Used Mazak Multiplex 6300 Cnc for sale (312)

Condition: good (used), Year of construction: 2005, turning length: 200 mm, turning diameter: 350 mm, Used Mazak Multiplex 6300 Max turning diameter approx. Ø 350 mm Cedpfsy I Sfusx Agtsrg Max turning length approx. 200 mm Many fine tools included "Auto operation" hours: 76,300 Gantry loader max. 2 x 40 kg 2 spindles, 2 axes per spindle (X/Z), C-axis, M-spindle Portal load and unload table

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Crjdpfxsyb S Nre Agtsg Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, overall weight: 8,500 kg, Technical Data | Specification Machine Type | CNC turning/milling center Control System | Mazatrol Fusion 640T Year of Manufacture | 1998 Spindles | 2 Turret | 2 Y-axis | ± 50 mm X-axis | 240 mm Z1-axis | 440 mm Z2-axis | 495 mm C-axis | 0.001° Max. Turning Diameter | approx. 260–320 mm* Bar Capacity | 51 mm Spindle Bore | 61 mm Spindle Speed | 35–5,000 rpm Spindle Motor | 22 / 15 kW Max. Torque | 349 Nm Spindle Nose | A2-6 Chuck | approx. Ø 210 mm Tool Positions | 2 × 12 Driven Tools | 2 × 12 Drive for Driven Tools | 3.7 kW Speed of Driven Tools | 25–4,500 rpm Tool Holder | VDI 40 Rapid Traverse X | 30 m/min Rapid Traverse Y | 10 m/min Crsdpfx Ajzx Sirjgtjg Rapid Traverse Z | 33 m/min Machine Weight | approx. 8.0–8.5 t Connected Load | approx. 76–77 kVA

Condition: good (used), Year of construction: 2008, turning length: 200 mm, turning diameter: 349 mm, Used Mazak Multiplex 6300Y CNC lathe Cedpfx Agoyvgbxetjrg Max turning diameter approx. 350 mm Max turning length approx. 200 mm Gantry loader max 2 x 40 kilograms 2 spindles, 3 axes per spindle + Y axis, C axis + M spindle Gantry loader, loading magazine, discharge conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Credpfx Agezg U Aketeg Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, functionality: fully functional, Mazak VTC 800/30SR CNC machining center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC machining center Year of manufacture: 2009 Condition: used, currently in production Operating hours: 34,000 hours Credpfxszy Ac Sj Agtsg Spindle speed: 18,000 rpm Tool magazine: 48 tools Further information will follow.

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, controller manufacturer: Mazatrol SMOOTHEZ, workpiece weight (max.): 1,200 kg, total height: 2,938 mm, total length: 3,816 mm, total width: 2,902 mm, table width: 600 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,000 kg, operating hours of spindle: 250 h, spindle motor power: 18,500 W, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9803 Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours  ATC 48 Position Optional Lehmann EA-520 R-Mi4 4e axis integrated Optional Lehman Tailstock  Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe  Optional tooling package ca 30 units Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 X - Travel: 1050mm Y - Travel: 600mm Z - Travel: 600mm Table Length: 1300mm Table Width: 600mm Crodpjzx Sprefx Agtsg Table load: 1200 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 48 Coolant through spindle / Bar:20 Number of controlled axis: 3+1 Chip conveyor: Yes Coolantsystem: Yes Length: 3816mm Width: 2902mm Height: 2938mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders Csdjx N A I Njpfx Agterg

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Crjdpfx Aozg U Tpegtsg Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm Csdpfjzal Rasx Agtorg - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: excellent (used), Year of construction: 2018, mazak j-200s technical dataFor this search query, no AI-generated overview is availableCurrently, an AI-generated overview cannot be provided. Please try again later.AI overview +6 The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a machining length of up to {\(910\text{\ mm}\)}. The B-axis offers a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining capacity:Max. swing diameter: {\(530\text{\ mm}\)}Max. machining diameter: {\(\emptyset 500\text{\ mm}\)}Max. machining length: {\(910\text{\ mm}\)}Main spindle & sub-spindle:Chuck size (main & sub-spindle): 8 inchesMain spindle speed: {\(5,000\text{\ min}^{-1}\)}Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)}Milling spindle (B-axis):Speed: {\(12,000\text{\ min}^{-1}\)} (typical for the j-series, may vary with optional configurations)Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or a total range of 220°)Tool interface: KM63 or CAPTO C6Axes & capacity:Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)})X/Z axes: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)}Tool magazine: 20–36 tools (depending on configuration)Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features a full C-axis for both spindles and an automatic tool changer, making it suitable for highly productive applications in a compact design. Codpsyfgdlsfx Agterg

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Csdpfsw Rm Diox Agterg Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, MAZAK QUICK TURN 350MY 1500U Max. machining diameter: 420 mm Max. machining length: 1,625 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 105 mm (!!!) Csdpfx Aszyal Dogtorg The machine is equipped with: - CNC control system Mazatrol SmoothG - KITAGAWA 3-jaw chuck BR-12, diameter 304 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm Crjdpfx Ajx Rkvqjgteg No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 22,000 W, number of axes: 3, This 3-axis Mazak Multiplex 6200 was manufactured in 1999 and features dual spindles with a maximum speed of 5,000 rpm and a drive power of 22/15 kW each. It includes an ABB robot and turrets on both the right and left with 12 tools each. Rapid traverse rates are 30.5 m/min for the X-axis and 33 m/min for the Z-axis. If you are looking to get high-quality turning capabilities consider the Mazak Multiplex 6200 machine we have for sale. Contact us for more information. Machine Benefits Cjdpfx Aox Nr S Dogterg Technical Machine Benefits • Right and left turrets: 12 tools each • Axes: 3; including abb robot • Main motor: 200 v

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Equipment: documentation/manual, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Crsdpfx Agjx Dccyotjg Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center Cjdezxpv Njpfx Agtorg 5-Axis (4 + 1 Positional) Variaxis J-500 Model Year 2013 Mazatrol Matrix Nexus 2 CNC

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Csdpfxozugfyj Agtorg Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, The machine has been very well maintained, regularly cleaned, and serviced. It is in near-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Max. steel sheet thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time: 8,212 h Cutting hours: 1,657 h Csdezt R R Ropfx Agtjrg Year of last overhaul: 2024 EQUIPMENT CE marking Documentation / manual Safety light curtain Shuttle table Extraction system

Condition: used, Year of construction: 1995, Manufacturer: Mazak Model: Multiplex 420 Year of manufacture: 1995 Control: Mazatrol T32-4 / depending on the version Number of spindles: 2 Number of turrets: 2 Number of tool positions: 12 + 12 = 24 Spindle nose: A2-6 Spindle bore: approx. 61 mm Bar diameter: approx. 51 mm / 2" Spindle speed: up to approx. 4,000 rpm Spindle motor: approx. 25 HP / 18.5 kW per spindle Max. turning diameter: approx. 318 mm Codszx Tf Uspfx Agtorg Max. diameter over cross slides: approx. 260 mm X-axis: 228 mm Z1-axis: 438 mm Z2-axis: 492 mm Max. distance between spindles: approx. 1,190 mm Tool holder: Modified VDI Turret: 12-position, drum/dodecagonal Machine weight: approx. 8.0–8.2 t

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, rotational speed (max.): 5,000 rpm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9804 Make: MAZAK Type: Integrex i-200ST x 1500U Codpfx Aezx Sh Iegtsrg Control: SmoothX Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation Lower revolver with Live tools 6000 Rpm IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Robotunits C4N Belt conveyor / Part catcher with side conveyor belt CAPTO SANDVIK Tooling package with 36 tools (ca 16 included Turn & Mill) Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Cedpfx Agsyt E Nvstjrg Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, overall weight: 4,380 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Mazak QuickTurn Nexus 200 CNC lathe features an 80 mm spindle bore and comes equipped with a bar feeder, collet chuck, and Matrix control. The machine has a weight of 4380 kg and includes tooling. If you are looking to get high-quality turning capabilities, consider the Mazak QuickTurn Nexus 200 machine we have for sale. Contact us for further details. Crsdpfx Ajzyub Hsgtsg • Spindle bore: 80 mm • Tailstock: Without tailstock Additional equipment • Bar feeder • Collet chuck • Tooling (unspecified) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 540 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,065 mm, controller model: Mazatrol 640, TECHNICAL DETAILS X-axis travel: 530 mm Y-axis travel: 140 mm Z-axis travel: 1,065 mm Z2-axis travel: 1,005 mm X-axis rapid traverse: 30,000 mm/min Z-axis rapid traverse: 33,000 mm/min Y-axis rapid traverse: 15,000 mm/min Z2-axis rapid traverse: 20,000 mm/min Milling spindle speed: 15–6,000 rpm Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm Max. swing diameter: 540 mm Chuck size: 8" Max. machining diameter: 540 mm Max. machining length: 1,018 mm Max. bar diameter: 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: 61 mm Spindle speed: 35–5,000 rpm Motor power (30-minute rating): 22 kW (?) Max. torque: 350 Nm Counter spindle Spindle nose: JIS A2-6" Spindle bore diameter: 44 mm Spindle speed: 35–5,000 rpm Motor power (10-minute rating): 7.5 kW Max. torque: 57 Nm Turret type: Spindle turret with ATC Tool size (external turning tool): 25 mm Tool size (internal turning tool): 40 mm Codpfszyl Hgex Agtjrg Max. milling tool diameter: 120 mm (?) Max. milling tool length: 250 mm Indexing time (90°): 0.5 s MACHINE DETAILS Control: Mazatrol 640 Coolant tank volume: 250 l Power consumption (continuous): 32.7 kVA Dimensions & Weight Dimensions (L x W x H): 3,485 x 2,105 x 2,416 mm Machine weight: 7,500 kg EQUIPMENT Documentation Chip conveyor

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Cjdju U R E Aopfx Agtsrg