Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw Prodpfji Ew Tbsx Abajc rotor lenght 100cm the machine is 100% efficient

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Prjdpjwq Rapjfx Abaec

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Podpfxsyu Srms Abajrc Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 17,400 kg, power: 257 kW (349.42 HP), We offer this new Lindner Urraco 75 D twin-shaft shredder, manufactured in 2023. Serial number: 8185 Type: Urraco 75 D Year of manufacture: 2023 Power: 257 kW Prjdsz Sqzfspfx Abaec Weight: 17.4 t Magnet: 1.0 t If you have any further questions or require more information, please send us a message or call.

Condition: used, machine/vehicle number: 14132, Rotor diameter: 457 mm Rotor width: 1420 mm Number of rotor blades: 102 Stator blades: 1 row, 5 pieces Inlet cross-section: approx. 1400 x 1600 mm Drive motor: 90 kW Prjdpfx Aoz Iulfebaoc

Condition: good (used), CRUSHER / GRINDER / SHREDDER / MILL for polystyrene (EPS) waste. Power: 15kW The unit comes with an automatic control cabinet. It is prepared (has outputs) for a mill, a fan, and a conveyor belt. It has both manual and automatic functions. In automatic mode, it regulates the material feed by itself. Prjdpfoumk Nmjx Abaoc The machine has been designed to prevent motor overload (“clogging” or “stalling”): Load monitoring: The system continuously measures the mill’s current draw (amperage). Automatic stop: When too much material is fed and the current rises above the set limit, the conveyor belt feeder stops automatically. Automatic restart: Once the mill processes the accumulated material and the load decreases, the system automatically restarts the feeder to supply the next batch of material. Tag: EPS, crusher, grinder, foam shredder, mill, polystyrene recycling machine, foam crusher, compactor, foam densifier, volume reducer.

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Pjdpfxjyuvr Ro Abaerc Including control cabinet

Condition: used, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, Year of manufacture: 1990 - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pedpfx Abswmbcyoajrc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Motor: Predpfx Abjwh I Uxsasc 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Prjdpfjxgfwxox Abasc Rotor length: 1000 mm Rotor diameter: 380 mm Main motor: 18.5 kW Automatic waste feeding

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, rotor diameter: 252 mm, number of blades: 30, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 90 rpm, input voltage: 400 V, AZR 600 18.5 kW 30 rotating knives with welded knife carriers, including 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Slide with pressure plate Vibration-dampening machine feet Automatic star-delta starter Automatic shutdown when the hopper is empty Control cabinet with 5 m cable and PLC control Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW - 400 V - 50 Hz - 3-phase Prsdez I R Shjpfx Abasc Hydraulic motor: 0.75 kW - 400 V - 50 Hz - 3-phase Further information on the knife system: reinbold-entsorgungstechnik.com/files/prospekte/messer-rotor-sys teme-2021.pdf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 8813, power: 160 kW (217.54 HP), rotational speed (max.): 85 rpm, Details: • Includes screen • Voltage: 400V/50Hz, TN-C • Cutting unit 43P • 1 x 160 kW, IE6, 87 rpm • Mechanical central lubrication • Hopper • Power control with frequency converter, including air conditioning (up to +40°C) • Rotor cooling preparation (connections) • Counterknife cooling (connections) • Lindner ATB – Automatic belt tensioning system with belt coupling • Energy measurement module • Bus connection to external control system Pedpfxjxup Epj Abasrc • Basic package – cable material up to 5 meters • Wear protection package (checked pattern for 43P) • Machine operation down to -25°C • Control cabinet enclosure for temperatures down to -25°C

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 main motor 55kw Pjdpfx Aetpcn Usbajrc rotor length 100cm the machine is 100% efficient

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Podpeyk Ea Asfx Abaorc

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System Pedswtmw Aepfx Abajrc The final reduction process takes place in the lower chamber, which consists of: -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Discharge conveyor Overband magnet Pedexf Aqtjpfx Abaorc

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Upon consultation, we can also deliver and install the machines. Podpfx Aow Ry Alsbajrc Please provide your name, company name, and a valid telephone number so we can respond quickly.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 600, number of blades: 20, rotational speed (max.): 1,475 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 22 kW Speed: 1,475 rpm Hydraulic unit power: 3 kW Pjdpfjz Ebbbox Abaerc Oil tank capacity: 48 l Number of axles: 1 Opening width: 600 mm Opening length: 250 mm Screen perforation: 15 mm Number of fixed blades: 20+ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,350 x 2,400 mm Number of transport packages: 3 Note: The magnet is not included in the offer.

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Counterknives fully rewelded and hardfaced Prsdpfjw Ufhbsx Abasc Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Contact us for price and further details.

Condition: used, total length: 1,800 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 1.000 kg Price: On request Shredder  Hopper opening: 950mm x 700mm (lxw) overall size: 1620mm x 1370mm x 215mm (lxwxh) Motor:  50Hz 11kW - Documentation available: No - CE certificate present: No - Transport dimensions: 1800mm x 1400mm x 2050mm (l x w x h) Pedsxa D Iispfx Abaerc - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Electric drive: 2x 160 kW Powerbelts new. Incl. hydraulic aggregate, electric control cabinet. Pjdpfowg Ev Dox Abasrc

Condition: new, Year of construction: 2026, Shredding shafts for Arjes Tytan 900 / 950 - for mixed waste - for wood - for metal - special shafts - other Prsdsyf Uyzjpfx Abajc

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Predpfx Absxbyx Tsaoc Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts - Special shafts - Customer-designed shafts - Spare parts Predoychwzspfx Abasc - Knives Concrete / Paddle / Star / Metal / Electro and many more!

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Predpfx Ajxtp Disbasc Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.