Used mounting technology for sale (160)

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Machine location is EU. Ndodjxlqnyjpfx Adcjc Ask for additional information!

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Ndjdpfx Aetz Dkysdcec

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Nedpfjy Axcvex Adcsdc Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. If you have any questions or need further information, please do not hesitate to contact us by message or phone.

Condition: used, functionality: limited functionality, Various conveyor belts available – see photos. For sale both as a package and individually. Inspection possible at any time. Ndsdeyll Dwepfx Adcjc

Year of construction: 2011, condition: excellent (used), Essemtec Pantera XV Pick-and-Place Machine Year of manufacture: 2011 Excellent condition From small-batch production 0201 components Top-down image processing Nedpfjyxc I Ujx Adcedc Intelligent tape feeder (8 to 56 mm) Placement speed: 4,500 cph Easy-to-use graphical software Optical alignment “on the fly” Upward-vision system for component inspection Feeder package: 10 pieces 740i paper 8mm 30 pieces 740 blister 8mm 5 pieces 741 12mm 2 pieces 742i 16mm 10 pieces strip tape feeder

Condition: used, Additional information based upon request including photos. Nedpfxezuwqmj Adcjdc

Year of construction: 2012, condition: used, Operational condition PCB cleaning unit. Several available. Ndsdpjyup Sdsfx Adcoc Ask for photos and pricing

Condition: ready for operation (used), An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible. Ndjdpfow Snd Hox Adcec

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Ndodpfxovk R H Ro Adcsc

Year of construction: 2011, condition: used, Operational unit. Nodpfjyh Ha Nsx Adcodc Recently taken from the production!

Condition: used, more available, ESD tables and side tables, as well as equipment such as oscilloscopes, isolation transformers, etc. Price for one lab table with superstructure and one mobile pedestal Ndsdpfxjy I Uw Ts Adcsc

Year of construction: 2008, condition: good (used), Automatic unloading at the end of the line Ndedpfx Adoy Au Stscoc max. magazine size: 360mm x 360mm x 570mm min. PCB size: 80mm x 50mm transport height: 950 +/-20mm

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Ndjdsvfpmlepfx Adcoc Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Traceability package Ask for additional information!

Condition: used, EROWA UPC clamping system – pallet holder Nsdpfxszpxkdo Adcsdc ER 016093

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Ndedpfx Adsxrb S Njcjc

Condition: used, Year of construction: 2021, Machines in operational condition! Ndedpfx Adjwcrthecjc Ask for additional information!

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Ndjdpfowctn Hex Adcoc Ask for additional information!

Condition: used, Working condition. Ndsdezf H Icjpfx Adcjc

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder F2-44mm___1 piece Ndodpfxeww Etwj Adcec F2-32mm___2 pieces F2-24mm___4 pieces F2-16mm___5 pieces F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Feeder Stick____1 piece

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Ndsdpstz Dkaefx Adcec

Condition: used, Good day, I am selling a used ASYS MPS 100. The unit is fully functional and was used in an SMT production line for both SMD and THT assemblies. If you are interested or have any questions, feel free to contact me. Ndsdeww Ewvspfx Adcjc

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Nedjwb E Sbopfx Adcodc

Year of construction: 2016, condition: not inspected (used), Current hours on tube 3560 (20.000 total lifetime of the tube) PCB width max.: 450 mm x 400 mm Inline X ray + AOI Working condition to our best knowledge. Ndedpeu E Icvsfx Adcsc Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Year of construction: 2008, condition: excellent (used), functionality: fully functional, For sale is a 6-axis placement robot from Erowa, this was used to load 2 die-sinking EDM machines from Ingersoll, both with tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package Technical data: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m Nsdpfstdrkqox Adcodc Disassembly, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: not inspected (used), Year of construction: 2010, Machine is operational to our best knowledge. Has integrated cooling system and auto width adjustment. Nodpou E H R Eefx Adcedc Ask for further details! Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!