Used pumps for sale (192)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Ndsdpfx Aszv Ibfodcjc Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Ndsdpjzc Npljfx Adcsc Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on the mode of operation "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request!

Year of construction: 2004, condition: used, functionality: fully functional, used peristaltic pump, make: Delasco Paris, model: PCM JZ 237, year of manufacture 2004. This pump is in our warehouse in Oradea, mounted on stainless steel frame. Technical date. the JZ237 model offers the following standard performance parameters: Pump Type: Low-pressure peristaltic / Slurry pump Maximum Flow Rate: 300 to 600 liters per hour or 7,6 m3/hours Maximum Pressure: 1.5 bar Engine 400 V with power 1,5 kW direct-drive electric motor mounted on a steel base frame. Attached you have the pictures. Ndodpez D U Ulsfx Adcsc This pump was making the liquid (milk and other liquids) transfers into a diary factory. This pump is sold with the pipes. Price 2.690 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Nedpfx Adez Di Nwjcjdc Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: used, NMNE 40 872 317 NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Inlet DN50 (± 400mm) Ndsdpfxez Rnzae Adcjc Outlet connection DN 30 (± 400mm) Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Ndedpfx Aeqabiaedcoc Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Ndsdpfsz Slq Nsx Adcoc Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Njdsrfdttepfx Adcsdc Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Condition: excellent (used), For sale: DDR motor pump. - 800 l/min - 28 hp - In very good condition. Ndsdpfx Adez Sk H Aecec

Condition: used, SCA Pneumatically Driven Piston Pump SCA PPK57-200P8-R-E Max. temperature: 100 °C Material pressure: 350 bar Capacity: 200 l Dimensions: 1050 x 650 x 2000 mm You can find more items – new and used – in our shop! Ndodpfxjwxw U Ao Adcsc International shipping costs available upon request!

Condition: used, SCA pneumatically driven piston pump Max. temperature: 100 °C Ndedewxw R Rjpfx Adcoc Material pressure: 350 bar Dimensions: H x W x D 2400 x 1200 x 800 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, pressure: 6 bar, 3 units Netzsch Nemo progressive cavity pumps. Shaft stainless steel. Housing steel. These refurbished standby machines come from the spare parts warehouse. They were intended for the delivery of calcium hydroxide suspension. Images are in order from left to right: 1. Photos 1-9 Green pump on the left NM 038BY02S12B (new, unused) 2. Photos 10-18 Grey pump in the middle NM 045BY01S08B (refurbished) 3. Photos 19-26 Blue pump on the right NM 038 BY (refurbished) Ndedpfx Aow I Hnijdcjc

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Ndedpfey Exqljx Adcsc Availability: immediately ex stock, inspection by appointment possible

Year of construction: 2008, condition: excellent (used), Applications : Nsdpfx Ademih Aajcsdc - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: - Easy to install and maintain. - Compact solution for residential and small collective use. - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Ndodpexg Nxaefx Adcsc

Condition: used, Year of construction: 2015, machine/vehicle number: B96628619P11545, volume flow: 90 m³/h, operating pressure: 25 bar, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,900 rpm, protection type (IP code): IP55, Used pump from a well-maintained system. Njdpfozb Ib Dsx Adcsdc

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 40 m³/h, centrifugal vertical cantilever pump chemical pump FIP ALPHA 65-40 V2CM year of construction: 2008 DN: 50 Nominal flow rate 40 m³/h Nominal head: 45 m p [track]: 16 T [°C]: -25 ÷ + 140 Turn number: 1470 Ndjdpeufhzpsfx Adcoc electrical power 16.5KW 400V 50Hz 34.7A engine speed: 1470 Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries length: 1700mm width: 700mm weight: 450 kg

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Ndedpfxoz Slpfj Adcec Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Year of construction: 2019, condition: ready for operation (used), A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible. Njdpfx Aowtg Hqedcjdc

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Njdpfjz A Avhjx Adcodc Worldwide shipping can be arranged.

Year of construction: 2008, condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 DN:50 Nominal flow 40 m³/h Njdpfx Adeh Rwbrscsdc Nominal head:45 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW 400V 50Hz 34,7 A engine speed: 1470 Execution: vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Year of construction: 1996, condition: used, machine/vehicle number: 7200124-01, For sale is a high-pressure pump from the company Abel, manufactured in 1996. Flow rate: 19 m³/h Pressure: 10.0 MPa Ndjdezwk H Topfx Adcjc Oil volume: 7.5 dm³ Stroke rate: 420 1/min The pump can be inspected upon request.

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 construction of year:2011 DN:50 Nominal flow 40 m³/h Ndodoh Rwafopfx Adcsc Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Year of construction: 1982, condition: used, mobile eccentric screw pump Additional title: Mobile moineau pump Position: on a mobile frame with wheels Features: drive, electrical switch box, DN50 connections Ndsdpfx Adozgcxmscoc

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation Ndedjz Slnzopfx Adcoc • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.