Used Weiss Heating for sale (126)

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Cpedpfx Afoxbgfmo Dsu

Condition: good (used), Year of construction: 2012, Motor: 1.1 kW For technical data, see illustration. Codpfx Ajxbgfgsf Dopu

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system Cpodsph U Ayspfx Af Dsu SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Cedpoxbgrgjfx Af Djpu Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), operating hours: 21,793 h, Weiss Ultra 60 VU Air conditioner Manufacturer: Weiss Type: Ultra 60 VU Date of manufacture: 1999 Description of air conditioner Cpjdpfx Aju Hybgof Dou Serial number. 394/54166 Air flow rate 4000 m³ / h External compression system: 600 Pa Motor power 5.4 kW Filter quality F7 Cooler 7.3 kW Coolant R407C Electric heating system 10.0 kW Humidification max. 7.5 kg / h Compressor output 4.01 kW max. operating pressure 25 bar Maintenance 01/2019 Leak test: 01/2019 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Cpsdpsph U Dhofx Af Dsu Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2007, condition: good (used), White Air conditioning Ultraclean ULTRA 55.2 Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10,5 kW Cooler: 12,7 kW Humidifier: 3 kg/h Filter class: F7 Supply air volume 2500 m{h Codpfx Aofyk Dqjf Djpu ext. ext. compression 200

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Cedpoh Izh Iofx Af Depu Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Cpjdpfsv Edd Sjx Af Deu 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CR416871, overall weight: 661 kg, CR0700K Heavy-duty table Total transmission ratio: 260 Table drive speed [1/min]: 11.5 Table output torque [Nm]: 8000 MTM [kgm2]: 3,500 Turning time: in sec: 3.3 Shift angle in°: 180 Pause time (s): 4 Installation position: normal (MP1) Drive position: DP1 (laterally inside) Disc bearing: Standard Rotary encoder: without Motor: Fanuc Special clamping disk CR: Standard Partial accuracy: +/-15" Repeat accuracy: +/- 10" Axial and radial run-out accuracy: 0.02mm Cpjdpfx Ajtp T Smef Dsu Painted in RAL: 7035 Assembly instructions

Year of construction: 2024, condition: new, functionality: fully functional, maximum load weight: 1,200 kg, faceplate diameter: 650 mm, height adjustment type: hydraulic, welding current at 100% duty cycle: 300 A, The positioner can also be hired (also as a trial hire) Cedpfjrkmngsx Af Depu Maximum load: 1.2 tonnes Rotation speed: infinitely variable approx. 0.07 - 1.6 rpm Face plate size: 650 mm diameter with T-slots Faceplate height (horizontal): 711-1,060 mm Hydraulically height-adjustable for more ergonomic working Control: wired manual control bulb and foot switch Subject to prior sale and hire

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, welding rotator for max. load 1t polyurethane wheels 50,0 mm x 200mmØ Cedpfxewuzc As Af Dopu workpiece diameter 20 - 800 mm speed-range 80 - 1.600 mm/min foot-pedal availible also for renting

Condition: ready for operation (used), Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Codpfxow Havfe Af Dopu Type: TC 700 T Overall dimensions: Width: 870 mm Depth: 900 mm Height: 820 mm Weight: 871 kg Electrical specifications: 400V; 6.8A; 3.4 kW Table diameter: 700 mm

Condition: ready for operation (used), Year of construction: 1988, A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible. Cpodju Afzwepfx Af Dou

Condition: used, Remote controlled tensioning wagon fully hydraulic. Track gauge 900 mm. Carriage height 400 mm. Cpjdpfxemhgc As Af Dou With auxiliary trolley. Cabin. Electric control cabinet. Model / Prism Chains driven. 4 years before decommissioning many new parts installed. Hydraulics, feed, collet etc.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG Weiss W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. Cjdpfxotmrlhj Af Djpu The basis of the EMAG Weiss W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a CNC controled universal cylindrical grinding machine EMAG Weiss W 11 CNC. The machine is suitable for external-interna- face and cylindrical grinding. The W 11 CNC cylindrical grinding machine is perfect for one-offs- / prototype- and serial production. This cylindrical grinding machine is also used for sample production in the field of training and maintenance. CONTROL Eckelmann TECHNICAL DATA Workpiece length: max. 1.500 mm Center height: 200 mm | Option 320 mm Workpiece weight: 250 kg Csdpfxor Ey Huo Af Djpu Workhead: MK 4 | Option MK5 / MK6 Tailstock: MK 4 TOOL CARRIER Single wheel straight / incliend, but also possible 2 wheels on B-axis combined with internal grinding spindle. Price, delivery time and equipment of the machine according to agreement.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Cpsdpotmqcwjfx Af Dju Price, delivery time and equipment of the machine according to agreement.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a External cylindrical grinding machine EMAG Weiss WPG 7 - external cylindrical grinding at the highest level and on the smallest footprint. Footprint of the WPG 7 is only 1,800 x 2,400 mm. The machine is perfect for machining small shafts or pinions. The WPG 7 can be loaded manually as well as by automated solutions (such as chain conveyors and linear gantry). Cedstlrkbjpfx Af Dopu CONTROL Fanuc 0i TECHNICAL DATA Workpiece length: max. 250 mm grinding Ø: max. 80 mm Center height: 100 mm Center length: 380 mm Workpiece weight: max. 30kg Grinding wheel Ø: max. 500x 80 mm Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm Csdowbvgvjpfx Af Djpu z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device

Condition: ready for operation (used), Year of construction: 2017, operating hours: 20,995 h, functionality: fully functional, machine/vehicle number: W11106617/144, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 390 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding diameter: 0–390 mm Internal and external grinding: up to 1 m Max. workpiece weight, unsupported (MK 4): 100 Nm Max. workpiece weight between centers: 250 kg Cjdpfx Afow Nwxus Djpu X-axis Feed Rapid traverse: 350 mm Rapid feed rate: 12 m/min Fine feed increment: 0.0001 mm Z-axis Feed Max. travel: 1,150 mm Travel speed: 12 m/min Linear scale resolution: 0.0001 mm Spindle Data Internal grinding spindles: 80 x 350 mm Grinding Wheel Spindle Head Grinding wheel diameter: 400 mm Drive power: 5.5 – 7.5 kW Peripheral speed: 25 – 50 m/s Workpiece Spindle Head Speed range: 1 – 1,000 rpm Internal taper: MK4 Centering diameter: 63 / 80 mm Tailstock Quill taper: MK4 Quill stroke: 45 mm Filtration and Extraction Paper band filter system: 350 l tank Mechanical mist extraction: 600 m³/h MACHINE DETAILS Operating hours: 20,995 h EQUIPMENT Full enclosure Manual balancing system Touch-trigger longitudinal position indicator Leveling shoes for alignment Grinding centers MK 4 solid and half center (carbide-tipped) Dressing tool 0.5 carat diamond

Condition: used, Weiss clamping carriage fully hydraulic with auxiliary trolley Track width: 90 cm Csdjq U N A Sepfx Af Djpu Has already been dismantled and is ready for loading at any time. Location: Austria, near Kufstein

Condition: new, Year of construction: 2013, machine/vehicle number: TC359308, overall weight: 112 kg, Weiss TC320T indexing table complete with TS004E control board - NEW IN PACKAGING Cpedpfx Afsv Rm S No Dsu Number of stations 08; Speed ​​level F; Mounting position - horizontal; Gear position - underneath; Motor position - inside. Power supply voltage 400/480V AC/three-phase User manual in English EC declaration of conformity The set also includes a new electronic TS004E control board. User manual in English

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: SB11/300/40, For sale is a Weiss climate test chamber. Designation: SB11/300/40 Cooling-heating operation: -40...+180 °C Climate operation: +10...+95 °C Humidity range: 10...98 % RH Temperature stability The temporal temperature stability in climate mode is ±0.1...±0.5 K The temporal temperature stability in cooling-heating mode (without climate) is ±0.2...±0.5 K Humidity stability The temporal humidity stability across the entire operating range is ±2...±3 %RH Condenser: air-cooled Rate of temperature change: Cpsdpfow Dygfsx Af Dju Cooling: approx. 3.1 K/min Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg / Power supply: 4.8 kVA Electrical connection: CEE plug 16 A Connection voltage: 400V/3Ph+N+PE/50 Hz (+6%/-10%) Refrigerant: R404A! Version: mobile Type: SB11/300/40

Condition: used, Clamping Trolley White with auxiliary wagon with tracks fully hydraulic track width: 90cm immediately available Location: Austria, near St. Pölten Cpedpehwzrkefx Af Deu