Used GEA Procomac Aseptic filling line 48000 BPH

GEA

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Product ejector (right) Knife cover Bowl cover Gkodpfj Aid Rmox Agljd Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Gkedpfx Agox D Hntsljd Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: used, all stainless steel Gjdpfx Ao Aid Rijglokd electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … Gkodpfo Aid Rbex Agled All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: refurbished (used), Year of construction: 2021, Used KUSTNER Ax Butter Packaging Machine Enhance your butter packaging process with the reliable and efficient KUSTNER Ax Butter Packaging Machine. This pre-owned model is designed for optimal performance, making it an excellent choice for dairy processors looking to streamline their butter packaging operations. Features: - High Efficiency: Designed to package large quantities of butter quickly and accurately, improving your production speed. - User-Friendly Interface:Equipped with an easy-to-navigate control panel, enabling operators to set up and adjust packaging parameters with minimal effort. - Versatile Packaging Options:Capable of accommodating various butter formats and sizes, providing flexibility for your packaging needs. - Durable Construction:Built to last with high-quality materials, ensuring reliability and durability in fast-paced production environments. Benefits: Gkjdpfx Agezxxyqsljd - Cost-Effective Solution:This used machine offers an affordable alternative to new equipment while maintaining high performance and reliability. - Consistent Quality: Achieve precision in packaging that ensures product integrity and maintains the quality of your butter. - Space-Saving Design: The compact structure allows for easy integration into existing production lines, optimizing your workflow. Invest in the used KUSTNER Ax Butter Packaging Machine to improve your packaging operations and meet market demands efficiently. Capacity: 55 pieces /minute Hopper Fed: Yes Controls: New Format: Oval French Cottage Style 125-200-250-500grams Available: Immediate

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, Equipment: cooling unit, documentation/manual, type plate available, Complete Dairy Processing Plant – 6,500 l/h – Milk, ESL Milk & Yogurt Production Main Equipment 2016–2022 | GEA, PRIAMO, GALDI 1. Outdoor Tanks - Raw milk cooling tank No. 1 o Manufactured by PRIAMO o 20,000 l o Jacketed o Equipped with agitator - Raw milk cooling tank No. 2 o Manufactured by PRIAMO o Manufactured in 2019 o 11,000 l o Jacketed o Equipped with agitator - Sterile tank for ESL milk o Manufactured by PRIAMO o Manufactured in 2019 o 27,000 l o Jacketed Gksdpfe Akfcqox Agljd o Equipped with agitator o With pumps, valves, and controls - Water tank o Manufacturer: unknown (made in Germany) o Single-walled o With agitator 2. Process Peripherals - Steam boiler o Manufacturer: RIELLO o Year of manufacture: 2016 o Pressure: 5-6 bar o Capacity: 1700 kg/h of steam - Water treatment unit - Compressed air system o Compressor 1  ALUP Allegro 26 CE  Year of manufacture: 2019  Pressure: 7 - 13 bar o Compressor 2  MARK RMB 26 IVR CE  Year of manufacture: 2022  Pressure: 7 - 13 bar o Compressor 3  ALUP Allegro 11  Year of manufacture: 2022 o Compressor 4  CECCATO CSA 20  Year of manufacture: 2016 o Compressed air tank  Year of manufacture: 2023  Volume: 2000 l o Various air filters and air dryer - Chlorine dioxide unit - Milk reception o Manufacturer: PRIAMO o Year of manufacture: 2016 o Capacity: up to 30,000 l/h o Valves by Bardiani o Plate heat exchanger by GEA o Pumps by CSF o With automation o All mounted on stainless steel frame - CIP Unit o Manufacturer: Priamo o Year of manufacture: 2016 o Number of circuits: 1 o Available tanks:  Acid  Lye  Fresh water  Return water  Hot water tank o Valves by Bardiani o Plate heat exchanger by GEA o Pumps by CSF o With automation - 2x complete ice water units with ice water storage tanks 3. Processing Department - Milk Pasteurizer Unit o Manufacturer: PRIAMO / GEA o Year of manufacture: 2016 o Capacity: 6500 l/h o Separator: GEA Easycream o Pasteurizer: GEA o Valves by Bardiani o With automation/controls o All mounted on stainless steel frame - Homogenizer o Manufacturer: GEA o Type: ONE75TF o Year of manufacture: 2016 o Capacity: 6500 l/h o Max. pressure: 200 bar o Stages: 2 o With controls - Yogurt Pasteurizer o Manufacturer: PRIAMO / GEA o Capacity: 6500 l/h o Pumps by CSF o Valves by Bardiani o With balance tank o With control cabinet/automation o With heat holding tubes o All mounted on stainless steel frame - Cream Tank o ~500 l o With agitator - ESL Processing Unit o Manufacturer: PRIAMO / GEA o Year of manufacture: 2018 o Capacity: 6500 l/h o Heating: up to 127 °C o With automation o All mounted on stainless steel frame 4. Filling and Packaging Department - 2x Process tanks (yogurt) o Manufacturer: PRIAMO o Year of manufacture: 2016 o Capacity: 6500 l/h o Jacketed o With agitator o With Bardiani regulation valves o With rotary lobe pump

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. The GEA Westfalia Separator AD 0509 is a high-performance two-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 300 mm and an extended drum length, this decanter offers optimal separation performance. Drum and Housing Design The flat-cone drum ensures even distribution of the processed medium and enables effective separation. The standard housing version provides a robust construction that meets the demands of industrial applications. Liquid Discharge The pressureless liquid discharge allows gentle removal of the separated liquids, improving the quality of the end product. This feature is particularly advantageous for applications requiring precise separation. Gedpfewnx Ngex Aglskd Drive Types The drum's belt drive delivers reliable, low-maintenance operation. The gearbox drive for the screw ensures efficient conveyance of solids, optimizing the overall performance of the decanter. With these features, the GEA Westfalia Separator AD 0509 is an excellent choice for companies seeking an effective solution for separating liquids and solids Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Gkodpfxez E Dfco Agled

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Gkedpfx Ags Ah R S Njlsd Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, all stainless steel suitable for thermal oil heating Gedpfx Ae Ah R S Eeglskd nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, Year of construction: 1998, overall weight: 2,000 kg, tank capacity: 47 l, Equipment: documentation/manual, TECHNICAL DETAILS Capacity: 47 liters Boiler dimensions: Ø 460 x 500 mm Material: Stainless steel 1.4401 (316) Surface: highly polished inside MACHINE DETAILS Blower Blower manufacturer: Meidinger, type HA-100-M3/825 Air flow rate: 360 m³/h Motor power: 3.0 kW Voltage: 400/690 V Gkedpo Ai Nbdjfx Aglsd Protection class: IP55 Dimensions and weight Dryer footprint: 1.2 x 0.9 m Overall height: 3.1 m Weight: 2,000 kg EQUIPMENT Mobile product container with a non-perforated Gill-type perforated plate Pump Steam heating Dust filter Control cabinet (as is) CE marking Note: Spray arm and spray nozzle are missing.

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor Gkjdpo Ah Ecujfx Aglod belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm