Used Mazak Laser Cutting Machine for sale (297)

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Specification | Value ---|--- X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Bwsdpfx Anjvurd Ejqow Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Machine weight | 7,215 kg Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Bodpfx Ajz Ar R Dsnqjww Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, controller manufacturer: Mazatrol SMOOTHEZ, workpiece weight (max.): 1,200 kg, total height: 2,938 mm, total length: 3,816 mm, total width: 2,902 mm, table width: 600 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,000 kg, operating hours of spindle: 250 h, spindle motor power: 18,500 W, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9803 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours  ATC 48 Position Optional Lehmann EA-520 R-Mi4 4e axis integrated Optional Lehman Tailstock  Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe  Optional tooling package ca 30 units Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 X - Travel: 1050mm Y - Travel: 600mm Z - Travel: 600mm Table Length: 1300mm Table Width: 600mm Bwjdpozx Sprjfx Anqow Table load: 1200 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 48 Coolant through spindle / Bar:20 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 3816mm Width: 2902mm Height: 2938mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2018, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 2, This Mazak Optiplex Nexus 3015 4,0kW Fiber + Fasani CSS3015 was manufactured in 2018. A fiber laser cutting machine featuring a 3000x1500mm max. sheet size, 4.0kW IPG fiber resonator, intelligent nozzle changer, and Donaldson DFPRO4 extraction. Includes Fasani CSS 1530 automation and a pallet changer. A great opportunity to buy this Mazak Optiplex Nexus 3015 fiber laser cutting machine. Contact us for more information. Additional equipment • Intelligent nozzle changer • Intelligent monitoring and focus detection • Smart software • Donaldson DFPRO4 extraction • Pallet changer • Open robot interface • Fasani CSS 1530 automation Extra Information Bjdpfx Aezdd Rmsnqjww Machine still under power

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, For sale: Mazak EMC 3015 automatic sheet metal loading and unloading system, Extensible Manufacturing Cell. A new one costs approximately €130,000. The system is practically new. Used with a machine with 2,000 hours of operation, and only occasionally. Manufactured in 2016. High Column model, compatible with the following Mazak machines: Bwodpfx Asyh N Rdonqsw Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO Maximum sheet dimensions: 3000x1500mm Maximum sheet weight: 900kg. Unloading station: max. 2000kg. Sheet metal loading queue management system.

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, • Automatic opening/closing of the operator door (1000U) • Provision for fume extraction • Robot interface (Advance/Profibus) • 8" self-centering chuck with BB-08 through-hole (1st spindle) • Provision for Mazak Monitoring System-B RMP60 • Mazak API • Smooth synchronized tapping • On-machine writing function • Maximum program memory: 8 MB • 36-tool tool magazine - Main spindle motor: AC 15 kW (20 HP) - B-axis indexing: 1st (locking via joint) - Capto tooling - High-pressure coolant: 15 bar + simultaneous continuous flow coolant: 5 bar - Lateral chip conveyor • Counter-spindle with C-axis, including C1+C2 synchronization • Provision for Multi & Flash Tool system Bwjdjzz Rt Ujpfx Anqsw • Tailstock function for the counter-spindle

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Fusion 640M, table load: 500 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 2,000 mm, number of axes: 3, This 3-axis Mazak VCN-410A was manufactured in 2003. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-410A vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 410 mm • Tooling: • Tool changer: automatic, arm type • Max tool length: approx. 350 mm • Feeds: • Rapid traverse X/Y/Z: up to 36 m/min Bjdpozxfcfsfx Anqsww • Dimensions and weight: • Machine dimensions: approx. 2000 x 2600 x 2800 mm • Machine features/options: • Rigid tapping • EIA/ISO programming • Helical cutting • 3D compensation • Coolant system • Automatic lubrication Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details. • Outer length: 500 mm • Outer width: 400 mm • Table load: 300 kg • Max distance between vertical spindle and table: 140 - 600 mm • Number of tool slots: 60 positions • Chip conveyor: Belt type (with chip pan preparation) • Cooling pressure: 15 kg • Controlled Axes: 5 continuous • Table Dimensions: 500 x 400 mm (x 2 pallets) • Distance Spindle Nose to Horizontal Table: 190 - 650 mm • Spindle Torque: 252 Nm (186 ) • Operating Hours (Power On): 57,979 hrs 58 min 25 sec Bwjdszzwnfopfx Anqew • Operating Hours (Auto Cut): 31,273 hrs 09 min 14 sec • Operating Hours (Cutting Time): 27,810 hrs 53 min 42 sec • Total Time: 57,979 hrs 58 min 24 sec • Installed Software Options: Auto Pecking Cycle with Load Detection, Synchronized Tapping, EIA Dynamic Compensation 2, Additional M-Code Function (2 M-Codes), G00 Slope Constant, Mazacc-3D High-Speed Software Package, Shape Compensation for Rotary Axes, Tilted Working Plane, Simultaneous 5 Axis Control • Visual Observations: Internal chamber shows normal surface wear and minor coolant staining on enclosure walls, no visible major mechanical damage

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) Bedpszz Afijfx Anqoww - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system Bodpfx Asz Ipzuonqeww • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Machine type: CNC Turning/Milling Center / Multitasking Bwjdeyuucnjpfx Anqew Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Year of manufacture: 1999

Condition: ready for operation (used), For sale: 4 Mazak machines – 1 milling machine and 3 lathes, all in working condition. Must be sold due to lack of space. Bedpfe Agpy Hjx Anqoww 1 FJV 25 2 Qturn 8 1 Qturn 6 with robot Total price: €14,000.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,917 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2017. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust worktable size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. • Operating counter (cutting only): 11,917 h • Axis travels (standard VCN 530C): • Distance table surface to spindle nose: 150–660 mm • Distance column to spindle centre: 586 mm • Work envelope / capacities: • Max workpiece length: 1,300 mm • Max workpiece width: 550 mm • Max workpiece height: 570 mm • Max workpiece weight: 1,200 kg • Worktable: • Table size: 1,300 × 550 mm • T-slots: 5; width 18 mm; pitch 100 mm • Note: Table-load rating does not represent rotary table load capacity • Spindle: • Motor power: 18.5 / 11 / 7.5 kW (duty dependent) • Tooling / ATC: • Max tool length: 350 mm • Max tool diameter: 80 mm (125 mm with adjacent pockets empty) • Tool-to-tool change: 1.3 s • Feed rates: • Rapid X/Y/Z: 42 m/min • Cutting feed: 1–42,000 mm/min • Utilities / dimensions: • Coolant tank capacity: 250 L • Floor space (approx.): 2,880 × 3,102 mm • Machine height (approx.): 2,807 mm • Included machine features (PD081 production package): • Workpiece air blast • High-pressure through-spindle coolant • Coolant flushing of machine covers • Synchronous tapping • CNC memory: 8 MB maximum program size • G00 Slope Constant rapid-movement optimisation Additional equipment Bedpfez Itghex Anqsww • Fourth axis: • Tsudakoma NC rotary table, model RNE-200L (Japan), with 250 mm faceplate • Fourth-axis preparation on machine • Chip management: • Left-side Crowther hinged-belt chip conveyor • Preparation for a left-side chip conveyor • Probing: • Renishaw OMP60 workpiece probe • Preparation for OMP60 on machine • Extraction: • Filtermist FX6002 oil mist extraction unit • Other: • Workholding system • Pneumatically powered coolant wash gun Technical Specification Taper Size SK 40

Condition: good (used), CNC turning/milling center Manufacturer: MAZAK Machine model: Integrex 200 2S Control: Mazatrol 640 MT pro TECHNICAL DATA Swinging diameter, max. (mm) 660 Turning diameter, max. (mm) 660 Max. turning diameter over slide (mm) 500 - 660 Bar work up to Ø (mm) 64 Workpiece weight - Chuck workpiece (kg) 100 - Shaft workpiece (kg) 150 Travel ranges - X-axis (mm) 580 - Z-axis (mm) 1,045 - Y-axis (mm) ± 80 - W-axis (mm) 1,050 - B-axis (degrees) -30 to +195 Rapid traverse speed - X-axis (m/min) 38 - Y-axis (m/min) 26 - Z-axis (m/min) 38 - W-axis (m/min) 30 - C-axis (rpm) 400 Feed rate range - X / Z / Y-axis (mm/min) 0 – 8,000 Main spindle integrated spindle motor - Speed range (stepless) (rpm) 35 – 5,000 - Drive power (kW) 22 - Max. torque (Nm) 349 - Spindle nose A2 - 6 inches - Indexing (degrees) 0.0001 Second spindle - Speed range (rpm) 35 – 5,000 - Drive power (kW) 18.5 - Max. torque (Nm) 326 - Indexing (degrees) 0.0001 Driven tools - Speed range (rpm) 15 – 12,000 - Drive power (kW) 15 - Max. torque (Nm) 120 - Tool holder Capto C6 Tool magazine - Number of tool positions 40 - Max. tool weight (kg) 10 Bwsde Ahynkopfx Anqjw - Max. tool diameter (mm) 90 - with free auxiliary positions, max. (mm) 125 - Max. tool length (mm) 300 - Tool change time (sec.) approx. 1.3 sec Connected load 62 kVA Operating voltage 400 V / 50 Hz EQUIPMENT FEATURES + Coolant tank capacity 220 liters + Chip conveyor, hinged belt type, discharge to the side + Automation alphaMAX ++ Industrial robot, designation Motoman NX 100 ++ Number of axes 6 ++ Load capacity 20 kg ++ Positional repeatability ± 0.06 mm DIMENSIONS and WEIGHTS Machine weight (kg) approx. 10,200 Machine footprint (mm) 3,820 x 2,060 Subject to change and errors in technical data and information.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm Bodpsz Nwapjfx Anqjww - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Condition: excellent (used), Year of construction: 2024, 2024 Mazak Integrex J-200S 5-Axis Multi-Tasking CNC Lathe With Mazatrol Smooth G Control Main Spindle Hainbuch Ø215mm 3 Jaw Power Chuck, Sub Spindle Kitagawa B-208 3 Jaw Ø210mm Power Chuck. Maximum Swing Ø530mm. Maximum Swing Over Cross Slide Ø530mm. Maximum Machining Ø500mm. Maximum Bar Working Capacity Main Spindle Ø65mm, Sub Spindle Ø51mm. Maximum Machining Length 910mm. Maximum Support Weight Main Spindle Chuck Work 200kg, Maximum Support Weight Sub Spindle Chuck Work 200kg. Axis Travel 'X'=450mm, 'Z'=1,119mm, 'Y'=200mm, ,W,=1,436mm, 'B'=–30° To 210° (5° Increment'), C'=0.0001° Increment. Rapid Traverse 'X'=40m/min, 'Z'=40m/min, 'Y'=40m/min, 'W'=30m/min,C'=555rpm. Main Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-6”. Spindle Bore Ø76mm, Sub Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-5". Maximum Milling Spindle Speed 12,000rpm (7.5kW Motor). 72 Position ATC. Spindle Nose Capto C6. Turning Tool Shank 25mm², Boring Bar Ø40mm, Maximum Tool Ø125mm, Maximum Tool Length 210mm. Power Requirement 35.34kVA. Power On Hours 2,127. S/No.354479 (2024). NOTE: A loading fee will be added to buyer's invoice of £100 + VAT. Bwjdpfo Ahg S Ejx Anqsw With Through Coolant System, Cromar Chip Conveyor, Habor HBO-750PTSBM8 Oil Cooler, Habor HJ-400PSBM2 Oil Cooler, GTI GT 10L Slim Oil Mist Extractor, Parts Cathcher, Foot Switches, Signal Tower, Tooling Package (Consisting Of Kitagawa B-208 3 Jaw Ø210mm Power Chuck, Hainbuch Collets & Assorted Tooling) & Manuals (CD). Overall Machine Dimensions L3,790 x W2,420 x H2,500 mm. Weight 9,800kg.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,736 h, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, overall weight: 2,600 kg, controller manufacturer: MAZATROL, controller model: T PLUS, number of slots in tool magazine: 8, number of axes: 2, CNC Lathe manufactured in 1996. This Mazak Quick Turn 10 features a maximum turning diameter of 160 mm and a turning length of 256 mm. It is equipped with a robust 8-station drum turret and a main spindle speed of up to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details. Bwsdpfx Ae Agvl Tenqew - Model Designation: Quick Turn 10 (Nameplate: QTN-10)- Year of Construction: 1996- Control Unit: Mazak MAZATROL T PLUS- Total Operating Hours (Gesamt / Betr. Zeit): 26,800 h 00 m 35 s- Automatic Machining Hours (Aut. Zers.): 9,151 h 11 m 30 s- Automatic Cycle Time (Aut. Abla.): 9,369 h 25 m 11 s- Pure Cutting Time (Rei. Zers.): 5,736 h 15 m 38 s- Max. Turning Diameter: 160 mm- Circumferential / Swing Diameter: 300 mm- Turning Length: 256 mm (Z-travel 290 mm)- Tool Turret: 1 Turret, 8-station drum turret- Tool Clamping: Block holder, shank 20 x 20 mm- Main Spindle Speed: Up to 6,000 rpm- Spindle Nose: A2-5- Spindle Bore: 50 mm- Drive Power: 7.5 kW- Bar Capacity: Ø 42 mm (Standard chuck 6" / 165 mm)- Tailstock: None visible / to be confirmed on inspection (optional MK 4) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2006, operating hours: 66,174 h, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details. • Table size: 900 x 410 mm • T-slots: 3 slots, 18 mm, 125 mm spacing • Spindle speed range: Stepless • Spindle taper: CAT 40 • Spindle bearing inner diameter: 70 mm • Spindle acceleration: 2.04 s • Rapid traverse: 36 m/min • Cutting feed: 1 to 8,000 mm/min (up to 36,000 mm/min) • Axis acceleration: 0.5 G • Max. tool diameter: 80 mm • Max. tool diameter (adjacent empty): 125 mm • Max. tool length: 350 mm • Tool change time: 2.9 s Bwsdpfsy Htgdex Anqsw • Spindle motor (AC): 18.5 / 15 / 11 / 7.5 kW • Power requirement: 27.8 / 22.82 kVA • Air supply: 5 bar, 200 l/min • Footprint: 2,000 x 2,600 mm • Spindle hours: 66,174 h

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 RPM with spindle cooling. X = 1660 Y = 510 Z = 510 1,000 kg capacity on the table Includes several high-quality vices. Weight: 9,100 kg Bwedszhv Uwjpfx Anqew BT 40 Includes a few tool holders. Capacity for 30 tools in the magazine. The machine must be picked up ex works no later than Monday of week 37.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,960 h, functionality: fully functional, machine/vehicle number: 238911, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,325 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,400 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,325 mm Table area (L x W): 800 x 800 mm Spindle speed: 8,000 rpm Spindle torque: 1,218 Nm Tool changer positions: 80 MACHINE DETAILS Number of pallets: 2 Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 3,000 x 3,500 mm Weight: approx. 30,800 kg Operating Hours (according to image) Operating hours: 54,415 h Power-on hours: 30,498 h Cutting hours: 25,960 h EQUIPMENT Bodpfjztqg Sex Anqsww Tool magazine for 80 tools, SK 50 DIN69871 Air blow-off device on the workpiece Interface for high-pressure cooling system 70 bar, Knoll Chip conveyor Preparation for Mazak Monitoring System B, optical probe type OMP60 Synchronized tapping Rapid traverse with constant pitch during angular movements 2-pallet changer Spindle with increased torque NC rotary table with 360,000 positions MAZAK Monitoring System B, optical probe type OMP60 Automatic tool length measurement

Condition: excellent (used), Year of construction: 2017, operating hours: 700 h, functionality: fully functional, turning length: 710 mm, turning diameter over cross slide: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, total height: 1,825 mm, total length: 3,385 mm, total width: 1,760 mm, overall weight: 5,750 kg, Equipment: documentation/manual, TOUR CNC 4 AXES MAZAK MAZATROL SMOOTH C YEAR 2017 CHUCK DIAMETER: 210 mm Bwedpfj Agvadox Anqjw MAX. MACHINING DIAMETER: 380 mm SPINDLE BORE: 76 mm BAR MACHINING: 65 mm SPINDLE SPEED: 5000 rpm TURRET TOOL SPEED: 5000 rpm 12-TOOL TURRET CHIP CONVEYOR ROBOT INTERFACE AUTOMATIC DOOR 3-COLOR LAMP MIST EXTRACTOR WEIGHT: 5750 kg 8 fixed tool holders 3 rotating tool holders

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Bwjdpfx Anjz Iw Ezsqew Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Bwsdpfx Aez D Dg Dsnqsw Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 460 mm Bjdpfx Aez Ihxlsnqoww Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Bwodpsy Ey N Nsfx Anqow Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor