English
German (Germany) English (United States) French (France) Dutch (Belgium) Italian (Italy) Dutch (Netherlands) Polish (Poland) Turkish (Turkey) Czech (Czech Republic) Swedish (Sweden) Greek (Greece) Hungarian (Hungary)

Shredder
ZENO ZTLL 1000x1200

Condition
Used

MACHINE DATA

Machine type:
Shredder
Manufacturer:
ZENO
Model:
ZTLL 1000x1200
Condition:
good (used)

PRICE & LOCATION

LISTING DETAILS

Listing ID:
A171-1546
Reference number:
A 15
Update:
10.10.2022

DESCRIPTION

Intake opening: 1.000 x 1.200 mm
Motor power: 37 kW
Rotor flight circle: 450 mm
Rotor speed: approx. 86 rpm
Cutting system: 51 cutting inserts
Screen: quick-change-device, Ø 80mm
Gpczjcvv0
Machine weight: approx. 3.500 kg

SELLER

ZENO GmbH

Contact person: Frau Nadine Krüger

ZENO-Platz 1

57629 Norken, Germany

Registered since: 2012

23 listings online

Das in Norken 1978 gegründete Unternehmen ist Hersteller und Entwickler von Förder-, Sortier-, Sieb- und Recyclinganlagen zur Rest-, Haus- und Sperrmüllverwertung, Kunststoffaufbereitung und Restholzverarbeitung.
ZENO - Zerkleinerungsmaschinenbau Norken GmbH
ZENO-Platz 1
57629 Norken

Telefon: 02661 / 9596-0
Geschäftsführerinnen: Richarda Krüger, Nadine Krüger

Send inquiry

us 
Germany
Austria
Switzerland
United States
United Kingdom
France
Belgium
Spain
Mexico
Italy
Netherlands
Poland
Russian Federation
Belarus
Ukraine
Estland (Reval)
Turkey
New Zealand
Ireland
Czech Republic
Denmark
Finland
Sweden
Norway
Malta
Luxembourg
Greece
Lithuania
Latvia
Iceland
Portugal
Brazil
Venezuela
Argentina
Hungary
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Macedonia
Bosnia and Herzegovina
Israel
Egypt
India
Indonesia
South Korea
Japan
Thailand
Malaysia
Vietnam
China
Taiwan
Iran
Bangladesh
Afghanistan
Attention: Your request will be forwarded to all dealers in this category. This will allow you to receive many offers!
The inquiry could not be sent. Please try again later.
These listings may also fit your interest.
ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600 ZENO ZTLL 1800x1600
more images
13
Call
Bad Tennstedt Germany
2000
used
75kW incl. trough chain conveyor ZENO TKF 600x7600 (2007) and magnetic drum ZENO ZMT 500x620 (2007) B8t2efnrzq
ZENO ZTLL 5000x3500
more images
1
Call
Rheinland-Pfalz, Deutschland Germany
used
Inlet cross section: 5,000 x 3,500 mm Bmi2dsxs Drive: 2 x 110 kW Hydraulic power unit slider: 22 kW rotor flight circle: 635 mm Rotor design: 244 pcs. inserts on tool holders Screen design: solid screen basket, reinforced with ribs, hydraulically swivelling away hopper volume: approx. 40 m³ machine weight: approx. 55 t
more images
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 800 x 1000 mm Motor power: 15 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Cutting system: new rotor with cutting inserts Es9rofn Screen: reinforced with ribs Hopper: with lid Machine weight: approx. 1.950 kg Machine number: G-1-78
more images
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 600 x 1000 mm Motor power: 15 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 rpm Cutting system: 18 cutting teeth Screen: reinforced with ribs Cnn0qc7k Hopper: Height 1.050 mm, with lid Machine weight: approx. 1600 kg
more images
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 1.400 x 2.300 mm Motor power: 45 kW Rotor flight circle: 450 mm Rotor speed: approx. 120-140 rpm Cutting system: 24 tool holder with cutting blades Screen: reinforced with ribs, swivel-mounted, locked mechanically Screen perforation: Ø 80 mm Counter knife: with cutting gap adjustment device, tiltable Hopper: Height 1.300 mm Bn8zinbh Machine weight: approx. 7.500 kg
more images
Call
Norken, Germany Germany
(dealership location)
as good as new (ex-display)
Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Ts3midx2p Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32
ZENO ZTLL 1200x1600 ZENO ZTLL 1200x1600 ZENO ZTLL 1200x1600
more images
3
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Nv8cgfstn Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg
ZENO ZTLL 420x750
more images
1
Call
Norken, Germany Germany
(dealership location)
used
Inlet cross section: 420 x 750 mm drive: 11 kW rotor flight circle: 250 mm rotor speed: approx. 140 rpm Rotor design: 10 single teeth Screen design: solid screen basket, reinforced with ribs hopper: 1.050 mm high, without lid Suction nozzle: 200 mm diameter, at the front Nfinoxsez machine weight: approx. 900 kg
ZENO GmbH ZTLL 1200x1600 ZENO GmbH ZTLL 1200x1600
more images
2
Call
Norken, Germany Germany
(dealership location)
as good as new (ex-display)
Intake opening: 1200 x 1600 mm Motor power: 55 kW D2ew8lf Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Machine number: A 21
more images
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 1.200 x 2.300 mm Motor power: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 rpm Cutting system: 24 single teeth Iwdg7zf Screen: reinforced with ribs Hopper: Height 1.000 mm, without lid Machine weight: approx. 6.000 kg
ZENO GmbH ZTLL 1200x1600, semimobil
more images
1
Call
Norken, Germany Germany
(dealership location)
as good as new (ex-display)
Intake opening: 1200 x 1600 mm Motor power: 90 k W Rotor flight circle: Ø 600 mm Qb2mna3 Rotor speed: approx. 75 rpm Cutting system: 42 cutting inserts 60x60x30 mm on toolholders Screen: with quick-change-device Counter knife: with cutting gap adjustment Gearbox: with torque monitoring Product discharge with swivel-mounted conveyor TKF 400x5000 Machine weight: approx. 13.400 kg Machine number: A 2
ZENO ZTLL 800x1000 ZENO ZTLL 800x1000
more images
2
Call
Norken, Germany Germany
(dealership location)
used
Intake opening: 800 x 1000 mm Motor power: 18,5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Cutting system: cutting inserts Screen: reinforced with ribs Connecting piece: sideway Machine weight: approx. 1.950 kg Machine number: A 33 Tiqlxgbzn
ZENO Einwellen-shredder Zeno Typ ZTTL 1800/1900
more images
1
Call
Zuzenhausen, Germany Germany
(dealership location)
used
Rotor width: 1800 mm Cfickxhp7a 1 row of stator knives inlet: approx. 1800 x 1900 mm Drive: 90 kW
ZENO ZNZGV 1000
more images
1
Call
Meckesheim Germany
used
Feed opening: approx. 1000 x 1700 mm Cdxfn3d2cc Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor knives: 10 Drive: 110 kW
ZENO 350/ 420 E100 ZENO 350/ 420 E100
more images
2
Call
Berlin, Germany Germany
(dealership location)
1980
ready for operation (used)
Technical details on demand. B9clkh0lxc
more images
Call
Norken Germany
refurbished (used)
Infeed width: 520 mm Infeed height: 3160 mm Rotor diameter: 600 mm Rotor knives: 4 times usable knives Stator knife: 1 pc, externally adjustable Infeed unit: 2 rollers Motor: 37 kW S70dq9 Rpm: approx. 160 rpm Machine weight: approx. 3,800 kg
ZENO ZTS 2500 ZENO ZTS 2500
more images
2
Call
Praha 5 Czech Republic
new
- suitable for size separation of municipal waste, plastics, paper, wood waste, .....in the amount of about 100-150 m3 / hour - separation sections for materials up to 80 mm , 80-320 mm , over 320 mm - separation section for fractions 0 - 80 mm, length 6.250 mm - separation section for fractions 80 - 320 mm, length 3.750 mm - fraction above 320 mm falls out at the end of the screen for further loading - diameter of the sieve working cylinder 2.500 mm - length of screen roller 10,000 mm N30kz - t...
ZENO ZNZGV 1000
more images
1
Call
Meckesheim Germany
used
Feed opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor knives: 10 Jyi2z3 Drive: 110 kW
more images
Call
Norken Germany
refurbished (used)
Infeed width: 620 mm Infeed height: 180 mm Rotor diameter: 610 mm Rotor knives: 2 pcs Orgyt Stator knife: 1 pc Infeed unit: 2 rollers Motor: 55 kW
ZENO ZNZGV 1000
more images
1
Call
Meckesheim Germany
used
Feed opening: approx. 500 x 700 mm Cdtrynyin8 Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor knives: 10 Drive: 110 kW
ZENO ZTH 1000 / 720 E 330 ZENO ZTH 1000 / 720 E 330
more images
2
Call
Norken Germany
as good as new (ex-display)
Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers M0gs2kin Motor: 110 kW Machine weight: approx. 8,000 kg
ZENO ZTH 1600 / 1400 E 550 ZENO ZTH 1600 / 1400 E 550
more images
2
Call
Norken Germany
new
Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm J9w0yb Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg
ZENO GmbH
more images
1
Call
Norken Germany
excellent (used)
Complete shredding and screening plant for the production of refuse derived fuels. Consisting of: Mriouayn Pre-shredder ZVZ 3000 Overband magnetic separator Disc separator ZENO ZSS Shredder ZTLL 2500x1900 Conveyor system
ZENO ZDV 2500x2000 ZENO ZDV 2500x2000
more images
2
Call
Norken, Germany Germany
(dealership location)
new
ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Lidwyzqpf
ZENO ZRS 1600x1200
more images
1
Call
Norken, Germany Germany
(dealership location)
used
Inlet cross section: 1,600 x 1,200 mm Hgnkzuf drive power: 2 x 45 kW knife width: 55 mm number of knives: 56 pieces, screwed together rotor flight circle: 655 mm Planetary gear
ZENO ZEZ 2500x1700 ZENO ZEZ 2500x1700
more images
2
Call
Norken, Germany Germany
(dealership location)
used
inlet cross section: 2500 x 1700 mm Bmvcdzm2 Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg
ZENO ZDV 3000x2000 ZENO ZDV 3000x2000
more images
2
Call
Norken, Germany Germany
(dealership location)
used
Stationary double roll primary crusher Drive line 4 x 45 kW 2q3scy2z Compact gearbox Hydraulic screen flaps Rotor with bolted cutting plates on tool holders
ZENO ZDV 2500x2000
more images
1
Call
Norken, Germany Germany
(dealership location)
used
Hopper opening 2.500 x 2.000 mm Rotors: 2 pcs. Rotor flight circle: 470 mm Rotor design: 2 x 22 single teeth Nv8tpjy7h Engine: Mercedes Benz 6 cylinder, 260 kW/2300 rpm Hopper end: with reinforced Pipe-Line frame discharge conveyor: hydraulically foldable length: approx. 8.000 mm Width: 1.400 mm 1 permanent magnet - tape roll for belt width 1.400 mm The machine is mounted on a container base frame. machine weight: approx. 21.000 kg
ZENO ZDV 2500x2000 ZENO ZDV 2500x2000
more images
2
Call
Norken, Germany Germany
(dealership location)
new
Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. K9ddz Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg
AUFSPANNWINKEL 1000x1200 AUFSPANNWINKEL 1000x1200 AUFSPANNWINKEL 1000x1200
more images
3
Call
Tönisvorst Germany
used
length 1000 mm width 570 mm height 1200 mm Blqpoqjom weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m used angle plate in good condition with several bores for clamping.
Heidelberg Farbwalzen OHZ-S Heidelberg Farbwalzen OHZ-S Heidelberg Farbwalzen OHZ-S Heidelberg Farbwalzen OHZ-S
more images
4
Call
Neuhausen Germany
used
Spindle length 830 mm length rubber cover 720 mm Vr9jbaaf Diameter rubber cover - mm 20 ink rollers for a Heidelberg cylinder OHZ model S some unused, some in good condition and some in worse condition. - Spindle length approx. 830 mm - Cover length approx. 720 mm
Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm Scherenhubtisch  1000x1200mm
more images
7
Platform: 1000x1200mm Load capacity: 250 kg Buoh2vsmii Znsajjq2 Height: from 500 to 900 mm
die magnetprofis GmbH & Co. KG Model 1000 x 1200mm die magnetprofis GmbH & Co. KG Model 1000 x 1200mm
more images
2
With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1064mm x 867mm Internal dimensions: 974mm x 775mm Mj7azhrx
SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451 SIAT  XL 451
more images
9
Call
Juszczyn Poland
2010
as good as new (ex-display)
Box sealer SIAT XL 451 M8r30t double-sided automatic, throughfeed sealer pneumatic pressure production year 2010 CE marking maximum box size 500×500 mm machine dimensions 1000x1200x1900 mm
 Gitterroste verzinkt  Gitterroste verzinkt
more images
2
Call
Goldenstedt Germany
used
dimensions 900x 1200 mm Cfpmaxg87e Ideal as a floor for heavy duty shelving div. sizes available - 900x 1200mm - 1000x1100 mm - 1000x1200 mm
AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E AXA VHC 50-6000-M/2E
more images
13
Call
Beringen / Schaffhausen, Switzerland Switzerland
(dealership location)
2003
excellent (used)
Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Coolant through spindle Y8sd8btr Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH
DAN Pallettierer DAN Pallettierer DAN Pallettierer
more images
3
Call
Helmstedt Germany
good (used)
Rebuild: 2018 Size max: 370x290x230 mm Size 284x230 mm Pallet size: 1000x1200 mm Clqx0k7 Equipment turning device in the infeed slip sheet feeder pallet dispenser PT
Call
Torbole Casaglia Italy
good condition (used)
MILLING FPT MOD. STINGER WITH FIXED PORTAL CNC Heidenhain 530i CHARACTERISTICS OF WORKING AXES: Longitudinal travel 1750 mm Cross travel Y mm 1400 Vertical travel Z mm 600 Axis feedrate mm/min 35.000 Max acceleration m / sec2 6 WORKING AREA: Max horizontal passage 1200 mm OVERALL DIMENSIONS: Max height 3750 mm Base dimensions 5650x3350 mm Occupied area m2 22 ELECTRIC SPINDLE: Power kw 18 Torque Nm 80 Max speed rotation 18000 rpm Tool taper HSK-A63 MAX POWER INSTALLED: kW 55 TOTAL WEIGHT (APPROX....
Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE Manex DNL-C-SE
more images
13
Call
Slowakei Slovakia
excellent (used)
Depal (compact) - Glass depalletiser Manex - excellent condition Year of construction: 1997 / 2010 - general overhaul,conversion to Siemens S7 Manufacturer: Manex Slovakia Machine type: DNL-C-SE Operating hour: 24.035 - standing on 6.05.2022 Last service: Sept 2021 Output: up to 140 layers / hour Pallet size: Euro pallet 1.200 x 800 mm Bottles: 0,375 / 0,5 / 0,75 / 1,5 L Layers per pallet: 6 layers for 0.75 L bottle Maximum pallet height: 2300 mm from the floor Control: PLC Siemens S7 300 (fro...
Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet Cefla Smartparquet
more images
8
Call
Hajnówka Poland
2010
good condition (used)
I will sell a complete line for oiling CEFLA SORBINI SMARTPARQUET floors and a drying tunnel UV Aerotherm . The Sorbini line consists of a roller coater, a grinding system with two pads and two brushes. The speed of rotation of each unit and the feed are regulated by means of inverters. The line is completely renovated and in continuous use. Dimensions of the CEFLA SMARTPARQUET dimensions: 4200x1000x1600 mm Zbfu9y7j Dimensions of the AEROTHERM UV: 3000x1000x1200 mm At any time, I invite you to w...
Call
Warszawa Poland
2022
new
Professional automatic wrapper for euro size or industrial* pallets - Wrapper VO Icpkmedn8 Capacity of 15-25 pallets per hour. The machine can be integrated with pallet transporters, elevator and other additional accessories. Standard pallet weight up to 600kg (1200kg option). Standard pallet height up to 2500mm (option 3500mm). Wrapping of pallets 800x1200mm, in option 1000x1200 and 1200x1200mm Polpack is a pallet wrapping machine manufacturer with 30 years of experience. Each project is priced...
WOODLAND MACHINERY MJ6116TD(400) WOODLAND MACHINERY MJ6116TD(400) WOODLAND MACHINERY MJ6116TD(400) WOODLAND MACHINERY MJ6116TD(400) WOODLAND MACHINERY MJ6116TD(400)
more images
5
Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - ...
Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020
more images
14
Call
Helmstedt Germany
2000
good (used)
Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Build in 2000 (XZE-M) 2000 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VAC, 3Ph/N/...
Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020 Cyklop XZE-311-22 und Cyklop GL 1020
more images
11
Call
Helmstedt Germany
2010
good (used)
Cyklop Pallet strapping & film wrapping line: Cyklop XZE-311-22 pallet strapping Cyklop GL 1020M - pallet film wrapping Bjsr8usq Build in 2010 (XZE-M) 2006 (GL 1020M) Pallet strapper Cyklop XZE-311-22: Speed: up to 100 Palles/h Pallet sizes: 800x1200 mm, 1000x1200, 1200x1200 mm Passage height: max 2700 mm (from floor) min height pallet conveyors: 300 mm max palletizing height: ~2500 mm - height conveyors (incl. pallet) max weight pallet: 1.500 kg Height over all: ~4200 mm Elektrical: 400 VA...
FEEDBACK
Successful: Task carried out
Error: Task could not be carried out