Used mounting technology for sale (150)

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Iijdpfx Aoxbp Nbsf Ssk

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Iedpfsw Uk Aqsx Af Soik

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Iisdpfx Afew Ty Hco Sok Ask for specification!

Year of construction: 2017, condition: used, functionality: fully functional, 1 pc. JUKI KE 3010 AL Pick & Place with feeder trolleys 1 pc. JUKI KE 3020 VAL Pick & Place with feeder trolleys Available feeders: 8 x 2mm pitch* 140 pcs. * Types: CF05HP and CF03HPR Iiodpfx Afow R Ulbj Sok 8 x 4mm pitch * 240 pcs. Types: CF081E 12mm 30 pcs. * FF12FS 16mm 30 pcs. * FF16FS 24mm 14 pcs. * FF24FS 32mm 3 pcs. * FF32FR-OP 44mm 4 pcs. * FF44FR-OP 56mm 1 pc. * FF56FR-OP If you are interested, we are available to answer your questions at any time.

Year of construction: 2023, condition: good (used), Nutec Tensert 2503 variant M2 Key parameters: • Adjustable PCB width: 30–250 mm, adjustable via screw mechanism • Max. PCB length: 330 mm • 50 slots: 3 mm deep, 5 mm wide, 10 mm pitch Ijdpfxjw Hp Ans Af Seik • Stackable & reversible (long or short edge) • Material: conductive polypropylene (ESD safe) • Temperature resistance: up to 130 °C • Dimensions: approx. 354 × 320 × 563 mm • Weight (with locking system): approx. 6.5 kg • Transport lock system included

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Iedsv Inw Uepfx Af Soik Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Year of construction: 2009, operating hours: 500 h, condition: like new (used), functionality: fully functional, This 2009 machine has worked around 500 hrs. It looks and smells like almost new. Belt conveyor. Ideal for portotyping and/or glue curing Ijdpfx Afswiwz De Soik

Condition: ready for operation (used), An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible. Isdpfxew Snd Ho Af Soik

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Iijdpjvk R H Rsfx Af Sjk

Year of construction: 2006, condition: excellent (used), functionality: fully functional, FUJI AIM flexible placer with MFU feeder cart 4 placement heads (H12 S- H12S- H04- H01) Iiodjw Rz Trspfx Af Sok Tray Unit L Type approx. 3,200 operating hours / demo machine Inspection possible by appointment

Condition: good (used), functionality: fully functional, Year of construction: 2014, In-Line Series Specifications PowerSpector FDAz 350L Maximum PCB Size: 350x250mm (13.8"x9.8") 650x550mm (25.6"x21.6") Characteristics Product type: Automatic Optical Inspector Iiodowuypuspfx Af Ssk Inline/Offline: In-Line Camera movement: X + Y direction PCB movement: Stationary during inspection Parts inspection: Presence, Polarity, Offset, Correctness, Soldering Printing/paste inspection: Offset, Smearing, Bridges, Uniformity Image Processing: Synthetic Imaging, Spectral Analysis, Greyscale limits Image Parameters: Brightness, Hue, Saturation via Filters Camera type: Digital color with CameraLink Camera Field Of View/Resolution: 36x20mm/18.75μm or 19.2x10.8mm/10μm Lens: Telecentric lens with built-in prism for DOAL lighting Lighting system: Omnidirectional Triple LED rings: Side, Main, DOAL (Diffused On Axis Lighting/Coaxial) Specifications: Minimum inspection component size: 01005" (0.4x0.2mm) (10μm resolution) Positioning accuracy: Pixel-related Feedback Loop Component clearance (top): 30mm (1.2") Component clearance (bottom): Maximum PCB Size: 350x250mm (13.8" x 9.8") 650x550mm (25.6" x 21.6") Movement speed: 720mm/s Inspection capacity (typical): 1500ppm Electrical requirements: 100-240 VAC / 330W Conveyor: Conveyor belt speed: 10-500mm/s (0.4-19.7"/s) Conveyor configuration: Left>Right, Front rail fixed, Height 830-950mm PCB Clamping: Top Justified, Ruler Blade, Top & Edge Clamping, Sensor Stopper Minimum board size: 50x50mm (2.0" x 2.0") Board thickness: 0.6-2mm (option 0.6-4mm) (24mils - 79mils) PCB warpage compensation: Automatic PCB support Lift with magnetic pins (option) Interfacing: Control PC type: Apple Mac (Intel) with Mac OSX Control interface: USB / SMEMA (conveyor) Data interface: CameraLink General: Operating temperature: 15-30°C (60-90°F) Operating humidity: 15-80% RH External size: W740 x D786 x H1236 (29.1" x 30.9" x 48.7") W1040 x D1077 x H1270 (40.9" x 42.4" x 50.0") Weight: 180kg (397lbs)

Condition: used, Good day, I am selling a used ASYS MPS 100. The unit is fully functional and was used in an SMT production line for both SMD and THT assemblies. If you are interested or have any questions, feel free to contact me. Iedpsww Ewvjfx Af Sjik

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, NUTEK NTM310IXL Inverter (FLIP) unit. 2018. Looking very very good. Iisdpevtpfdefx Af Sok

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Iijdpfxjtz Dkas Af Ssk

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 Ijdjv Ta Hlspfx Af Ssik 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Convection heating

Year of construction: 2004, condition: ready for operation (used), Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible. Iiodsvft Rbopfx Af Sok

Year of construction: 2012, condition: ready for operation (used), An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible. Iodpfewf Nywjx Af Soik

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Ijdpsud Svzofx Af Sjik

Year of construction: 2005, condition: ready for operation (used), The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible. Iisdpfx Afsttmp Te Ssk

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Isdetz Dkyepfx Af Soik

Year of construction: 2019, condition: ready for operation (used), Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible. Iiedouhqchopfx Af Sjk

Year of construction: 2017, condition: ready for operation (used), Transport height range: 800mm-1000mm, buffer capacity: 10 blanks, blank length range: 70mm-460mm, blank width range: 50mm-460mm, blank thickness range: 0.3mm-3mm, max. individual blank weight: 2kg, max. total blank weight: 20kg, cycle time (FIFO): less than 15s. Machine dimensions X/Y/Z: approx. 1150mm/1400mm/1550mm, weight: approx. 400kg. Documentation available. On-site inspection is possible. Isdjwzlfzspfx Af Soik

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Isdotz Di Nepfx Af Sjik

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Isdswb E Sbjpfx Af Ssik

Year of construction: 2005, condition: ready for operation (used), Text: Heating zones: 7, transport width: 400mm, transport speed: 1500mm/min, nitrogen consumption at 250°C: approx. 15m³/h, nitrogen purity: 99.999%, cooling zones: 2, machine dimensions X/Y/Z: approx. 3300mm/1400mm/1500mm, weight: approx. 2000kg. Iedpfx Afjud Svue Seik