Used other waste management & recycling machinery for sale (91)

Year of construction: 2020, condition: used, Design: modular containerized system, process: continuous pyrolysis/thermochemical carbonization, reactors: 2, feedstocks: wood/landscape maintenance material/biomass, thermal output: approx. 150kW, biochar production: approx. 300t/year, operating mode: autothermal, flue gas recirculation: available, burner: FLOX, discharge: water-cooled and airtight, degree of automation: fully automatic, control: Siemens S7-300, operator panel: Siemens TP1200 Comfort, automatic mode operating hours: approx. 7069h. Process container dimensions X/Y/Z: approx. 9000mm/3000mm/2800mm, process container weight: approx. 14t, flue gas treatment container dimensions X/Y/Z: approx. 3000mm/3000mm/2800mm, flue gas treatment container weight: approx. 4t. Including Bruns walking floor container with approx. 30m³ dosing hopper, inclined screw conveyor, bagging station and conveying spirals. A drying system for wood chips is optionally available. Documentation available. An on-site inspection is possible. Prsdpfjz Hlwvex Abgeb

Year of construction: 2002, condition: good (used), 1. HKV lifting system operates from ground level. Capable of servicing four-wheeled containers ranging from 660 to 1,100 liters with flat lids. Year of manufacture: 2002 Color: blue Predpfoz Hbw Sex Abgsb 2. Lifting system operated from a ramp. Handles four-wheeled containers with flat lids, ranging from 660 L to 1100 L. Year of manufacture: 2013 Color: orange

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. Psdpszmqv Hofx Abgsrb It was operating 2-4 hours during test run. The whole system is in new state.

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 In very good condition. Prsdpoz Az Exsfx Abgsb Regularly maintained and in continuous operation until today.

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. The UC 120 B was manufactured in 2010 and completely overhauled in 2025. Podpfjz A R I Sex Abgsrb The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport.

Year of construction: 2022, operating hours: 500 h, condition: used, functionality: fully functional, machine/vehicle number: Gogeim TA08 Nr 1400, Gogeim TA 08 shot blasting machine #1400. Completely overhauled in 2022, including replacement of the metal belt, impeller, loading mechanism, shot feed hoppers, power panel, and air cleaning unit. Pjdpfx Abozy U Elegsrb Operational time was less than one year.

Year of construction: 2019, operating hours: 10,040 h, condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: TRX00694CDGK49XXX, SALVUE, on behalf of our client, is offering this Terex Finlay 694+ Supertrak Screener (year of manufacture: 2019) in defective condition. The machine has sustained impact damage. Pedszzk N Aspfx Abgorb If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Prodpowm Nd Eofx Abgsb

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Podozp H R Ejpfx Abgerb Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Dust control/high-pressure misting system 2 misting cannons, each with 30 nozzles Separate container with central unit, electrical system, IBC water tank, and high-pressure line. Prsdpfoz A Tcljx Abgob

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Prjdpfx Ajz Arh Njbgeb Weight: 1440 kg 1 year warranty

Year of construction: 2011, condition: excellent (used), The lifting and tilting device includes the undercarriage of the traveling carriage, the control cabinet, the vibrator, and the lifting and tilting device itself. Pedezwdn Rspfx Abgerb The centrifuge is not included in the scope of delivery. Performance specifications, including the centrifuge: Current: 59 A, Power: 28 kW, 50 Hz.

Year of construction: 2001, condition: used, functionality: fully functional, Compost turner BACKHUS 10.10. Predpjzudwtsfx Abgjb Diesel engine: 264 hp Weight: 14.9 tons

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Psdpfxjw Tir Is Abgorb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Prodpfx Abjzn N Udsgjb Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Loading system for automatic filling of 2 walking floor vehicles with loose waste/recyclables, consisting of a steel structure with maintenance platform, 2 traversing conveyors and one reversible conveyor, as well as optionally a chain belt conveyor for feeding from below. Conveying capacity approx. 200 m³/h. Prodpfxjylzm Ue Abgjb

Year of construction: 2010, condition: good (used), Air shower cabin for cleaning contaminated work clothing / personnel! Prsdpfx Aox I Nidebgsb The air shower is mounted on a pallet for transport with forklifts and also has a lifting eye for easy relocation with a crane or similar equipment. Power connection: 400 volts Loading or shipping is possible!

Year of construction: 2021, operating hours: 2,800 h, condition: excellent (used), Loading ramp, dimensions L x W x H: 10,000 x 5,000 x 950 mm in excellent condition, hardly used Prodpfxszffu Is Abgob very robust construction

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Prjdpfx Abszcyrwogeb Includes a complete service kit.

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), overall weight: 12,000 kg, fuel type: diesel, color: yellow, fuel: diesel, gearing type: automatic, emission class: euro4, loading space width: 2,550 mm, loading space length: 5,150 mm, loading space height: 3,100 mm, Year of construction: 2012, operating hours: 6,790 h, machine/vehicle number: 17.55.856, Backhus 17.55 windrow turner together with Backhus Hose Drum HD 63 for sale. Pedpfx Aboxmvlyogsrb The 17.55 Machine is fully equipped in great and working condition. Manufactured in 2012 and 6790 operating hours. The machine is sold together with the Backhus Hose Drum HD63 with 200 m long hose (Drum has never been used) which can be connected to the machine for spraying the compost rows. The HD 63 drum is operated automatically via the Bachus 17.55. On demand we can send aditional pictures. For further information please contact us.

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Prsdpfx Abezybumegob

Year of construction: 2011, condition: used, Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible. Psdpszyq T Eefx Abgorb

Year of construction: 2026, condition: like new (used), Big-Bag frame available in various designs Prjdpfxeztzhao Abgeb Big-Bag frame with crossbeam for crane/forklift or Big-Bag frame with jib and electric chain hoist

Year of construction: 2026, condition: like new (used), various vibratory conveyors / vibratory feeders Prjdpjzzdvvofx Abgob

Year of construction: 2008, condition: used, Two identical separating tables are available, screen width: 890mm, screen length: 1000mm, screen area per screening deck: 0.89m², number of screening decks: 1, number of outlets: 2 (light/heavy material), screen clamping: manual/pneumatic, dimensions with outlets: 1738x1287x1351mm, dimensions without outlets: 1140x1287x1351mm, weight: 700kg, an on-site inspection is possible. Psdpfszyq Txsx Abgsrb