Used Extruders & extrusion lines for sale (231)

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine Dsliteuhpiyech Rokl

Condition: used, Year of construction: 1998, Single screw extruder Doloubu Izoitch Rekl

Condition: like new (used), Year of construction: 2023, power: 255 kW (346.70 HP), ø 5-50 mm; 30 m/min 1.5 Kw Core diameter 400-1100 mm, collar width 100-400 mm. Many extras Dslitcheuu H Eme Rokl

Year of construction: 2007, Condition: good (used), TECHNICAL DATA Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW Doliteqk T Dijch Rskl approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h

Year of construction: 2001, operating hours: 55,378 h, Condition: ready for operation (used), machine/vehicle number: 15, SINGLE SCREW EXTRUDER ME90/4 x 25 D - used machine, checked and ready for operation - open frame construction with spur gearing and directly flange motor - DC-drive 50 kW - screw speed max. 38 rpm - 1-part cylinder, smooth with water-cooled entryzone - 6 heating and cooling zones - 1 flangeheating zone - 5 die heating zones, without heater Dkjlisu Tgqxjtch Rel - die connection incl. heater band - electrical cabinet mounted on operation side * incl. short interruption device 0,5 sec. - additional Sockets * 1 CEE-socket 5-pole 400V, 32A * 2 Schuko-socket 230V, 16A - temperature controller type KS40, with self-optimisation - operation panel swivelling - melt pressure and -temperature measuring incl. 2 probes 1/2" - 20 UNF - hopper 100L with 3-pos. svievel mechanism - incl. screw for processing PVC-U granule * nitrided , polished and hollow bored - incl. screw tip tempering system * incl. oil tempering unt

Year of construction: 1981, Condition: refurbished (used), Functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Dkeliteu Ttf Noch Rel Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 2000, operating hours: 30,500 h, Condition: refurbished (used), - Type : CINCINNATI TITAN 68 - Year : 2000 - Conical screws - Analog controls Dkeliteigrb Doch Rjl - Screws & barrel : In good conditions - Flow rate: 250kg/h - Good general state We are able to supply all spare parts if required and provide on-site maintenance.

Condition: good (used), Year of construction: 2013, Main Extruder / Co Extruder Dkolijubuzbetch Rel

Year of construction: 2007, Condition: used, ø 90-250 mm All WZ from 90-250 mm SDR 17, SDR 11 incl. acc. to EN 12 201, DIN 8074-75, ISO Djlitceubbqcjh Rskl

Year of construction: 2006, Condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Delitcjpaiaieh Rskl Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2013, Condition: ready for operation (used), machine/vehicle number: 248, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - mounting platform 3950mm x 700mm - motorized length adjustment 500mm - motorized height adjustment 875 - 1025mm - manuell cross adjustment, 50mm - 2 vacuum pumps - 2 manifold with each: * 20 water connections 1/2" Delitou Tgrvech Rjkl * 20 vacuum connections 1/2"

Year of construction: 1980, operating hours: 36,000 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Dslitovuquvsch Rekl

Year of construction: 2019, Condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Dkelitcevlxufeh Rel Year: 2019 Model: PRP-500

Year of construction: 1990, Condition: used, Twin screw extruder Dkelitoubuywech Rjl

Year of construction: 1998, Condition: not inspected (used), ø 160-400 mm Various tools included Dkolitchjubbc Se Rsl

Year of construction: 2011, Condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Dolispah U Tjtch Rskl Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 1996, Condition: ready for operation (used), machine/vehicle number: 455, HAUL-OFF UNIT ME 30/4 - used machine, checke and ready for operation - 2 DC drives 1,1 kW each - haul-off speed up to 50,0 m/min - contact length approx. 800 mm - pneumtic clamping * weight compansation for upper haul-off carrier * compansation tank for pressurized air - 2 haul-off belts 75 mm wide - protection cover mit Folding door, endschaltergesichert, * without inlet protection tunnel - control panel with 12 m connection cable - incl. short interruption device Dslitcou Tgr Noh Rskl

Condition: good (used), Year of construction: 2003, Functionality: fully functional, The Kramer feeder for dosing bulk materials into the extruder. Motor driven by the FC, can be controlled from main extruder by CAN-open. Adjustable supporting leg. Dolitovkcwnech Rskl

Condition: ready for operation (used), Year of construction: 1997, operating hours: 100,000 h, Functionality: fully functional, machine/vehicle number: 906100010011301, input frequency: 50 Hz, input current: 400 A, working width: 1,000 mm, Automatic extruder for the production of fibres, with the possibility of mixing in granulate raw materials and additives (sizing, stabilising, etc.). Equipped with extruder screw with 100 mm diameter, 32 L/D barrier zone, hydraulically operated filter changer (for continuous operation) and 1000 mm width head unit (wide die). Equipped with a cooling roller and a cutting unit for slitting film strips of the desired size to ensure the solidification of the produced film. Heat-insertion stretching chamber between slow and fast running rollers for stretching the foil strips in 15 rounds. The surface of the stretched foil strips is provided by a needle fibrillation unit. The finished fibrillated film filaments are wound on a 16-unit automatic filament winding stand. Dslou Rnv Tjitch Rokl

Year of construction: 2011, Condition: good (used), Single screw extruder Djlitchjubux Ts Rjkl

Year of construction: 1992, Condition: ready for operation (used), machine/vehicle number: 154, CALIBRATION UNIT ME16/6.2 - used machine (IDE-Technikum), checked and ready for operation - base frame 3,0m long - mounting platform 2500mm - manuelle length adjustment, with handwheel - manuelle height adjustment, with ratchet Dkelitceu Tgr Ash Rjl - manuell cross adjustment, with hand wheel - 2 vacuum pumps - 2 manifold with each: * 10 water connections 1/2" * 10 vacuum connections 1/2"

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, screw diameter: 38 mm, Selling due to a closure our WPC/PVC profile extruder manufactured by Cincinnati-Battenfeld Austria. YOM 2011, model Fiberex K38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 15 kW (AC), screws and barrel TC coated, horizontal material dosing feeder, double degassing filter. The extruder is designed as a co-extruder for WPC profile production on a adjustable column, but could be used as stan-alone as well on a own basement, has own control cabinet and remote control. Processing unit can be re-set for other product and/or type of plastic. Low running hrs. Dslitot U Iy Eech Rekl The extruder is in good working condition, could be demonstrated on-site by appointment. Many optional peripheral equipment upon request.

Year of construction: 2007, operating hours: 450 h, Condition: as good as new (ex-display), Corrugator (without tools) suitable for pipes up to 315 mm Djlitchsmn Iczs Rokl Manufacturer: Fränkische Type: FDC 315/36V Year: 2007 (never used) Technical basic data: Max. Product diameter: 315 mm Number of mould blocks: 36 Electric: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial no.: MV-2034 Operating hours: 450 h / only mechanical Condition: very good, never used in the production, only for mechanical demonstration.

Condition: used, Functionality: fully functional, machine/vehicle number: 460, Year of construction: 1997, EXTRUDER ME 45/3x25D - used machine, function tested - DC drive 14 kW - Screw speed 8-85 min-1 - Cylinder, one-piece, with water-cooled feed zone - 4 cylinder heating/cooling zones with 4 air blowers - 1 flange heating zone, incl. heater band - 3 mould heating zones, without heating elements - Three-point temperature controller type KS 40 with digital display, self-optimisation and error message - die connection in special design with external thread M 85 x 2, designed for melt pressure and temperature temperature measurement Mass pressure and temperature measurement - complete with 2 separate measuring probes - digital display units - incl. 2 blanking plugs Hopper - capacity approx. 60 litres Dkjlitcetx Av Rsh Rel - swivelling mechanism 1 Screw ø 45 mm x 25 D - 3-zone screw for processing Polyamide as per drawing 22501850 - Output capacity approx. 8-35 kg/h (depending on mould design) - Nitrided, polished and hollow drilled - Screw tip suitable for mould connection

Year of construction: 2011, operating hours: 25,000 h, Condition: good (used), Functionality: fully functional, Selling due to a closure our WPC/PVC profile extrusion line consisting of: 1) Main extruder: manufactured by Cincinnati-Battenfeld in 2011, model Fiberex T80, twin-screw, conical, counter-rotating, screw diam 80mm, motor 78 kW (DC), screws and barrel TC coated. The Extruder is designed for WPC profile production but could be re-set for other product and/or type of plastic. Low running hrs. 2) Co-extruder: manufactured by Liansu in 2011, model LSE-38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 11 kW (AC), screws and barrel TC coated, horizontal dosing feeder, double degassing filter, has own control cabinet, able to run synchronic with main extruder or stand-alone. 3) Calibration table: manufactured by Liansu in 2011, model LSFZ-150, calibration length 6m, SS water bath, water joints 48, vacuum joints 36, adjustments up/dwn, left/right, body dimensions 6000×1100×1200mm Dkoljt U Ixzsitch Rjl 4) Haul-off unit: manufactured by Liansu in 2011, model FQG-150, double caterpillar track driven by 2x 2.2 kW AC motors, hauling size 200mm (W) x 2450mm (L), speed range 0.34～6.75m/min adjusted by Danfoss inverter. Machine combined with cutting saw (diam 500mm) unit, cutting height 100mm, precision cutting length adjustment by controller. 5) Stacker: YOM 2011, pneumatic discharge, length 6m. The line is in good working condition, could be demonstrated on-site by appointment. Optional equipment: vertical Kramer-feeder for pulp materials (made by Cincinnati), Movacolor doser, pneumatic material auger, replacing the co-extruder by Cincinnati K38, etc.etc.