Used Single shaft shredder for sale

sonstige Einwellen-shredder Typ HR 1300

used

Call

Rotor diameter: 300 mm Rotor width: 1250 mm 160 rotor knives Stui8r8t 1 row of stator knives inlet: approx. 1300 x 1400 mm Drive: 55 kW

Listing

386 Buxton Rd, Stockport SK2 7BY, UK

7010 km

Lindner MICROMAT 2000

Lindner Micromat 2000

refurbished (used)

€47,300

Call

For sale Lindner Micromat 2000, 42000 hours. This machine is in extremely good condition, New motor all bearings have been changed, all hydraulics including the rams are new. And the rota has also had work. The machine is ready to go to work. For more information or to arrange a viewing please get in touch Cll9qzaam7

Listing

Meckesheim

7894 km

Oneshaft-Shredder

ZERMA ZWS-1100

2008

used

Call

ZERMA single shaft shredder ZWS-1100 Condition: Used / Defective Gearbox defect Incl. switchgear & screw conveyor Incl. screen baskets with 25mm & 50mm perforation Will be overhauled soon. Also available in UN overhauled condition. Technical Data Drive: 30kw Hydraulics: 3,75kW 4 stator knives Crisyzjj92 X rotor knives rotor diameter: 400mm Working width: 1100mm

Discover more used machines

Two shaft shredder

Mobile shredding plant

Same explorer 60 dt

Fiatagri 60-66 dt

Fiatagri 60-94 dt

Same explorer 60 ii dt

Massey ferguson 3060

Benford pt 6000

All-kor akt 1000

Becx obks50-35

Listing

Meckesheim

7894 km

Single-shaft shredder

WAREMA EWZ 75

used

Call

Feed opening: approx. 1150 x 1200 mm Nm7wpgqh Rotor width: approx. 1200 mm Rotor diameter: approx. 600 mm Stator knives: 10 Rotor knives: 96 Incl. a second-hand control unit.

Listing

Waardenburg

7530 km

zerma zws 2600

Zerma ZWS 2600

2013

ready for operation (used)

€52,500

Call

Large wood shredder 250cm roller 220 KW drive. The machine is equipped with cutting crowns of 34 x 34 mm on the rotor, the blade holders are interchangeable by means of bolts. different sieves are included with the machine 25 mm 30 mm 40 mm The machine is complete and ready to use. The machine is equipped with sensors that stop the machine in the event of large pieces of iron or rubble, so that it suffers little damage. 2v2mgq If you have any questions, call or leave a message.

Listing

Jülich

7651 km

SHREDDER

VECOPLAN VAZ 2000 MNF

refurbished (used)

Call

Shredder Typ Vecoplan 2000 MNF, 160 kW fully refurbished 62 knives 60 x 60 mm 880nsh rotor speed 165 rpm

Listing

Vecoplan Einwellen-shredder Typ VAZ 145/250

Zuzenhausen

(dealership location)

7895 km

BH1500 Single Shaft Shredder

Vecoplan Einwellen-shredder Typ VAZ 145/250

used

Call

Rotor diameter: 370 mm Rotor width: 2500 mm 71 rotor knives B73t2q8l2q 1 row of stator knives inlet: approx. 1450 x 2500 mm Drive: 75 kW

Listing

Stockport

7008 km

Genox BH1500

2023

new

Call

Genox BH1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 90kW Drive motor (110kW & 150kW options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. Fdjcam23m 1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters ca...

Listing

Częstochowa

8375 km

Shredder Weima WLK15 90kw

WEIMA WLK 15

2008

excellent (used)

€80,000

Call

Single shaft shredder from Weima Typ WLK15 Main motor 90kw Loading conveyor with detector Unloading conveyor Dj3j2xizi Add used rotor New fixed knives News screens

Listing

Meckesheim

7894 km

HERBOLD HR 122 P

used

Call

Listing

Wardenburg

7622 km

Preshreeder

Doppstadt DW 2560

1999

good (used)

Call

The DW 2560 pre-shredder is suitable for shredding waste wood, roots, green waste, household, bulky, industrial and other waste. Max weight: 19.000 kg Engine: Mercedes-Benz Power: 260 kW Rotor length: 2.500 mm Rotor diameter: 600 mm Teeth: 17 Cqkhbbndth Condition: - Good and ready for use - Defective hydraulic hoses replaced - Service new - All iols and filters exchanged - Color refurbishment - Without road permission

Listing

Jülich

7651 km

CUTTING MILL

PALLMANN PS-H 1000 x 1400

2014

excellent (used)

Call

CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm Byynoq78 AVAILABLE AND READY TO WORK

Listing

Zuzenhausen

(dealership location)

7895 km

Doppstadt Shredder DW3060 Büffel

AMIS Einwellen-Shredder ARS 250

new

Call

Technical data Number of shafts: 1 Working width: 350 mm Drive system: V-belt Jxuvee Rotor speed: 450 rpm Number of rotor knives: 18 Number of stator knives: 1 drive motor: 18,5 kW 400 Volt 50 Hz control cabinet: integrated Weight: 1450 kg Dimensions length: 2450 mm width: 1050 mm Height: 1684 mm Suitable for plastic pipes & cardboard tubes up to Ø 250 mm Wall thickness: 25 mm

Listing

Geestland

7612 km

Doppstadt DW 3060

2006

ready for operation (used)

€118,990

Crushing line with Rapid G500-120 55kw

Year of construction 2006 Operating hours approx. 8,690 hydraulic support foot rear band hydraulic drive Dcidwjpv3 1x auxiliary hydraulics magnetic tape Wireless The machine is in good condition. The roller has to be welded on or exchanged (I still have a very good used exchange roller in stock). price plus VAT We have other machines available. Please contact us!

Listing

Częstochowa

8375 km

Rapid G500-120

2007

excellent (used)

€80,000

Mobile slow-speed shredder

Call

Crushing line with Rapid G500-120 55kw Granulator from Rapid company type : G500-120 main motor 55kw rotor lenght-1200mm rotor diameter -500mm loading conveyor with detector gate big-bag station with blower and cyclone Cljtlrqhfl add screen and knives

Listing

Meckesheim

7894 km

Cutting Mill

PALLMANN Type PS 4-5 G2-2

used

Call

Optimally suited for hollow bodies, bulky molded parts, foam material Rotor 400 mm diameter x 500 mm width Rjyyn Inlet opening at the housing flange approx. 500 x 500 mm Open rotor with 2 knife rows Housing hinged, with 2 stator knife rows Drive motor 18,5 kW

Listing

Vechta

7648 km

DOPPSTADT DW 3060 Büffel

2005

excellent (used)

Call

Listing

Wadersloh

7711 km

SHREDDER

JENZ HE 300-1000 WEA

good (used)

Call

Complete wood shredding line, shredder motor 55 kW. It is consisting of: Crosgb9ywe - shredder type Jenz with vibrating infeed table - 1 piece of outlet conveyor - 1 pieces of magnet - checked in workshop - good working condition

Listing

Zuzenhausen

(dealership location)

7895 km

Doppstadt Shredder DW3060 Büffel

ZERMA Einwellenzerkleinerer ZERMA ZCS

new

Call

The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. G0tuah7 By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contrib...

Listing

Geestland

7612 km

Doppstadt DW 3060

2009

good (used)

€99,000

Model DW 3060 Buffalo Year of construction 03/2009 Operating hours Approx. 10,120 hours Location 27607 Geestland Short term availability Furnishing • Basic version shredder DW 3060 Büffel • 315kW diesel engine Daimler OM 460 LA EUROMOT III A • 3 axle trailer • 25,000kg total weight • Discharge belt width 1,404 mm length 5,500 mm • Discharge height 3,304 mm • Hydraulic support leg • L tooth • Auxiliary hydraulics • Wireless Miscellaneous • Defective drawbar! The machine can only be transported w...

Listing

Częstochowa

8375 km

WEIMA WLK10 55KW

WEIMA WLK 10

2006

used

€38,000

V1500 Single Shaft Shredder

Call

Single shaft shredder Weima WLK10 main motor 55kw rotor lenght 100cm the machine is 100% efficient Ckcygz0qsb

Listing

Stockport

7008 km

Genox V1500

2023

new

Call

Genox V1500 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 75kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 02emk 1400mm wide x 400mm diameter Rotor with 77pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is cont...

Listing

Vechta

7648 km

Mobile shredder

DOPPSTADT DW 3060 Büffel

2014

excellent (used)

Call

Diesel engine: 430 HP I3io9fb Rear duscharge conveyor Overband magnet Hydr. self-propelled drive (for moving on site) Radio remote control

Listing

Tickhill Rd S66, UK

7065 km

Single Shaft

WEIMA WKS 1400

2018

excellent (used)

€75,500

Call

Weima WKS1400 static shredder, Year 2018 Cke7hfdjbt Hours: 4202 Option to buy custom conveyor with shredder, the conveyor has a built in bunting metal detector with actuator to divert metal contaminants away from final produce.

Listing

Lindner Einwellenzerkleinerer Lindner T1500

Zuzenhausen

(dealership location)

7895 km

Shredder Product destruction

Lindner Einwellenzerkleinerer Lindner T1500

used

Call

Rotor knives: 48 pieces Stator knives: 6 pieces Rotor diameter: 283 mm Rotor width: 1.450 mm Rotor speed: approx. 100 rpm inlet cross section: approx. 1,430 x 1,530 mm drive motor: 37,0 kW hydraulics: 4,0 kW Weight: approx. 7,000 kg Suitability: pipe and profile crushing Brquc0ugad

Listing

386 Buxton Rd, Stockport SK2 7BY, UK

7010 km

AXO FAT 704-32HH

2015

good condition (used)

€22,622

Call

For sale AXO FAT 704-32HH Product destruction shredder. good for books, wee hard drives etc. 2015 machine. Replaceable hard heads on the shafts. Very good condition machine can be seen working in Nottingham UK. For more information or to arrange a viewing please get in touch Cevee9uila

Listing

Filderstadt

7962 km

Shark

mütek 630 K

2023

as good as new (ex-display)

€27,700

Call

Special machine for shredding cardboard boxes or plastics Included: + Double row of knives + Four-sided segment bottom reduces the danger of the slide jamming enormously (four-sided protection on the hydraulic slider). Recommended for materials with thickness smaller than 3mm. + Closed K bearing Recommended for plastic or paper/cardboard shredding. Especially with fine screen baskets 20 mm and smaller. Beksd3tlzt Well suited for shredding of: - Paper, cardboard, pipes, profiles, boxes, c...

Listing

Braak

7701 km

V1200 Single Shaft Shredder

Doppstadt DW 3060 Biopower Type F

2017

refurbished (used)

Call

Doppstadt DW 3060 Biopower Type F - Year of manufacture 2017 - Operating hours 6118 - Engine MTU 490 hp - AD BLUE Ihmxmmt - Weight 25.000 Kg - Remote control - 42 teeth - Humidification system - Tailband 5,5m - Overband magnet Machine is overhauled and immediately available

Listing

Stockport

7008 km

Genox V1200

2023

new

Call

Genox V1200 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 55kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1200mm wide x 400mm diameter Rotor with 55pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. 9vw3crro Output size is c...

Listing

Mape S-420/Zerkleinerer/Schredder/Häcksl

Butzbach

7816 km

Mape S-420/Zerkleinerer/Schredder/Häcksl

1996

used

€36,000

Call

Mabe S-420/Shredder/Shredding machine - Manufacturer : Mabe - Type : S-420 - Year of manufacture : 1996 - working hours : 5527 original - gross vehicle weight : 17500 Kg - Engine manufacturer : Iveco - 6cylinder - Towing eye : 40mm - Chassis : Manufacturer : Doll 80km/h tandem 2circuit air brakes - Tires : 385/65R19,5 - Remote control On our Youtube channel you will find a video Mabe S-420 offers high throughput with low wear and low energy consumption. The Mape S-420 can be used for shredding...

Listing

Zuzenhausen

(dealership location)

7895 km

V800 Single Shaft Shredder

ZERMA Einwellenzerkleinerer ZERMA ZXS

new

Call

ZXS 1500 - 2x75kW - working cross section: 1500 x 1490mm ZXS 2000 - 2x90kW - working cross section: 1500 x 1900mm ZXS 3000 - 2x110kW - working cross section: 1500 x 2700mm ZXS series: The single shaft shredder for demanding shredding tasks. The machines are extremely robustly built and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. A wide range of applications for the ZXS series: Bmaayrtu Many other materials can be shr...

Listing

Stockport

7008 km

Genox V800

2023

new

Call

Genox V800 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Cjx9it3zut 37kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 800mm wide x 400mm diameter Rotor with 35pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is c...

Listing

Zuzenhausen

(dealership location)

7895 km

V600 Single Shaft Shredder

ZERMA Einwellenzerkleinerer ZERMA ZTS

new

Call

General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all...

Listing

Stockport

7008 km

Genox V600

2023

new

Call

Genox V600 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 18.5kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 600mm wide x 220mm diameter Rotor with 23pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Cjx89vzq2v Parameters can be easily configured on site to suit the materials being processed. Output size is...

Listing

Zuzenhausen

(dealership location)

7895 km

ZERMA Einwellenzerkleinerer ZERMA ZRS

new

Call

The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. Brquaeztl0 These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Th...

Listing

Zuzenhausen

(dealership location)

7895 km

ZERMA Einwellenzerkleinerer ZERMA ZPS

new

Call

ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Naoivg9l Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material ...

Listing

Zuzenhausen

(dealership location)

7895 km

ZERMA Einwellenzerkleinerer ZERMA ZIS

new

Call

GENERAL Typical of the single-shaft shredders of the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their steel-welded construction. The rotor diameter of 457 mm is also generously dimensioned. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: Drive via an oversized gearbox, reversible knives, bolted knife holders, robust external bearings, hydraulic screen basket, simple handling and technically sop...

Listing

Zuzenhausen

(dealership location)

7895 km

ZERMA Einwellenzerkleinerer ZERMA ZWS

new

Call

ZWS 600 - 18,5 kW Working cross section: 580 x 1280 mm ZWS 850 - 22 kW Working cross section: 860 x 1620mm ZWS 1100 - 22 kW Working cross section: 1140 x 1885 mm ZWS 1400 - 45 kW Working cross section: 1420 x 2195 mm ZWS 1700 - 55 kW Working cross section: 1640 x 2380 mm ZWS 2000 - 90 kW Working cross section: 1980 x 2380 mm ZWS 2600 - 2x75 kW Working cross section: 2540 x 2785 mm ZWS 2600/600 - 2x90 kW working cross section: 2540 x 3080 mm Rotor diameter with 600mm! Products made of wood and wo...

Listing

Zuzenhausen

(dealership location)

7895 km

ZERMA Einwellenzerkleinerer ZERMA ZHS

new

Call

ZHS 600 - 18.5/22 kW rotor diameter : 400 mm Working cross section : 520 x 470 mm ZHS 850 - 30 kW rotor diameter : 400 mm Working cross section : 800 x 820 mm ZHS 1100 - 37 kW rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Dxuiti Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS ...

Listing

ZERMA Einwellenzerkleinerer ZERMA ZWS 600 SMART

Zuzenhausen

(dealership location)

7895 km