Shredder

ZENO ZTLL 420x750

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Iaslhccev Npf Aoqmot Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2007, No. 04468 Single-shaft shredder ZENO ZTLL 800 x 1000 Used, year of construction 2007 3200 operating hours Iaelhev Rpvwoccqmet This chipper is used for shredding wood, paper, plastic, residual waste, etc. Inlet cross-section 800 x 1000 mm Hole diameter in screen 25 mm Rotor diameter 300 mm Number of knives 20 Drive motor 15 kW Soft start control CE-compliant Transport dimensions 1500 x 960 x 1500 mm LWH Weight approx. 1700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, Functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Ielsu Thabjhccqmoat Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2000, 75kW Islhccjhwd Huoqmoat incl. trough chain conveyor ZENO TKF 600x7600 (2007) and magnetic drum ZENO ZMT 500x620 (2007)

Condition: ready for operation (used), Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available. Iaolhcstph Htjcqmet

Condition: used, Year of construction: 1993, Feed opening: 800 x 1,000 mm Hopper capacity: 0.8 m³ Throughput capacity: 2.5 - 4 rm/h depending on material and screen Rotor diameter: 300 mm Rotor length: 800 mm Ijljqmmldohccqmeat Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 250mm Air speed: 28 m/sec Motor power: 15kW Operating hours: 4165

Condition: used, Inlet cross section: 5,000 x 3,500 mm Drive: 2 x 110 kW Iajlhsbq Stweccqmet Hydraulic power unit slider: 22 kW rotor flight circle: 635 mm Rotor design: 244 pcs. inserts on tool holders Screen design: solid screen basket, reinforced with ribs, hydraulically swivelling away hopper volume: approx. 40 m³ machine weight: approx. 55 t

Condition: ready for operation (used), Year of construction: 2010, Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available. Iajlhccqotpp Hpemot

Condition: good (used), Intake opening: 1.000 x 1.200 mm Motor power: 37 kW Islhsbyiq Ijccqmoat Rotor flight circle: 450 mm Rotor speed: approx. 86 rpm Cutting system: 51 cutting inserts Screen: quick-change-device, Ø 80mm Machine weight: approx. 3.500 kg

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Iaelhccocb Dtteqmjt Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Ijlsbq Stqjhccqmsat Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Iaslhccqscbnigjmet Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Machine number: A 21

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 90 k W Rotor flight circle: Ø 600 mm Rotor speed: approx. 75 rpm Cutting system: 42 cutting inserts 60x60x30 mm on toolholders Iaslhcjcbnu Rocqmjt Screen: with quick-change-device Counter knife: with cutting gap adjustment Gearbox: with torque monitoring Product discharge with swivel-mounted conveyor TKF 400x5000 Machine weight: approx. 13.400 kg Machine number: A 2

Condition: used, Intake opening: 800 x 1000 mm Isljcayzqohccqmeat Motor power: 18,5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Cutting system: cutting inserts Screen: reinforced with ribs Connecting piece: sideway Machine weight: approx. 1.950 kg Machine number: A 33

Condition: used, machine/vehicle number: 12428, Rotor width: 1800 mm 1 row of stator blades Ielhccqokyy U Rjmjat Inlet: approx. 1800 x 1900 mm Drive: 90 kW

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, For sale is a complete chipping system with a drum screen, built in 2005, including a metal detector and conveyor. Iaslswkr D Njhccqmjt The system has always been well maintained and cared for – our sawmill is known for this! All conveyors located outside the building were derusted and repainted by a company in 2019. Furthermore, the following wear parts were replaced: Screen (50x50 perforation) behind rotor 2024 Lower feed rollers 2019 Gear motor for feed rollers 2019 Gear motor for elevator conveyor approx. 2018 Drum screen rollers were replaced as needed Elevator roller chain 2010 Rotor main bearing 2021 All intermediate plates (wear parts) in the 90-degree bends were welded in 2023 Zeno drum chipper TYPE 800/820 E 250/350, built in 2005 Feed 350x800mm Rotor diameter 800mm Drive 75kW (original) converted to 90kW (2018) 5 frequency-controlled feed rollers, 3 (bottom) were replaced in 2019 Metal detector Mesutronic device type Metron 05 MN 5.0 D 850/500 Drum screening machine, diameter 1600 mm, total length 9000 mm, with 4 screening fractions, 11 kW frequency-controlled drive Chain conveyor 1000 mm wide, 17700 mm long, 11 kW drive, vertical with 2x 90-degree bends Chain conveyor 1000 mm wide, 31500 mm long, 7.5 kW drive Chain conveyor/distribution conveyor 800 mm wide, 10100 mm long, of which 4500 mm is open at the bottom, 5.5 kW drive Vibrating trough 800 ZVR, 800 mm wide, 12640 mm long, 5.5 kW drive Spare parts available if required: Feed gear motor, top and bottom Feed rollers, top (2 pieces) Sprocket Including shaft for vertical conveyor (vertical conveyor) Gear motors for vertical conveyor and cross conveyor to the silo Chopping knife, counter knife, counter knife holder, 10 m roller chain including carrier THE SYSTEM WILL BE IN OPERATION UNTIL AUGUST 2025

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg ADVANTAGES Iaslhccqsrm Nibomot – German production – unpainted – very good condition – used chipper Original photos Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Net price: 8450 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal infeed max. feed width 300 mm max. feed height 85 mm Motor 30 kw Iolhccqsu Ezp Aomjat

Condition: used, power: 110 kW (149.56 HP), Material feed is vertical or with a wheel loader via a feed hopper with 6 horizontal augers. Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 1000 mm Stator blades: 2 Rotor blades: 10 Iaslhccowbuc Neqmot Drive: 110 kW

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm Ijlhccqoqy Ek Homeat - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: like new (used), Functionality: fully functional, Year of construction: 1997, For sale is a 30 KW wood chipper, in like new condition. For more information, please call. Islhcov D Irdscqmsat

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder Ijlhcevw Ry Djcqmsat - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: repair required (used), Year of construction: 2018, operating hours: 400 h, Functionality: limited functionality, overall weight: 12,000 kg, rotor diameter: 600 mm, rotor width: 1,600 mm, cutting force: 3 t, rotational speed (min.): 120 rpm, power: 2 kW (2.72 HP), Drive power: 2 x 55 kW Iaslhovb Hppoccqmet Sieve: 35 mm hexagonal Sieve design: solid sieve basket, reinforced with ribs, including quick-change sieve device Counter blade: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and fill level sensor (Sonar Bero) Gearbox: compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor flight pitch: 600 mm Rotor design: 4 rows (76 pieces) of positive cutting inserts 60 x 60 mm on tool holders Rotor bearing: pedestal bearing Machine base and slider base: grooved Weight: approx. 13,400 kg

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw Islou Rl Ruohccqmsat with frequency converter for variable speed no vibrating chute included

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed Ielsu Rl Sfohccqmsat max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw frequency-controlled for variable speed without vibrating chute