the highest quality components from Siemens and Schneider. The machine is controlled by a touch screen and buttons on the control panel. The main motor and axis drive motors have inverters, which allow for smooth speed adjustment. A built-in laser can be used to set the cutting line. Z-axis hydraulic drive. Manual stops must be set to determine the limit position. Work on the machine can be done in manual or automatic mode. In manual mode, we control the operation of the machine mainly with buttons on the control panel. In automatic mode, we can save several different cutting programs in the X-axis (left-right) and in the Y-axis (forward-backward). ✔ Types of cutting * manual - moving the head is done with the joystick on the control panel. * automatic - moving the head is done automatically after setting the cutting programs. Delq Rhoqy Ebhoi Nskl ✔ Machine construction * strong, stable foundations * solid main bridge * tool head with tilting up to 45° * table tilting up to 85°, rotating 0° - 90° ✔ Motion in given axes * X-axis - cutting movement right-left (movement of the tool slide on the bridge). * Y axis - forward-backward movement of the bridge (movement of the bridge along horizontal guides). * Z axis - vertical movement of the head * A axis - head tilt (0° - 45°). 👌 This machine is available "off-the-shelf", it is in our warehouse in Poland - Cisowa street 3, Bilcza 26-026 Morawica | you can make an appointment to see the work of the machine "live".

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,750 mm, travel distance Z-axis: 500 mm, travel speed (max.): 4,500 mm/min, Trade fair machine available at short notice Breton GENYA 5 axis bridge saw Space requirement (length) 7200mm Space requirement (width) 6150mm Space requirement (height) 3050mm Max. Saw blade diameter 600 mm Swivel axis "A "0 / 90° Rotation axis "C" 380° Tilting table, rubber support X-3800 mm Y-2750 mm Z- 500 mm Various software options available, Rockettool can be retrofitted (motor spindle) Machine is available at short notice, as trade fair machine. Delq Rhijtq Hbyj Njkl

Condition: like new (used), Denver cnc quota . Works only 3000 hours Djlqov Acqls Rhi Nskl

Condition: used, Year of construction: 2012, operating hours: 5,500 h, Functionality: fully functional, machine/vehicle number: 53922, total width: 6,200 mm, total length: 5,740 mm, total height: 2,960 mm, power: 16 kW (21.75 HP), overall weight: 7,150 kg, input voltage: 380 V, input current: 35 A, frequency: 50 Hz, Equipment: type plate available, Breton Easycut FE600 Turbo bridge saw with steel foundations, rotating/tilting work table, saw angle manually adjustable up to 90°, pneumatic table control, currently still in production, with pressure booster system self-priming pump S1++, Seitz, power 4.1 KW, 200 l/min at 5.6 bar or complete machine park for stone processing (see advertisements for various tools) for €55,000. Dkelq Rhjwcqphsi Nol

Condition: used, Year of construction: 2002, Levibreton KCP is a calibrating machine for levelling granite tiles, which move on a conveyor belt, using a series of diamond tools. Djlqsvuaxws Rhi Nokl This machine is based on a revolutionary processing concept, covered by Breton patent, which employs calibrating spindles with double motorization: in each spindle, the first motor provides the low-speed rotation of the roller-holding head, while the second motor provides the high-speed rotation of 6 radial rollers equipped with di-amond tools. This new technology offers the following advantages: - rapid adjustment of the working width as the calibrating section does not require any variation; - perfect surface levelling; - "fine-honed" surface finish which enables to reduce the number of the following levelling units and, consequently, the dressing costs.

Condition: used, Year of construction: 2002, Krupp cone crusher Type Krupp Kubria 90/1-08 Dkelq Rhiovy Hy Eo Nel Year of manufacture 2002

Year of construction: 2023, Condition: new, Functionality: fully functional, Circular saw on steel walls for stone with the possibility of straight cutting and at any angle from 0° to 45°. Machine with a work table tilt of up to 85°, with rotation of 0° - 45° - 90° - 180° - 270°. The head tilts every 1° in the range of 0°-45°, without rotation, allows for cutting blades. Due to its weight, the machine is very solid and stable. The machine uses manual central lubrication and straight gears. The maximum diameter of the saw is 1200mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows for smooth speed regulation. A built-in laser can be used to set the cutting line. Manual limit switches were used on the Z axis to determine the limit positions. Dkslq Roqazbbohi Nsl Machine features: • Possibility of cutting at an angle of 0°-45° with a tilt of 1° Precise setting of the cutting angle every 1° enables a wide range of applications, from simple cuts to complex work with materials of various shapes. This solution is ideal for cutting blades, which makes the machine extremely versatile. • Tilting work table (0°-85°) and full table rotation (0°-360°) The work table with an angle of inclination of up to 85° allows convenient and safe processing of heavy blocks of stone. Additionally, full 360° table rotation with stops (0° - 45° - 90° - 180° - 270° - 360°) allows precise positioning of the material without the need to reposition it. • Laser cutting line indicator The built-in laser indicator facilitates precise positioning of the material and cutting line, which increases work accuracy and reduces the time required to prepare for cutting. • Touch control and joysticks The machine is equipped with a modern Delta touch panel and joysticks for manual control, which makes operation intuitive, and adjusting operating parameters to the operator's needs quick and precise. • Solid, heavy construction The DSL-1200 45Q circular saw is very massive, which ensures stability during operation, even when cutting large and heavy blocks of stone. This stability increases cutting precision and reduces vibrations, which translates into higher cutting quality. 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine working "live"

Condition: new, Year of construction: 2025, If you are looking for a cone crusher for sale, you can call us 24/7. CONSTMACH's innovative cone crushers are the perfect solution for those looking for superior performance and durability. Our wide range of models offers options to suit every need. While our HP100 model draws attention with its compact and powerful structure, our HP800 model provides superior efficiency even in the most challenging conditions. Each of our cone crusher models is manufactured to the highest quality standards. The total weight of the HP100 model is 5,400 kg, and the weight of the boiler, boiler liner, cover and bunker is 1,320 kg. This model, whose recommended maximum power varies between 90 Kw and 125 HP, offers impressive performance with a countersunk shaft speed of 750-1200 rpm. HP200 and HP300 models are designed to meet increasing power needs and have a recommended maximum power of 132 Kw and 200 KW, respectively. For heavy-duty applications, our HP400 and HP500 models stand out with maximum power capacities of 315 Kw and 355 Kw. The total weight of the HP400 is 23,000 kg and the HP500 is 33,150 kg. Our largest model, HP800, makes a difference in the industry with its total weight of 68,650 kg and maximum power capacity of 600 Kw. CONSTMACH cone crushers promise high efficiency, low maintenance costs and long life. Head mantle and feed plate weights are carefully balanced for optimum performance on each model. All models from HP200 to HP800 offer countersink rotation speeds ranging from 700-1200 rpm to suit a variety of operating conditions. By choosing CONSTMACH cone crushers with these superior features, you can increase your production efficiency and profitability. Manufactured using high quality materials and advanced manufacturing techniques, these breakers offer reliable performance for many years. An ideal choice for those looking for both performance and durability, CONSTMACH cone crushers add value to your investment. Dkelq Rhioud Taho Nel HP100 Cone Crusher Technical Specifications Total Weight: 5,400 kg / 11,900 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 1.320 kg / 2.910 Lbs Head Mantle and Feed Plate: 600 kg / 1.325 Lbs Recommended Maximum Power: 90 Kw / 125 HP Countersink Spindle Speed: 750 - 1200 rpm HP200 Cone Crusher Technical Specifications Total Weight: 10,400 kg / 22,960 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 2.680 kg / 5.915 Lbs Head Mantle and Feed Plate: 1.200 kg / 2.650 Lbs Recommended Maximum Power: 132 Kw / 200 HP Countersink Spindle Speed: 750 - 1200 rpm HP300 Cone Crusher Technical Specifications Total Weight: 15,810 kg / 33,490 Lbs Weight of Boiler, Boiler Liner, Lid and Bunker: 3.525 kg / 7.765 Lbs Head Mantle and Feed Plate: 2.060 kg / 4.550 Lbs Recommended Maximum Power: 200 Kw / 300 HP Countersink Spindle Speed: 700 - 1200 rpm HP400 Cone Crusher Technical Specifications Total Weight: 23,000 kg / 50,600 Lbs Weight of Boiler, Boiler Liner, Cover and Bunker: 4.800 kg / 10.575 Lbs Head Mantle and Feed Plate: 3.240 kg / 7.130 Lbs Recommended Maximum Power: 315 Kw / 400 HP Countersink Spindle Speed: 700 - 1000 rpm HP500 Cone Crusher Technical Specifications Total Weight: 33,150 kg / 73,000 Lbs Weight of Boiler, Boiler Liner, Cover and Bunker: 7.200 kg / 15.800 Lbs Head Mantle and Feed Plate: 5.120 kg / 11.280 Lbs Recommended Maximum Power: 355 Kw / 500 HP Countersink Spindle Speed: 700 - 950 rpm

Condition: excellent (used), Functionality: fully functional, Promasz circular saw for discs up to 1300mm together with a lathe for turning columns. The machine is in operation, intended for self-disassembly. Dkelq Rsv Uqbcohi Nel Profiling possible.

Year of construction: 2008, Condition: like new (used), machine/vehicle number: 807625, A0625 – Los Angeles Abrasion Machine To determine the abrasion resistance of aggregates. The machine consists of a steel cylinder 12 ± 0.5 mm thick with an internal ø of 711 x 508 ±1 mm internal length with horizontal rotation shaft. The cylinder rotates at 30- 33 rpm. The motor and the cylinder are mounted on a firm steel base. Dksljfngq Hjq Rhi Nsl The control panel consists of the on-off switches and the automatic turn counter with digital display. Supplied complete with a set of 12 abrasive balls and a sample tray. Power: 1 hp. Power supply: 220/380 V. 50 Hz. Dimensions: 1120 x 860 x 820 mm. Weight: 350 kg Price: 2.000 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Breton Vertika is the modular vertical storage system for marble, granite, quartz and ceramic slabs Dkelq Rhoivamqji Njl

Condition: used, Year of construction: 1990, Svedala cone crusher Type H 3000 FA EC2M 22-25-29 Dkolq Rhevy Hwqji Nol Basic construction year 1990

Year of construction: 2023, Condition: new, Functionality: fully functional, The SHAMP-3200 single-head stone polisher, automatic polisher, is a professional machine that is used for polishing, grinding and brushing the stone surface and calibrating the thickness using diamond wagons. The monoblock construction ensures no additional costs such as pouring foundations for the table. An additional advantage is the ability to move the machine to another place at any time and the ease of installation. The single-head, bridge-type stone polisher is convenient to use and allows for quick and effective polishing work on most stone surfaces. The slide is guided by a linear guide immersed in oil, with long service life, high machining accuracy and an advanced control system. The machine is equipped with a PLC controller and high-quality components: Xinje touch screen, Zhengtai contactor, Schneider switching power supply, Omron relay, Omron proximity sensor. In the SHAMP-3200 polishing machine we can process stone with a thickness of 10-120 mm. Grinding head with the possibility of mounting 6 polishing wagons. Pneumatic pressure with an air demand of 0.6m³. Z axis travel equal to 110mm. The limit switches are set manually. The machine has a tilting work table up to 85° (hydraulic lifting), which greatly facilitates the loading of stone in machines of this type. This allows for easy and quite precise positioning of the stone in the appropriate position for grinding. The machine uses separate inverters to regulate the feed speed on the X axis and the Y axis. Their power is appropriately adjusted, so you can precisely control the axis feed speed, which is particularly useful in this type of stonemasonry machines. Dslq Rsg Iph Rshi Nskl

Condition: new, Year of construction: 2025, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Deljwcav Roq Rhi Nekl Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Year of construction: 2016, operating hours: 100 h, Condition: excellent (used), Functionality: fully functional, 4-head grinding machine +1 spare place to be added, Promasz. Sliding table width 180cm, Working table length/width: 700/200cm, Roller loading table with dimensions length/width: 230cm / 175cm, Roller unloading table with dimensions length/width: 230cm / 175cm, Minimum slab thickness: from 2cm (to be adjusted/set). Control to be updated by the manufacturer. Available for viewing by appointment 59-600 Lwówek Śląski, Oświęcimska 7a. The machine requires uploading new software from the manufacturer Promasz. Price PLN 80,000 net ex works (€19,000). Dkjlq Rov D I S Djhi Nsl Grinding room dimensions length/width/height: 700cm / 350cm machine including 180-200cm grinding table / 260cm. Fence installation width 500cm.