Used Gea Mixer for sale (203)

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Top inlet Clamp 1". Side inlets Clamp 1" and 4". No documentation available. Cyclone dimensions: Dkedpfx Asy Hfxrekceu Length: 650 mm Width: 560 mm Height: 1510 mm

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Dkedpfjx Antuex Akcou Weight: approx. 850 kg

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor Dedpjz Harnsfx Akcjku sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Year of construction: 1995, condition: good (used), Item: M-2068-Collette-CVC50 Dkodpfx Akjh Dbvtoceu Mixer and aerator unit Manufacturer: Collette (GEA) Model: Converticoll CVC 50 Year of manufacture: 1995 For mixing and aerating dairy or confectionery products.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer this GEA COMAS LTH Type 400 automatic cake production line, manufactured in 2018, plus an ABRIGO ultrasonic cutting system, also manufactured in 2018. For sale is a complete GEA Comas line for the production of layered cakes, manufactured in 2018, consisting of: LTH main unit, TRA tray transfer, DRV and DPP cream and syrup depositing/metering stations, DVB unit, cream lifter-tilter, and syrup unit. Included: Abrigo "Flexcut Plus" ultrasonic cutting system for clean portioning, without deforming the cream/glaze. Functional industrial equipment, in very good condition, with minimal wear – the line has only been in operation for a short time, with few hours of use. Price upon request. Dkjdezk Hdhjpfx Akcju For details or to arrange a viewing, please contact us via message or phone. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Dsdpfx Ajz Harzekcjku Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm Dksdpoyrdlaofx Akceu L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s Dsdpoz Harhofx Akcsku with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C Djdpfx Akez Hkh Tjcoku grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: excellent (used), Model Gral 300 Total contents 300 litre Jacketed bowl with trolley Useful contents 1/2 tot 2/3 Power of mixer motor 16 -24 kW- double speed Rotation speed mixer arm I speed : 120 - II speed : 185 rpm Power of chopper motor 7- 9 kW – double speed dahlander Rotation speed chopper arm I speed : 1297 - II speed : 2524 rpm Hydraulic motor 1,5 kW Bowl Doubel wall jackted suited for heating and cooling Dimensions Dedegn Ehaspfx Akcjku Height 2.900 mm Depth 1.600 mm (without valve) Width 1200 mm ALL PRODUCT CONTACT PARTS AISI 316

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation Dksdpoyn Dy Nefx Akceu 3 months warranty for parts

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm Dedpoz Hkhtofx Akceku adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, for dry coatings all stainless steel belt width 630 mm adjustable speed Djdjz E Icljpfx Akceku with air knife with vibration plate digital - touchscreen overall dimensions (L x W x H) : ± 3.100 x 1.500 x 2.100 mm

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Grey cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front - 4 speeds with electric speed display - External spindle lock - Milling stop with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top + bottom Dksdezk Nk Ropfx Akceu - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment 220 mm - Table opening 300 mm - Effective length of milling spindle: 1890 mm - Extraction connection: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Availability: at short notice Storage location: Röllbach

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + Dkjdpfx Akezzwmhjceu “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. Dksdezmgqtopfx Akcsu The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery - GEA Procomac Opera palletizer - Complete pallet conveyor system - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Dksdpfoz Dxtxjx Akcsu Condition Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Automatic lubrication Dksdjz Imu Eopfx Akceu Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Dedpfjy Rtlzex Akceku

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Dsdjyx H Huspfx Akcjku

Condition: used, Year of construction: 1997, functionality: fully functional, GEA Westfalia MSD 140-96-076 Whey Clarifier Year: 1997 22,000L Dsdpfx Akozy Rlbscjku

Condition: used, Year of construction: 1980, functionality: fully functional, GEA Westfalia MSA 170-05-076 Whey Cream Separator Dkedpfx Aszy Rkwekcsu Year:1980 22,000L

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Dkodpfx Akeyfgwlecsu

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm Dkjdjz Eilbopfx Akcou adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, GEA crumb master. 600 wide belt. As new condition can be supplied with a wet coater. Dsdpfoz D Hqljx Akcsku