Used carpentry machines for sale (53)

Condition: new, Year of construction: 2026, functionality: fully functional, Gehrungs-Kapp u. Schiftersäge Graule ZS 170 N Baujahr 2025 3 KW links u. rechts schwenkbar 60° u. 45° links neigbar bis 45°, nach rechts bis 25° mittels Handkurbel von hinten 1 Maschinenständer 1 Sägeblatt 6000mm Ablängrollenbahn mit Skala u. Anschlag, Anbauseite links Njdpecyd N Hjfx Alfjlf 4000 Zufuhrrollenbahn, Anbauseite rechts viele diverse Optionen auf Anfrage

Condition: used, used, excellent condition, lightly used Manufacturer: Mafell Model: MKS 165 E CE type-certified Motor: 2.7 kW Njdpfxsycxhke Alfslf Brake motor Cutting height: 165 mm Blade diameter: 410 mm New price approx. €4,000.00 Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as seen in current condition, without guarantee or warranty

Condition: used, Schmid swiveling assembly table 12x3 m with longitudinal rollers, device without hydraulic unit Nljdpfxjy Afp Aj Alfsf

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers Nledpfxsx Igzqs Alfef - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Nledpfen R A Ewex Alfjf Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: ready for operation (used), Year of construction: 1999, Frame sander, brand "BARBERÁN". Nledpsxcxv Hjfx Alfof

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. Nedsh Ayyqspfx Alfslf You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Nodpfx Aexq Rrcslfjlf

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, nominal power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, feed length X-axis: 12,000 mm, feed length Y-axis: 420 mm, feed length Z-axis: 200 mm, cutting width (max.): 420 mm, cutting length (max.): 12,000 mm, table length: 13,000 mm, We offer this ready-to-use Weinmann WBZ150 woodworking machine, manufactured in 2004. Manufacturer: Weinmann Model: WBZ150 Year of manufacture: 2004 Condition: ready to use Category ID: 155 Type ID: 2716 Type: woodworking machine Nodpfoy Uuvijx Alfelf Used for processing beams and wooden structural elements – cutting, milling, drilling, and notching. The saw has new gearboxes, units, and a belt for the feeder. Technical data of the saw: Max. length of the workpiece (X-axis): 12,000 mm. Max. width of the workpiece (Y-axis): 420 mm. Max. thickness/height of the workpiece (Z-axis): 200 mm. Main spindle/circular saw: power ~ 7.5 kW with a vector drive (C-axis) Tool magazine: automatic tool changer with 12 positions. CNC control based on PC with Windows system; Length of the infeed and outfeed table: 13 m If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), EMME ELLE POLISHING LINE, MODEL: L.B.A.1350, USED Nodpfx Aljhkndmefelf WORK TABLE: 1,350 x 3,200 mm. 4 oscillating rollers with a diameter of 350 mm + 4 polishing pads with a diameter of 180 mm. Automatic wax spraying system using high-pressure pneumatic spray guns. Work table lowering system with a 5.5 kW motor. CE compliant.

Year of construction: 2007, condition: excellent (used), AUTOMATIC BENETA VENUS BANDSAW – USED Nljdpfxjhknb Dj Alfef Beneta Venus model bandsaw for cutting curves and straight lines, automatic with an outfeed table – used. - Vertical axis X: 1600 mm - Vertical axis Y: 450 mm - Maximum speed of axis X: 50 m/min - Maximum speed of axis Y: 50 m/min - Total installed electrical power: 6.5 kW - Maximum installed pressure: 6-7 bar - Brushless motor, axis X: 6 Nm - Brushless motor, axis Y: 2.3 Nm - Digital control - Standard cutting length: 0-1500 mm - Standard cutting height: 0-120 mm - Cast iron flywheels diameter: 800 mm - Bandsaw blade dimensions: Minimum length 5330 mm, maximum length 5350 mm, minimum width 13 mm, maximum width 20 mm - Motor power: 7.5 HP - Machine dimensions: 3,900 x 3,500 x 2,500 h, weight 4,650 kg

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° Nodpfx Aloivaryofelf • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Nodpfxsxwkuqo Alfjlf Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek notching saw JS400C is designed to create notches at the end of wooden pieces, for example, to insert a bracing beam into upright posts. The machine pneumatically clamps the wood and makes two cuts with the two 400 mm diameter saw blades. The maximum length is 380 mm, and the cutting depth can be adjusted up to 115 mm. The saw can be operated quickly and easily using a foot pedal. Functional description The wood to be notched, e.g., a post, is pushed into the covered saw slot until it reaches the set stop. The overhanging end is placed on a roller stand (not included). The foot pedal activates the pneumatic clamping of the inserted wood and initiates the sawing process. Technical description • Notching depth: 30 - 115 mm • Notching lengths: 10 - 380 mm • Wood thickness: 30 - 70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5 - 0.8 MPa (5 - 8 bar) • Saw blades: HM 400/30-3.5/2.5/40 Safety The saw is well-protected against accidental contact by means of a cover plate. When the cover is opened, the electrical power is automatically cut off, which minimizes the risk of injury. Advantages • Makes notching/cutting efficient and precise • Flexible and easy to set up • Easy to operate • The adjustable working height and the option to operate the machine with a foot pedal ensure ergonomically correct working conditions for the operator. Njdpfx Aod Arwhslfolf

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing Nlodpfex Tdtnex Alfef open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Nlsdpexv Arxjfx Alfof Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing Nledpfeduub Uex Alfof - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nljdpfx Aljykqxdofef Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Nsdpfxjfg Tatj Alfolf Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: Nlodpfxe Nn Hyj Alfef • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: WMD 10 404. M80, We are offering this used Weinmann WMD 10 system for the production of roofs and ceilings, year of manufacture 2003. Model: WMD 10 Serial number: 10 404.M80 Year of manufacture: 2003 Comprising: - Multifunction bridge (1x saw, 1x stapler) as well as LatTeq system (automatic batten placement and 2x nailing devices) - Roof/Ceiling table, 12m in length, with 4 NC axes and 5 clamping pairs each (clamping capacity up to 2.5m wide) and foldable rollers (not driven) - Assembly table, 12m with clamping system (2x) and foldable rollers (not driven) - Butterfly turner The fastening devices are not included in the sale. Njdpfsy N S I Sjx Alfslf The system will remain operational until approximately mid-June and can be inspected at any time by arrangement. If you have any questions, please feel free to contact us. Kindly send us a short message including your contact details.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 6,100 mm, total width: 3,600 mm, BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house factories. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines. TECHNICAL DATA -> Working table length: 6000mm; other lengths available on request: 3.0m; 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12m; 13.5m; 15.0m -> Working table height: 700mm (adjustment +/- 50mm) -> Working table width: 3600mm (adjustable) -> Height range for prefabricated wall using SD-01 clamping cylinder: 600-3400mm -> Vertical locking pins: 120 - 200 mm (35 mm diameter) Njdevv Rv Aspfx Alfelf -> Horizontal transport of finished elements (Optional): Set of pneumatically lifted rollers - 2 lines at the edges of the table -> Table drive: Stationary table -> Pneumatic power supply - 8 BAR for ER-02R version (with rollers for horizontal transport) -> Maximum permissible load - 1m2 of finished prefabricated element (assuming max height of 3000mm): 100kg / 1m2 OPTIONAL EQUIPMENT 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers with table surface (2 lines of rollers) The ER-02 stationary assembly table is a universal workstation for prefabricating elements in a wooden frame structure. The modular design of the work platform is designed to allow expansion and connection with other rotary tables to create a complete production line. The stationary assembly table is available in lengths from 3m to 15m, with a standard working area width of 300cm + a 60cm long steel support, allowing for the prefabrication of elements up to a maximum height of 340cm using SD-01 clamps.

Condition: new, Year of construction: 2026, operating hours: 1 h, working height: 700 mm, total length: 9,000 mm, total width: 3,600 mm, BOOSTON MACHINERY – European Manufacturer of Machines Our company specializes in manufacturing machinery for the prefabrication of timber-framed houses. With years of experience in the design and prefabrication of residential buildings, we create production lines for small, medium, and large enterprises producing timber frame walls, floor systems, and roof panels. This listing offers the ASSEMBLY & ROTATION TABLE ER-01H with a length of 9 m (other lengths available: 6.0 m; 7.5 m; 9.0 m; 10.5 m; 12 m. The modular design allows for table extension, e.g., from 6 m to 9 m, in increments of 1.5 m). The ER-01H tables can be expanded with a second wing (control and hydraulic pump are prewired and ready to connect the second wing). TECHNICAL DATA: -> Working length: 9,000 mm -> Working height: 700 mm -> Working width: 3,600 mm -> Prefabricated wall height range with SD-01 clamping cylinders: 500–3,400 mm Nodpfxsy Iqk No Alfolf -> Adjustable vertical pins: 120–200 mm (40 mm step) -> Pre-drilled for SD-01 clamping cylinders -> Horizontal transport for ER-01H-R variant (optional): 3 rows of pneumatically lifted rollers (8 bar) -> Table drive: hydraulic -> Control: control panel -> Maximum load capacity: 2,500 kg (for 9 m table) ADDITIONAL OPTIONS: 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers (3 roller lines) 3. Set of roller pins for vertical transport The single-wing ER-01H rotary table is a versatile workstation for the prefabrication of timber frame walls. ER-01H tables can function as standalone workstations or be integrated as a base/central/final station in a production line. ER-01H tables can be equipped with pneumatically lifted horizontal roller sets and vertical roller pins. The modular table design allows future length adjustments by replacing a few structural frame elements. Table rotation is possible from 0° to 81°, and can be unlocked up to 91° for production lines. We also offer dedicated transport trolleys for the ER-01H tables, enabling the transport of finished prefabricated elements from the table.

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 hp 200 mm cutting height 1 hydraulic feed brake Tilts to the left up to 60°, to the right up to 30°, can be tilted from the front using a hand crank When tilted at 45°, the cutting height is 140 mm Swivels to the left up to 60°, to the right up to 45° Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the outfeed roller conveyor with scale and stop guide on the left - 6000 mm Length of the infeed roller conveyor 2000 mm, mounting side on the right Machine is fully mobile, overall length 9000 mm Njdpfx Aob Dkyvolfjlf Can be tilted from the front with a hand crank; the machine is also available with a 215 mm or 240 mm cutting height and other options.

Condition: new, Year of construction: 2026, functionality: fully functional, 11 kW = 15 hp Cutting height 200 mm Saw blade diameter 550 mm with scoring blades Njdpfx Aljcyd Ncjfjlf Cutting width to parallel fence 1500 mm Sliding table length 3200 mm Sliding table mounted on hardened steel rollers (similar to Altendorf) The large fence on the sliding table can be swivelled 45° to the left and right; Electric height adjustment Electric tilt adjustment up to 45° Digital display for the tilt angle Machine weight 1250 kg