Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions:790/710/H790 mm Dkolq Ignov E D E Nstjl -Weight: 104 kg

Condition: used, From the authority Shaft bearing replaced Test run Used, good condition Make: Krämer Type: VKA-GR 2 Dolq Ignowabi Hstjkl Machine No. 75/007 Motor: 7.5 kW Connection diameter: 350 mm Pressure pa: 2500 m³/h Air flow rate: 7800 m³/h Steel impeller Belt drive Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen without guarantee or warranty

Condition: excellent (used), Functionality: fully functional, total height: 2,700 mm, total width: 7,500 mm, total length: 2,700 mm, type of input current: three-phase, 3-bag sawdust extractor 4.0 kW Specification: • condition - used, ready to work • main engine 4.0 kW • capacity approx. 6,000 m3/h • sawdust inlet fi 250 mm • 3 bags with a diameter of 500 mm (reduced to 400 mm) • 3 new filters with a diameter of 58 cm and a height of 120 cm • galvanized sheet metal extractor • overall dimensions 275 x 70 x 270 cm (length x width x height) Additional information: Dkjljwbptisq Igntel • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: used, Year of construction: 1999, Dimensions (L/W/H) 3500 x 3500 x 6000 mm Filter capacity 216 m² Number of filters 121 (11x11) St. From the closure of the window construction company ----- Nestro filter system with various fans Automatic shaking-extinguishing line including Heizomat feed for wood chips with transport to the silo ----- Info: Outside: Intermediate filter, Heizomat, fans and pipes must be dismantled by yourself. Switch cabinets (fans, control, Heizomat feed) already disconnected by electrician and ready for shipping. Dimensions approx.: Dolqev Htkko Igntjkl ----- Filter system: upper part: length 3.4 m x depth 3.4 m x height 3.0 m lower part: length 3.0 m x depth 3.0 m x height 1.9 m adjustable feet: height approx. 0.9 m filter hose length probably 2,500 mm filter area probably 216 m2 heating system feed length 3.8 m x depth 1.4 m (technical information according to manufacturer - no guarantee!

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobile EA160A Ø suction 160 mm Dolq Ijrbiiwjgntekl Year of construction 2006 Weight 310 kg Nominal volume flow 2050 m³/h Minimum volume flow 1447 m³/ 3 kw Automatic cleaning

Condition: used, Year of construction: 2007, 2 fans / blowers Manufacturer: Lammers Dolq Iev T Tucjgntokl Year of manufacture: 2007 Type: LAF 830 / 154 - 627 / 2 with 22 kW drive

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Dslq Igjt Hy Uljntokl -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

Condition: used, From the authority Shaft and motor with new bearings Used, good condition Make: Krämer Type: VKA-GR 1 Mach. No. 75/007 Motor: 5.0 kW Connection diameter: 300 mm Pressure per year: 2100 m³/h Air flow rate: 6750 m³/h Steel impeller Belt drive Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen Dslq Ignswabiystjkl without guarantee or warranty

Condition: good (used), Functionality: fully functional, total height: 350 mm, total width: 110 mm, total length: 405 mm, type of input current: three-phase, bolt circle diameter: 400 mm, Sawdust extractor 4 bags 7.5kW Specification: • condition - used, ready to work • turbine engine power - 7.5 kW • bag shaking mechanism (control cabinet, timer) • turbine inlet - fi 400 mm • filtering surface: 48 filter bags 20x165 cm • efficiency - approx. 8-9 thousand m3/h • galvanized sheet metal body with the possibility of sealing and mounting outside • collection bag diameter - 4 x 600 mm • dimensions - 405/305 x 110 x 350 cm (length/length without turbine x width x height) Additional information: • good, factory technical condition • the photos presented show the actual condition of the subject of sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT Dkjlqjwbpqus Igntol

Condition: used, No. 04451 Dolq Ievxkt Hsgntokl Raw air extraction system Holzkraft ASA 3 Used, as new Stationary chip extraction system with collection bags Large collection volume Suitable for wood chips, plastic, metal, glass, polystyrene, paper, etc. Manufactured in Germany under CE guidelines Nominal volume flow 2500 m³/h Volume flow max. 3300 m³/h Connection nozzle Ø 200 mm Negative pressure max. 2900 Pa Filter surface 3 x 2.2 m² Type 1, suitable for extracting combustible dusts of dust explosion classes St and St 2 in zone 22 Motor power 3.0 kW / 400 V / 50 Hz Dimensions (assembled) 2486 x 578 x 2115 mm LWH Star-delta switch and connection cable with plug Including 3 collection bags and 3 filter bags Transport in disassembled condition Transport dimensions approx. 2500 x 800 x 600 mm LWH Weight approx. 120 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Delivery terms: ex warehouse or location

Condition: used, Year of construction: 2023, suction connection diameter: 250 mm, 5000 m3/h flow rate, nominal volume flow 3540 m3/h, negative pressure at the total connection at 20 m/s 2500 Pa, powder extinguishing device, version with rotary valve instead of chip box, power and speed adjustment by negative pressure measurement, additional 45% conveying possible Dolq Igsunva Tjntekl

Condition: good (used), Functionality: fully functional, power: 11 kW (14.96 HP), 11 KW motor Dslq Iov Exlkegntskl Pipe connections Ø 250 mm

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, Dedusting system Made by Riedex Type DM-300 M-B Exhibition machine - was never in production! (year of construction 2023) Dkjlq Ignjphp Uhjtel Motor power: 7.5 kW Nominal volume flow 20 m/s: 5089 m3/h Max. air volume flow: 6000 m3/h Filter area: 31.8 m2 Filter cleaning: motorized Dust collection volume: 480 liters Suction nozzle with shelf: 300 mm on the right-hand side With extinguishing device with powder (no water connection required) Dimensions incl. extraction nozzle: approx. 3485 x 1030 x 2595 mm (transport height approx. 2075 mm) + 1 pallet 1200 x 800 x 1200 mm Weight: approx. 780 kg Available from stock.

Condition: good (used), Hepa fine dust filter insert for clean air dust extractor with warning light with inserts H 13 (especially for GRP dust etc.) 710 x 710 mm Dolq Ignev A S Dujtokl 1120 mm long 830 mm wide 1000 mm high

Year of construction: 2025, Condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Delq Iefyadbjgntjkl The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: good (used), Year of construction: 2007, inlet: 250 mm, Dust extraction,sawdust extraction,self-cleaning vacuum pneumatic filter Alko Mobil JET 250 Dkeljqwyafjq Igntel Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Ideally suited for wide-belt grinders and all kinds of dry dust in various technological processes. 6.5 Kw fan Capacity 4900 m3/h Vacuum 2740 Pa Spigot diameter 250 mm Air return Technical documentation included

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: PR 250 L, input voltage: 400 V, power: 250 kW (339.91 HP), operating pressure: 6 bar, heating capacity: 250 kW (339.91 HP), nominal heat output: 250 kW (339.91 HP), pressure: 6 bar, Equipment: type plate available, Wood chip hot water industrial boiler Polytechnik 250 kW Currently still in operation, available from June 2025 - self-dismantling is encouraged and recommended. Dkslq Igev Up D Nsntol Room extraction is not included.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, type of input current: three-phase, negative pressure: 2,500 Pa, total height: 3,000 mm, total width: 1,500 mm, total length: 2,500 mm, nominal flow rate: 5,000 m³/h, intake manifold diameter: 250 mm, briquette diameter: 60 mm, Extractor features: Power: 5.5 kW Connection diameter: 250 mm Max. flow: 6200 m³/h Djlqov T T Nge Igntjkl Residual dust content: < 0.1 mg/m³ Including extinguishing system FBP60 briquetting press features: Power: 7.5 kW Briquette diameter: 60 mm Overall dimensions: Height: 320 cm, length: approx. 220 cm, width: 130 cm

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Dkjlq Ijv Svc Hegntel

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200mm maximum vVolume flow: 3200 m³/h nominal volume flow: 2262 m³/h volume flow monitoring: pressure difference display Negative pressure: 2250 pa Dkslok Utq Ijq Igntjl Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 db Chaff bag volume: 320 l Filter cleaning: mororic Engine power: 4 kW machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 385 kg

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 798 m², negative pressure: 4,300 Pa, overall weight: 21,000 kg, suction capacity: 105,000 m³/h, Central dust removal system, sawdust extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various technological processes. The device is like new - never used. Nestro JET 11557 self-cleaning bag filter Year of production - 2021 Dkolq Ignev E Hxlotol Filtration area - 798 m2 built-in 5 pcs. of fans with a power of 30 kW each Device efficiency - 105,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 21,000 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Delqov Svcys Igntokl

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 1,848 m², negative pressure: 4,300 Pa, overall weight: 16,000 kg, suction capacity: 63,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 year of production - 2021 Dkslq Igev E Hmijntel Filtration area - 1848 m2 built-in 3 fans of 30 kW each Device efficiency - 63,000 m3 / h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 16000 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: like new (used), Year of construction: 2021, filter area: 1,568 m², suction capacity: 42,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 Dkslq Iov Ewmgsgntsl year of production - 2021 Filtration area - 1568 m2 built-in 2 fans of 30 kW each Device efficiency - 42,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 12,500 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Djlqsip Nqkj Igntekl Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m